Instructions / Assembly

DocaPole 30ft Cobweb Duster Assembly Instructions
1. To adjust extension pole length, raise thumb levers and pull
out pole segments to desired length, then lower thumb
levers to lock into place
2. Use the plastic hinge tip as needed to adjust the angle of
the desired attachment. Simply screw the female plastic
hinge tip directly onto the male metal tip of the pole, then
screw your attachment onto the angled hinge tip (make
sure it is locked into place by turning the dial on the side).
3. Screw the Cobweb Duster directly onto the Metal Tip of the
Pole. If you need the duster to be at an angle, use the
included plastic Hinge Tip and adjust the angle as needed.
4. Enjoy your DocaPole and Cobweb Duster!