Instruction manual

Applications
124
◆ Shooting setting menu for videos
Change the settings for shooting using setting menu tab or
shooting setting menu icons displayed on the video
shooting screen.
･ Some items cannot be selected depending on the
combinations.
･ Some items cannot be set for the in-camera.
❖ Setting menu tab for videos
Tap or slide the menu tab displayed on the video shooting
screen to open the following menu.
■ Effect shooting
Set shooting effect.
■ Scene mode
Set shooting mode matching object or situation.
■ Focus mode, Exposure, Video audio, Adjust
flicker, Self timer, Switch data save destination,
Camera settings
Focus mode : Change auto focus mode according to the
object.
Exposure : Make setting for image brightness.
Video audio : Switch between ON and OFF for recorded
sound.
Adjust flicker : Reduce the flicker effect which a flicker or
stripe pattern emerges under a fluorescent lamp.
･ If it is not enough for shooting with [Auto], set according
to the area you use.
Self timer : Set self timer.
Switch data save destination : Select data saving location
(phone/SD card).
Camera settings : Tap [Restore to defaults] to restore the
camera settings to be default.
❖ Shooting setting menu icons for
videos
Tap the shooting setting menu tab displayed on the video
shooting screen to open the following menu.
■ Flash mode
Set to [ON] to light the camera light.
■ White balance
Adjust coloring to match the surrounding light source.
■ Video quality
Select a video quality.
■ Video size
Specify the image size.
◆ Barcode reader
JAN code (JAN8, JAN13), NW7 code, CODE39 code, QR
code data can be read and used.
･ QR code cannot be scanned for some versions (type and
size).
･ Scratches, dirt, damages, low print quality and the
strong reflection of light may disable code reading.
❖ Reading barcode
･ If the code is not scanned well, try to change the distance
between the code and camera, the angle or direction of
camera.
1
From the Application menu, [Still camera] →
m → [Switch Barcode Reader]