Instructions / Assembly

DocaPole 24ft Soft Bristle Brush Assembly Instructions
1. To adjust extension pole length, raise thumb levers
and pull out pole segments to desired length, then
lower thumb levers to lock into place
2. Use the plastic hinge tip as needed to adjust the angle
of the desired attachment. Simply screw the female
plastic hinge tip directly onto the male metal tip of
the pole, then screw your attachment onto the angled
hinge tip (make sure it is locked into place by turning
the dial on the side).
3. Screw the Soft Bristle Brush directly onto the Metal
Tip of the Pole. If you need the brush to be at an
angle, use the included plastic Hinge Tip and adjust
the angle as needed.
4. Enjoy your DocaPole and Soft Bristle Brush!

Summary of content (1 pages)