Instruction manual

Getting Started 31
6 Remove the AC adapter
connector horizontally from
the connection terminal of
the FOMA microUSB Adapter
N01 for charging.
• Pull out the AC adaptor connector
horizontally while squeezing the release
clips on both sides of its connector
together.
7 Remove the AC adapter from
the power outlet.
Charging with a PC
1 Open the external connector
terminal cover of the FOMA
terminal.
2 Insert the microUSB plug of
the microUSB cable for PC
connection (sample)
horizontally into the external
connector terminal of the
FOMA terminal.
• Insert the microUSB plug horizontally
with the engraved side facing down.
3 Insert the other USB plug of
the microUSB cable for PC
connection horizontally into
the PC USB port.
4 When charging is completed,
remove the microUSB plug
horizontally from the FOMA
terminal and close the
external connector terminal
cover.
5 Remove the USB plug
horizontally from the PC USB
port.
Turning Power ON and
OFF
Turning power ON
1 Press and hold the power
key for 2 seconds or longer.
• The lock screen appears.
• If "PIN1 code entry set" is enabled,
"Enter PIN code screen" appears when
power is turned on. Enter the PIN code
Surface with
engraved mark
downwards
microUSB cable for
PC connection (sample)
Open the external connector
terminal cover