Instruction manual

Settings
68
✔ INFORMATION
･ The system requirements of a PC for USB tethering are as
follows. Operations on upgraded OS or added/modified
environment are not guaranteed.
- Windows XP (Service Pack 3 or later), Windows Vista
and Windows 7
･ To perform USB tethering with Windows XP, install
dedicated driver to a PC. For download information of the
dedicated driver, refer to the following website.
http://www.fmworld.net/product/phone/usb/ (in
Japanese only)
❖ Wi-Fi tethering
You can allow Wi-Fi devices to access the Internet by using
the terminal as Wi-Fi hotspot.
･ You can connect up to 8 Wi-Fi devices.
･ Only 2.4 GHz is supported for tethering. 1 - 13 channel
frequency bands can be used in Japan, and 1 - 11
channel frequency bands overseas.
❖ Setting Wi-Fi tethering
Set Wi-Fi tethering to ON for connection setting.
･ By default, [WPA/WPA2 PSK] is set for Security and
random characters are set for [Password]. Make the
security setting as required.
1
From the Home screen, m → [Settings]
→ [More...] → [Tethering]
2
Mark [Wi-Fi tethering]
･ You can also set ON/OFF by the setting switch on
the Notification panel.
3
Check the precautions and [OK]
4
[Network SSID] → Enter a network SSID
･ By default, "F-10D_AP" is set.
･ When changing registered setting, select
[Configure Wi-Fi hotspot] to display the setting
screen.
5
[Security] → Select a security
･ Security can be set to [Open], [WEP64], [WEP128],
[WPA PSK TKIP], [WPA PSK AES], [WPA2 PSK AES]
or [WPA/WPA2 PSK].
6
[Password] → Enter a password → [Save]
❖ Simple registration of Wi-Fi device
Register Wi-Fi device supporting AOSS  or WPS.
･ Set Wi-Fi tethering to ON in advance.
1
From the Home screen, m → [Settings]
→ [More...] → [Tethering] → [Easy Wi-Fi
registration]
2
Select a registration method
AOSS  system : [AOSS system] → Press AOSS 
button on the Wi-Fi device
WPS system : [WPS system] → [Push button system]/
[PIN entry system] → Set required items → On the
registration screen, [OK]
･ In case of push button method, press a dedicated
button on an access point. In case of PIN entry
method, enter PIN code displayed on the Wi-Fi
device and tap [OK].