Instruction manual
Table Of Contents

Settings
69
✔
INFORMATION
・
When number of AOSS
registration devices exceeds
24, a confirmation screen for deleting old registration
appears. To use AOSS
connection with new device, tap
[Yes].
・
To cancel AOSS
setting, on the [Configure Wi-Fi
hotspot] screen, tap [AOSS OFF].
・
For some Wi-Fi devices, AOSS
connection may not be
established. If connection is failed, use WPS connection
or connect manually.
・
Only 2.4 GHz is supported for AOSS
system.
◆
Setting Wi-Fi direct
Connect between Wi-Fi direct devices without routing an
access point etc.
・
To use this function, acquire and install an application to
use Wi-Fi direct function from Play Store.
1
From the Home screen,
m
→
[Settings]
→
[More...]
→
Mark/Unmark [Wi-Fi direct]
◆
Stopping packet connection
Some applications automatically perform packet
communications. Packet communication is kept active
unless you cut off the connection or the time-out is
occurred. Activate or deactivate packet communication as
required.
1
From the Home screen,
m
→
[Settings]
→
[More...]
→
[Mobile networks]
2
Unmark [Data enabled]
・
For Public mode (Drive mode), see "Call settings/
Others".
→
P55
◆
Setting Manner mode
Set/Cancel Manner mode.
・
You can change the Manner mode type.
→
P69
1
From the Home screen,
m
→
[Settings]
→
[Sound and Vibration]
→
[Manner mode]
2
Mark [Enable manner mode]
Status icons appear on the status bar. Icon varies by
the manner mode type. For each icon, see "Icons on
the status bar".
→
P36
✔
INFORMATION
・
Even in Manner mode, shutter sound, auto focus lock
sound for camera shooting, and count down sound for
self timer are emitted.
❖
Changing manner mode type
1
From the Home screen,
m
→
[Settings]
→
[Sound and Vibration]
→
[Manner mode]
→
[Select manner mode]
2
Selecting an item
Manner mode :
All sounds do not sound from the
terminal.
Manner mode (Silent) :
In addition to mute sounds,
turn off the vibration.
Manner mode (Alarm) :
Same operation as usual
manner mode except alarm volume and vibration
are according to the alarm settings.
Original manner :
Set sound volume and the vibration
for each sound type.
Sound and Vibration










