Instruction manual

Settings
63
❖ Adding new access point (New APN)
･ Do not change the MCC/MNC to other than 440/10. The
settings disappears from the screen.
1
From the Home screen, m → [Settings]
→ [More...] → [Mobile networks] → [Access
Point Names]
2
m → [New APN]
3
[Name] → Enter a network profile → [OK]
4
[APN] → Enter the access point name → [OK]
5
Enter other items required by network
operator
→ m → [Save]
✔ INFORMATION
･ If you have changed MCC/MNC settings and they do not
appear on the APN name screen, reset to default or make
APN settings in [New APN].
❖ Initializing an access point
By initializing an access point, the default state is restored.
1
From the Home screen, m → [Settings]
→ [More...] → [Mobile networks] → [Access
Point Names]
2
m → [Reset to default]
✔ INFORMATION
･ You can select access point from the APNs list, m →
Tap [Delete APN] to remove access points one by one.
❖ sp-mode
sp-mode is ISP for NTT DOCOMO smartphone. In addition
to accessing Internet, you can use the mail service using
the same address as i-mode mail (@docomo.ne.jp), etc.
･ sp-mode is a service requiring subscription. For details
on sp-mode, refer to NTT DOCOMO website.
❖ Setting mopera U
mopera U is ISP of NTT DOCOMO. If you have subscribed
to mopera U, you can use Internet after making the simple
settings.
･ mopera U is a service requiring subscription.
1
From the Home screen, m → [Settings]
→ [More...] → [Mobile networks] → [Access
Point Names]
2
[mopera U]/[mopera U 設定 (mopera U
settings)]
✔ INFORMATION
･ [mopera U 設定 (mopera U settings)] is an access point for
setting mopera U. When you use the access point for
setting mopera U, packet communication charges for
setting do not apply. Note that you can set only the initial
setting screen or the change setting screen. For details on
mopera U settings, refer to mopera U website.