Installation Guide

Step 5 - Reinstall the drawer box and slide
the Docking Drawer Blade or Blade Duo
receptacle box through the cutout. Secure it
with the 4 wood screws provided.
Step 6 - Align arms. With the drawer mostly
closed, mark the position of the rear mounting
bracket. It is important to make sure the
drawer moves freely in and out and that the
arms are square and even. Spend sucient
time at this step before fastening the bracket
to the rear wall to make sure everything
is square and the arms are in the correct
position. Once that is done, secure with the
screws provided.
Step 7 - Install the
cover plate.
Step 8 - Connect the Docking Drawer power
cord to the in-cabinet electrical supply. For
more details about locating an in-cabinet
electrical supply for your Docking Drawer
installation, please refer to the Electrical
Planning Guide located in the Specication
Library at www.dockingdrawer.com.
Docking Drawer Blade and Blade Duo include a
resettable circuit breaker that prevents high-
powered devices from being used. The circuit
breaker trip is indicated by the white button
protruding approximately 3/8” out from the
cover plate. To reset, correct the source of
overcurrent and push the white button in.
BLADE DUO PART #:
0290-30100 0290-30101 0290-30400 0290-30102 0290-30402
How to Operate the Outlet
Docking Drawer
Blade™
Docking Drawer
Blade Duo™
CHARGING
Style Drawer
Flush™
Style Drawer
Blade™
Style Drawer
Blade Duo™
POWERING
Complete Outlet Lineup
TM
CUTOUT TEMPLATE for Blade Duo
FOR ACCURACY SCALE PRINTER TO 100%
Have questions? Need help? Call us!
[e-mail]
www.dockingdrawer.com
[phone]
12893 Alcosta Blvd, Suite M,
San Ramon, CA 94583
TM




Max output: 3 amps. Perfect for charging cell
phones, tablets, and laptops.
Max output: 20 amps, GFCI outlets. Perfect for
powering hair dryers, curling irons, and small
kitchen appliances.
KMG040919