Instruction manual

Before using the terminal
38
◆ When lock screen appears
1
On the lock screen,
The lock is canceled.
✔ INFORMATION
･ Alternatively, slide your finger on the fingerprint sensor
to cancel the screen lock. When you operate after sleep
mode is deactivated by pressing the fingerprint sensor,
release your finger from the sensor and then slide the
finger.
･ Tap on the lock screen to activate camera.
･ Numbers of missed calls and new sp-mode mails are
displayed even when lock screen is displayed.
･ On the lock screen, the display is automatically turned off
according to the screen time out setting and the terminal
goes into sleep mode.
･ If the screen lock authentication is disabled, the
Notification panel can be opened on the lock screen.
◆ Task manager
If you cancel the operation of an application by pressing
B etc., the application may remain activated in the
background. Also, 2 or more applications may be running
depending on the operations. Activate Task manager to
check running applications or switch or close display.
1
B (1 sec. or more)
The recently used applications appear.
･ Tap a thumbnail to activate an application.
･ Touch and hold a thumbnail to delete from the list
or check application information.
2
[Task manager]
Running applications appear.
3
Perform required operations
Displaying applications : [Show]
Ending applications : [End]/[End all]
❖ Slide-in launcher
By default, you can display Slide-in launcher by sliding
your finger from the left end of the screen (slide spot). You
can activate an application or set up a shortcut from the
Slide-in launcher.
･ Settings and usage of Slide-in launcher → P89