Instruction manual

34
Basic Operation
Sound/Screen Setting
Sound settings
You can set tones, such as changing a ring alert,
adjusting the volume, or muting the sound
emitted from FOMA terminal.
You can set your favorite melody, etc. for a ring
alert.
<Example> Setting voice call ring tone
a meh Setting eb Sound/Vibration/
Manner
ea Ring tone ea Call ring tone
e Set required items eC [Set]
Point
･ When Voice call ring tone is set, the setting applies to
Incoming call.
･ Some music or moving pictures/i-motion may not be
set to the ring alert.
You can set the volume of a ring alert, alarm
sound, etc.
a meh Setting eb Sound/Vibration/
Manner
ec Adjust volume e Select an
item
ek or SDeg [Select]
You are notified of an incoming call or alarm with
vibration, instead of sound.
a meh Setting eb Sound/
Vibration/Manner
ed Vibration mode
e Select an item e Select a vibrate alert
This function mutes the sound emitted from the
FOMA terminal such as ring alert, Keypad sound,
open/close operation sound, Alarm sound,
confirmation sound for reading a code with Bar
code reader, and notifies incoming calls with
vibrator (vibration). The microphone is sensitized
in Silent mode, and you can call in a small voice.
a # (1 sec. or more)
appears on the stand-by display in Silent
mode (manner mode).
Canceling Silent mode (manner mode) : #
(1 sec. or more)
Point
･ Shutter sound, Auto focus lock sound for shooting
still pictures, and count down sound of Auto timer
are emitted even in Silent mode.
Set sounds emitted for key operation, opening/
closing the FOMA terminal, and shutter sound for
shooting still images or moving pictures
(including recording for Voice recorder).
a meh Setting eb Sound/Vibration/
Manner
eb Other sounds ed System
sound
e Select an item e Select a sound
Point
･ Even if Keypad sound is set to on, no sound is made
while i-
α ppli is activated.
Ring tone
Adjust volume
Vibration mode
Silent mode
System sound