Instructions / Assembly

DocaPole 12ft Roof Rake Assembly Instructions
1. To adjust extension pole length, raise thumb levers
and pull out pole segments to desired length, then
lower thumb levers to lock into place
2. Use the plastic hinge tip as needed to adjust the angle
of the desired attachment. Simply screw the female
plastic hinge tip directly onto the male metal tip of
the pole, then screw your attachment onto the angled
hinge tip (make sure it is locked into place by turning
the dial on the side).
3. Screw the Roof Rake onto the Metal Tip of the Pole. If
you need the rake to be at an angle, use the included
plastic Hinge Tip and adjust the angle as needed.
Remember to tighten the lug-nut on the side of the
rake to secure it to the pole.
4. Release the lever at the base of the rake to adjust the
tines, once the rake is in position, lock the lever in
place
5. Enjoy your DocaPole and Big Reach Hook!