Instruction manual

Settings
80
❖ Setting security unlock method
Set unlock the screen lock or type of authentication
operation for Password manager.
1
From the Home screen, m → [Settings]
→ [Security] → [Security unlock preference]
2
Authenticate
･ To set for the first time, authentication is not
required.
3
Select an unlock method
Entering pattern to unlock : [Pattern] → Slide like
jointing at least four points vertically, horizontally
and diagonally to enter a pattern → [Continue] →
Enter the same pattern → [Confirm]
･ When you set for the first time, "Securing your
phone" and "Example pattern" appear.
Entering security code to unlock : [Security code] →
Enter the 4- to 16-digit security code → [Continue] →
Reenter the security code → [OK]
Entering password to unlock : [Password] → Enter the
4- to 16-digit password including alphabets →
[Continue] → Reenter the password → [OK]
Using combination of fingerprint authentication and
other authentication to unlock : [Fingerprint] →
Confirm that 2 or more fingerprints are registered,
[OK] → [Pattern]/[Security code]/[Password] → Set
a pattern/security code/password following the
onscreen instructions → [OK]
･ If no fingerprints are registered, register 2 or more
fingerprints following the onscreen instructions.
･ To set security unlock method for the first time with
fingerprint registered, tap [Fingerprint] and the
fingerprint authentication.
Using fingerprint authentication to unlock :
[Fingerprint] → [None] → [OK] → [OK]
･ If no fingerprints are registered, register 2 or more
fingerprints following the onscreen instructions.
Unlocking by face authentication : [Face recognition]
→ [Set it up] → [Continue] → Fit your face to the
guide frame → [Continue] → Select a backup lock →
Set security unlock preference → [OK]
✔ INFORMATION
･ For using fingerprint authentication, confirm the
precautions and then register fingerprint
→ P82
･ Face authentication is only valid for unlocking screen. For
other security unlock except screen lock, use the unlock
method selected for backup lock.
･ To change set pattern, security code, password or
improve accuracy of face authentication, from the Home
screen,
m → [Settings] → [Security] → [Change unlock
pattern]/[Change security code]/[Change password]/
[Improve face matching] and then perform necessary
operations.
･ If you do not want to display the pattern when unlocking
the screen, from the Home screen,
m → [Settings] →
[Security] → Tap [Make pattern visible] to unmark.
･ To enable vibration when entering the pattern, security
code, password or fingerprint authentication, from the
Home screen,
m → [Settings] → [Security] → Tap
[Vibrate on touch] to mark.