Manual
Table Of Contents
- 1. Security Precautions
- 2. Quick Start
- 3. Introduction
- 4. Interface Description
- 5. Operation
- 5.1 Introduction to the DobotStudio
- 5.2 Performing Teaching & Playback Tasks
- 5.3 Working in Offline Mode
- 5.4 Writing and Drawing
- 5.5 Performing Laser Engraving Tasks
- 5.6 Engraving a Grayscale Image
- 5.7 Controlling with your Hand Gesture
- 5.8 Controlling with your Mouse
- 5.9 Operating 3D Printing
- 5.10 Calibration
- 5.11 Connecting with WIFI Kit
- 5.12 Connecting with Bluetooth Kit
- 5.13 Operating Blockly
- 5.14 Scripting
- 5.15 Operating Stick Controller Kit
- 5.16 Operating Sliding Rail
- 5.17 Multiplexed I/O Demo
- Appendix A Dobot Magician Homing Operation
Dobot Magician User Guide 5 Operation
Issue V1.7.0 (2019-01-09) User Guide Copyright © Yuejiang Technology Co., Ltd.
151
The Saving Scrip File page is displayed.
The running log will be displayed on the lower pane of the Script page for checking.
Operating Stick Controller Kit
Dobot Magician can be controlled by stick controller kit without DobotStudio. Figure 5.185
shows the stick controller kit. From left to right: Stick controller, USB Host module, USB cable
(used for charging stick controller), Transceiver.
Figure 5.185 Stick controller kit
Prerequisites
Dobot Magician has been connected to a PC over USB cable.
Dobot Magician has been connected to the power adapter.
Procedure