Installation Guide
Blade™ & Blade Duo™
Installation Instructions
How to Install the Outlet
WARNING
BLADE PART #:
0290-30000
0290-30001
0290-30002
This in-drawer outlet is intended for charging
technology only. This outlet WILL NOT power
a hair dryer, curling iron, mixer or other types
of high-powered devices.
Visit our Specication Library at
www.dockingdrawer.com to nd:
Detailed Mounting Diagrams to plan your
installation, DXF and STEP Files for importing
into 2D and 3D layout programs, and our
Electrical Planning Guide to plan in-cabinet
power source for Docking Drawer outlets.
Tools Needed:
• Jigsaw
• Drill
• Measuring Tape
• Screwdriver
• Square
• Pencil
• Cutout Template
Time Required - 30 min
Step 1 - Verify the drawer dimensions.
Docking Drawer Blade and Blade Duo require
at least 2” behind the drawer box and at least a
15” wide drawer box.
DOCKING DRAWER
BLADE
DOCKING DRAWER
BLADE DUO
Step 2 - Remove the cutout template and
ip to the side that corresponds with your
product’s part number.
Step 4 - With a 1/2” drill bit, drill a hole in
each corner, being careful not to splinter the
wood on the inside of the drawer box. Using
one of the 1/2” holes, insert a jigsaw and then
make the required cutouts in the drawer box.
Step 3 - Locate the proper location for
the receptacle box cutout using our cutout
template. You can locate the proper location
from either the inside or backside of the
drawer box, making sure that the arms will
not interfere with the slides and that there is
enough material surrounding the receptacle
box to securely hold it in place.
BLADE DUO PART #:
0290-30100
0290-30101
0290-30400
0290-30102
0290-30402
• Failure to follow these instructions
can cause death or permanent injury.
Do not work on live electrical circuits!
Make absolutely certain power is o
before connecting the device!
• This product is for dry, indoor and
permanent installations only.
• Install the device in accordance with all
national and local electrical codes.
CAUTION – READ CAREFULLY
CUTOUT TEMPLATE
for Blade
BLADE PART #:
0290-30000
0290-30001
0290-30002
FOR ACCURACY SCALE PRINTER TO 100%