User Manual

23
5.Rigiet App
If upgrading version is available for of the firmware of Rigiet, the user can
click Upgrade to upgrade Rigiet. During upgrade, please keep Rigiet in
charging state, and keep a stable communication between the phone and
Rigiet; otherwise, the upgrade may fail.
Firmware version and upgrade
1
Set the joystick control direction and sensitivity.
Joystick control setting
2
Check the battery capacity of Rigiet: Click the status bar of the APP to
enter the Expanding interface, and the remaining battery capacity will
be displayed on the top right corner.
Battery capacity
3
Remote control
The remote control refers to a control
method that the Rigiet App is connected with
Rigiet to realize the rotation control and
one-button centering from a remote distance
(distance within 3 m). The remote control is
mainly used for the close range vision angle and posture adjustment with
Rigiet not in hand.
5
Follow speed setting
6
The yaw follow speed setting option is used for adjustment of the Yaw
follow speed, and the pitch follow speed setting option is used for the
adjustment of the Pitch follow speed. The value (20, 40, 60, 80, 100)
represents the percentage of the current follow speed in the standard
follow speed.
Gyroscope calibration
1.After clicking this key, place the stabilizer
on a stationary platform (such as the
desktop). Carry out calibration according
to the prompt given on the interface. The
calibration takes only 5 s.
4
2.The gyroscope calibration is mainly used in case of environmental
temperature changes. That is to say, a gyroscope calibration is required
each time the Rigiet enters an environment of different temperature;
otherwise, when the stabilizer is in lock mode, the yawaxis will slowly
drift, but it has no impact on other follow mode.