Instructions / Assembly

DocaPole Light Bulb Changer Kit Assembly Instructions
1. Screw female threaded base of the Light Bulb Changer
attachment onto the male threaded metal tip of the
extension pole. Tighten the secure-fit locking screw
located on the side of the Light Bulb Changer
2. Make sure the suction cup is clear of any dirt or dust by
wiping with a dry cloth
3. To remove a blown bulb, Press Light Bulb Changer onto
the bulb to create a secure suction (if you are having
trouble achieving suction you may need to slightly
moisten suction cup) and slowly spin the pole until bulb
is fully unscrewed
4. To release suction after installing new bulb, gently pull
the release string after the new bulb has been fully
screwed into the socket