Manual
Table Of Contents
- 1. Security Precautions
- 2. Quick Start
- 3. Introduction
- 4. Interface Description
- 5. Operation
- 5.1 Introduction to the DobotStudio
- 5.2 Performing Teaching & Playback Tasks
- 5.3 Working in Offline Mode
- 5.4 Writing and Drawing
- 5.5 Performing Laser Engraving Tasks
- 5.6 Engraving a Grayscale Image
- 5.7 Controlling with your Hand Gesture
- 5.8 Controlling with your Mouse
- 5.9 Operating 3D Printing
- 5.10 Calibration
- 5.11 Connecting with WIFI Kit
- 5.12 Connecting with Bluetooth Kit
- 5.13 Operating Blockly
- 5.14 Scripting
- 5.15 Operating Stick Controller Kit
- 5.16 Operating Sliding Rail
- 5.17 Multiplexed I/O Demo
- Appendix A Dobot Magician Homing Operation
Dobot Magician User Guide 1 Security Precautions
Issue V1.7.0 (2019-01-09) User Guide Copyright © Yuejiang Technology Co., Ltd.
3
Please turn off the Dobot Magician completely first before connecting or
disconnecting external equipment, such as Bluetooth, WIFI, stick controller, infrared
sensor, color sensor, etc. Or, it causes damage to your device.
Please wear the lasing protective eyeglass when using the laser module. Please
protect your eyes and skin from the laser.
The heating rod will produce high temperature up to 250℃ when using the 3D
printing module, please be careful.
Please DO NOT operate or turn off Dobot Magician when burning firmware, to avoid
machine damage.