Instruction manual

Before using the terminal
27
■ Installing
a With the metal contacts side facing down, insert a
microSD card at the orientation shown until it locks
■ Removing
a Push the microSD card lightly and then release it, then
pull the microSD card straight out
✔ INFORMATION
･ Note that the microSD card may pop out of the terminal
when removing it.
◆ Attaching/Removing battery pack
･ Attach/Remove the battery pack after turning OFF the
power.
･ When you attach/remove the back cover, hold the
terminal in your hand so that you will not scratch the
display etc.
･ If the terminal gets wet, wipe off water before removing
the back cover.
･ Use Battery back F27 dedicated to the terminal.
■ Attaching
a Put your fingernail into the back cover removing part
and lift the back cover in the direction of the arrow
mark vertically to remove
･ To ensure waterproofness/dustproofness, the back
cover is structured to attach firmly. If you have
difficulties to remove, remove it strongly.
Battery pack
Back cover removing part