Instruction manual

Settings
74
◆ Checking the memory space
You can check memory space of the terminal, microSD
card, and USB mass storage connected via USB.
1
From the Home screen, m → [Settings]
→ [Storage]
･ For microSD card, volume of "Apps" is displayed
besides "Available" if any application is included.
◆ Erasing data in microSD card
(Format)
･ Note that this operation erases all data in the microSD
card.
1
From the Home screen, m → [Settings]
→ [Storage] → [Unmount SD card]
･ When precautions about unmount SD card appear,
Tap [OK].
2
[Erase SD card] → [Erase SD card]
･ When Security unlock method is set, authentication
is required.
3
[Erase everything]
Adjust the screen brightness or each function according to
the remaining battery level or at the set time for reducing
the battery consumption.
◆ Setting eco-mode
Set/Cancel eco-mode.
1
From the Home screen, m → [Settings]
→ [NX!eco] → Set each mode to [ON]
Timer eco-mode : Go into eco-mode at the set time
zone.
Battery care eco-mode : Go into eco-mode when the
remaining battery power becomes less than set
level.
Instant eco-mode : Go into eco-mode as soon as this
option is selected.
Status icon appears in the status bar. The icon varies
by eco-mode type. For each icon, see "Icons on the
status bar" → P36
✔ INFORMATION
･ The priority of eco-mode operations is as follows: a
Instant eco-mode,
b Battery care eco-mode, c Timer
eco-mode.
･ When [Cancel eco-mode when charging] is marked, eco-
mode is canceled while the battery is charging.
･ When the terminal is in default status, charge the battery
fully and then use this function. If charging is not enough,
"Battery care eco-mode" may not activate.
Storage NX!eco