Manual

Table Of Contents

Dobot MG400 User Guide

WARNING

 Before the operation, please wear protective clothing, such as antistatic uniform,

protective gloves, and protective shoes.

 It is prohibited to modify or remove the nameplates, instructions, icons and marks

on the robot and the related equipment.

 Before operating the equipment, please find and be familiar with the operation

method of the emergency stop function to ensure that the robot arm can be stopped

urgently in the case of sudden stress. The emergency stop function is Stop Category

 Be careful when carrying or installing the robot. Please follow the instructions on

the packing box to put down the robot gently and place it correctly in the direction

of the arrow.

 Please use the matched cables when connecting a robot to internal or external

equipment for personal security and equipment protection.

 Please ensure that the robot and tools are installed correctly.

 Please ensure that the robot has enough space to move freely.

 If the robot is damaged, do not continue to use it.

 Any impact will release a lot of kinetic energy, which is much higher than that under

high speed and high load.

Personal safety

When operating the robot system, please strictly follow the general precautions listed below to

ensure the personal safety of the operator.

WARNING

 Please comply with local laws or regulations with regard to the maximum weight

one person is permitted to carry.

 Do not touch the terminal blocks or disassemble the equipment with the power ON.

Otherwise, it may result in an electric shock.

 Please confirm that the equipment is well grounded, otherwise it will endanger

personal safety.

 Do not touch the terminal blocks or remove the interval circuit components within

10 minutes after the power is shut off, so as to avoid an electric shock since there is

residual capacitance inside the controller.