Manual
Table Of Contents
- 1. Security Precautions
- 2. Quick Start
- 3. Introduction
- 4. Interface Description
- 5. Operation
- 5.1 Introduction to the DobotStudio
- 5.2 Performing Teaching & Playback Tasks
- 5.3 Working in Offline Mode
- 5.4 Writing and Drawing
- 5.5 Performing Laser Engraving Tasks
- 5.6 Engraving a Grayscale Image
- 5.7 Controlling with your Hand Gesture
- 5.8 Controlling with your Mouse
- 5.9 Operating 3D Printing
- 5.10 Calibration
- 5.11 Connecting with WIFI Kit
- 5.12 Connecting with Bluetooth Kit
- 5.13 Operating Blockly
- 5.14 Scripting
- 5.15 Operating Stick Controller Kit
- 5.16 Operating Sliding Rail
- 5.17 Multiplexed I/O Demo
- Appendix A Dobot Magician Homing Operation
Dobot Magician User Guide 5 Operation
Issue V1.7.0 (2019-01-09) User Guide Copyright © Yuejiang Technology Co., Ltd.
44
Items
Description
Pause time
Set the pause time for a save point
In both Easy and Pro modes, you can edit a highlighted save point such as copy, paste, cut,
switch between motion modes, modify name and coordinates, as shown in Figure 5.18.
Figure 5.18 The Save points list
Table 5.8 The Save points list
Items
Description
A right-click mouse
operation
In the right-click popup menu you can edit a highlighted save point such as copy,
paste, cut, insert, and delete, as shown in Figure 5.18
A double-click mouse
operation
Double-clicking a cell to modify its value
Pro mode: To enter the Pro mode from the current Easy mode, click the Easy/Pro slider,
as shown in Figure 5.19. Apart from all the functions in the default Easy mode, the Pro
mode allows the robotic arm to run a save point each time, detect lost-steps, work in offline
mode, and perform the multiplexed I/O interface. For details, see Table 5.9.