Instruction manual

72
More Convenient
Setting Access point (APN)
Set an access point to use for external connection
in AP mode.
a mef Tool e "Wi-Fi" eb Access
point (main)
ec Access points (APN)
b Select an access point (APN) eC
[Save]
Select "<Not recorded>" and press a to
add new APN.
Point
･ mopera U is registered by default. "mopera U 128k"
is set as the access point (APN).
Setting access point
a mef Tool e "Wi-Fi" eb Access
point (main)
ea AP mode ON or b AP
local mode ON
e "Yes"
By default, a confirmation screen for using AP
mode appears when AP mode ON is set.
b Set connection on the Wi-Fi device
Register the SSID set in the FOMA terminal to
Wi-Fi device. For operation, see the instruction
manual of the Wi-Fi device. Enter the same
encryption key as one of Authentication type
in Access point settings. If you set MAC
address filter, MAC address on the Wi-Fi
device should be registered in advance.
c Connect the FOMA terminal and Wi-Fi
device
With connecting the access point for small scale
network such as home network or Public wireless
LAN service as a client (Sub unit), you can view
websites or download/upload data in high-speed.
Setting a new network
Register access point information to the FOMA
terminal.
･ For settings on access point or necessary
information for registration, see the instruction
manual of the access point etc.
a mef Tool e "Wi-Fi" ea Client
mode (sub)
ec Network setting
b Select a method for registering access
point in the FOMA terminal
Point
･ When entry of encryption key (WEP or PSK) is
required, enter the security key set to the access
point.
Connecting access point
Set Wi-Fi mode to ON to search registered access
point and connect it. Start browser software to use
Internet via Wi-Fi.
a mef Tool e "Wi-Fi" ea Client
mode (sub)
ea Wi-Fi mode ON
Client mode (Sub unit)