Installation Manual

14
Dockmate is a registered trademark from PPA-Electronics B.V.
Leuvensesteenweg 177 – BE-3191 Boortmeerbeek – Belgium
VAT BE 0891.773.260 – Tel. [phone] – Mob. [phone]
[e-mail] – www.dockmate.eu – [e-mail] – www.ppa-electronics.com
11. Connecting the Thrusters
Both Bow and Stern thruster connection is the same and shown above
NOTE1: If the thruster operates in reversed direction in the DOCKCONTROL
Settings or by swapping Green and Brown wires.
NOTE2: Cables coming out of the thruster panel may have different colors depending
on the brand of the panel.
NOTE3: On some of the panels, there may be more than 3 wires, for example black
and yellow. They are not important for this connection.
NOTE4:This schematic applies for generic thrusters. When having ready made cable
with plugs, please consult manual for this type of thruster / cable.
NOTE5: White wire is unused. Yellow wire is used only for automatic switches (ie.
Sidepower).
In DockControl please select ‘Standard relay on-off type’. Default time - delay before
switching to other direction is 0.8s.