User's Guide

Table Of Contents

Dobot Magician Lite User Guide 5 Operation

Select the JUMP motion mode in the saving point area.

NOTE

To change the jogging speed percentage, drag the speed slider.

Set the lifting height (JumpHeight) and the maximum lifting height (Z Limit)

by selecting Setting > Playback > JumpParam, as shown in Figure 5.27.

Figure 5.27 Jump parameters

Jogging Magician Lite in the Cartesian or Joint coordinate system to move the

small cube to the end position B as required.

Unselect SucktionCup to turn off the air pump to release the small cube.

Click +Point to save the coordinate corresponding to the position B, as shown

in Figure 5.28.