Instruction manual

Appendix/Index
153
･ When updating software, your private information
concerning F-10D (model, serial number, etc.) is
automatically sent to the server for software update
managed by DOCOMO. DOCOMO does not use the sent
information for purposes except software update.
･ When software update has failed, the terminal may not
activate or [Update failed] appears and all operations
may become unavailable. In that case, please bring the
terminal to DOCOMO-specified repair office.
･ When PIN code is set, the PIN code entry screen appears
during resetting after rewriting and you need to enter
PIN code.
･ While updating software, do not activate other
applications.
◆ Updating software automatically
Update file is automatically downloaded and software is
updated at the specified time.
❖ Auto-update setting
･ The settings of Software Update is set to [Automatic
Update] by default.
1
From the Home screen, m → [Settings]
→ [About phone] → [Software Update] →
[Configure the software update]
2
[Automatic Update]/[Manual Update]
❖ When software update is necessary
If the update file is downloaded automatically,
(software update available) appears on the status bar to
notify.
･ When the rewrite start time is reached with (software
update available) displayed, software is automatically
rewritten and (software update available)
disappears.
1
Open the Notification panel and tap the
notification
Software update notice screen appears.
2
Perform target operations
Closing confirmation : [OK]
Return to the Home screen. Updating starts when the
preset time is reached.
Changing preset time : [Sets Time]
For reserved update → P155 "Reserving software
update"
Rewriting immediately : [Starts update]
For updating immediately → P154 "Updating software
immediately"
✔ INFORMATION
･ If the software is not updated when the update
notification is received, (software update available)
appears on the status bar to notify.
･ If software update at the preset time could not be
performed, the software update will be performed at the
same time the following day.
･ Software cannot be updated automatically when the
Auto-update setting is set to [Manual Update] or while
updating software by Now update.
Rewrite notice screen