Instruction manual

Getting Started 25
1 Earpiece (receiver)/Speaker
2 Proximity/Illuminance sensor
• Hides tappable icons on the touch panel
when your face comes close to the
touch panel. This prevents you from
unintentionally activating functions when
you are engaged in a call.
• Detects the brightness around the
terminal and automatically adjusts the
illuminance of the display. →P.75
3 Notification LED
4 Display (Touch panel)
• Allows you to scroll the screen on the
display or tap to select objects. →P.33
5 Mouthpiece/microphone
6 r Back key
• Returns you to the previous screen.
7 h Home key
• Shows the Home screen by shortly
pressing it.
• Shows a list of applications activated by
pressing it for a long time.→P.49
8 m Menu key
• Shows the menu of the screen you are
operating on.
9 Power key
• Powers the terminal on/off or sets it in
sleep mode.
a External connector terminal
• Provides connections to the adapters,
earphone/headphone, and PC, etc.
b 1Seg antenna
• Catches radio waves of 1Seg. Extend
the antenna for more sensitivity.
c Strap slot
d u/dVolume UP/DOWN key
• Increases or decreases the speaker
volume.
e Infrared data port
• Serves for infrared data exchange.
f Light
•
Turn it on when taking a picture as needed.
g GPS antenna section*
h Camera
• You can use the camera to take videos
or photos. →P.108
i e mark
• Put the mark close to the reader when
using おサイフケータイ (Osaifu-Keitai).
j UIM slot
• Set the UIM to the slot. →P.26
k microSD card slot
• Set the microSD card to the slot. → P.27
l Back cover
m FOMA antenna*
*The antennas are built-in. To ensure good
signal quality, avoid covering the antenna
section with your hands.
NOTE
 Do not put labels or stickers on the sensors.
UIM
UIM is an IC card that stores your phone
number and other information.
You cannot use some of the FOMA terminal
functions if the UIM is not inserted. Before
inserting or removing the UIM, you must
always turn the power OFF and disconnect
the AC adapter cable.
● UIM security codes
The UIM has two types of security code,
namely PIN1 code and PIN2 code. The codes
are set to "0000" at the time of subscription,
but you may subsequently change them. For