Manual

Table Of Contents

Dobot MG400 User Guide

⚫ Set the specifications and installation method of external cables in compliance with

local power distribution laws and regulations.

⚫ Do not remove the controller by yourself, otherwise it may cause electricity leakage.

⚫ Make sure the device is grounded.

⚫ Do not bend the cable excessively, otherwise it may cause poor contact or cable

breakage.

⚫ Make sure the power outlet for the control system is disconnected when connecting

an external device, otherwise it may cause an electric shock or device failure.

⚫ Use supporting cables to protect device and personal safety.

⚫ After wiring, ensure that there are no fallen screws or exposed cables in the device.

⚫ Do not plug or remove the power cable or communication cable when the device is

running normally.

⚫ Power on the device only after connecting all the cables required.

⚫ Ensure that the cables are connected correctly, otherwise, it may cause fault in

internal modules or external devices.

⚫ Before connecting, check whether there is breakage in the insulation and shield of

the external cables.