Instructions / Assembly

DocaPole 12ft Cleaning Head Assembly Instructions
1. To adjust extension pole length, raise thumb levers
and pull out pole segments to desired length, then
lower thumb levers to lock into place
2. Use the plastic hinge tip as needed to adjust the angle
of the desired attachment. Simply screw the female
plastic hinge tip directly onto the male metal tip of
the pole, then screw your attachment onto the
angled hinge tip (make sure it is locked into place by
turning the dial on the side).
3. Screw the Cleaning Head Brush directly onto the
Metal Tip of the Pole. If you need the brush to be at
an angle, use the included plastic Hinge Tip and adjust
the angle as needed.
4. Enjoy your DocaPole and Cleaning Head Brush!