Manual
Table Of Contents
- 1. Security Precautions
- 2. Quick Start
- 3. Introduction
- 4. Interface Description
- 5. Operation
- 5.1 Introduction to the DobotStudio
- 5.2 Performing Teaching & Playback Tasks
- 5.3 Working in Offline Mode
- 5.4 Writing and Drawing
- 5.5 Performing Laser Engraving Tasks
- 5.6 Engraving a Grayscale Image
- 5.7 Controlling with your Hand Gesture
- 5.8 Controlling with your Mouse
- 5.9 Operating 3D Printing
- 5.10 Calibration
- 5.11 Connecting with WIFI Kit
- 5.12 Connecting with Bluetooth Kit
- 5.13 Operating Blockly
- 5.14 Scripting
- 5.15 Operating Stick Controller Kit
- 5.16 Operating Sliding Rail
- 5.17 Multiplexed I/O Demo
- Appendix A Dobot Magician Homing Operation
Dobot Magician User Guide 5 Operation
Issue V1.7.0 (2019-01-09) User Guide Copyright © Yuejiang Technology Co., Ltd.
48
Figure 5.23 Save the second position B and the end position C
Set the percentage of both speed and acceleration for playback, for example 50.
Set Loop to 2.
Click Start. The Dobot Magicin perfrom the sequence of ARC trajectory as taught
from its memory system, moving from positions A through C, as shown in .
Figure 5.24 Move the small cube in the ARC motion mode
Teaching & Playback Example
Application Scenarios
You can use Teaching & Playback function module to manipulate the Dobot Magician to
accomplish different tasks such as transportation or intelligent sort. This topic introduces how to
move small cubes from position A to B in the JUMP motion mode.
Prerequisites
The Dobot Magician has been powered on and connected to your computer.