Instruction manual

70 Settings
If the "Show password." checkbox is
marked, all entered characters will be
displayed.
• From the "Wi-Fi settings" screen, press
m → "Change priority" to change the
priority of connections.
NOTE
There are 2 types of available networks -
open networks and protected networks. The
network type is indicated by an icon at the
network name. represents an open
network and represents a protected
network.
The icon also indicates the signal strength.
Depending on the access point settings,
the network connection name of an
available network may not be displayed. If
this happens, you can still connect to the
network. See "Adding a Wi-Fi network"
(P.71).
When establishing a Wi-Fi network
connection, the required IP information is
obtained from a DHCP server in the network
automatically. However, it is possible to
specify these items separately. For more
information, see "Connecting to a Wi-Fi
network by specifying a static IP address"
(P.70).
● Connecting to a Wi-Fi network by
specifying a static IP address
1 From the Home screen, m
→ "Settings" → "Wireless &
networks" → "Wi-Fi settings".
2 m → "Advanced" → "Use
static IP".
• A mark appears in the "Use static IP"
checkbox, meaning that you can now
enter the 5 items required for Wi-Fi
network connection ("IP address",
"Gateway", "Netmask", "DNS 1" and
"DNS 2").
3 Tap "IP address", "Gateway",
"Netmask", "DNS 1" and
"DNS 2" in that order.
• A menu appears for each item. Set the
appropriate value for each item.
● Notifying of unprotected Wi-Fi
networks detected
1 From the Home screen, m
→ "Settings" → "Wireless &
networks" → "Wi-Fi settings".
2 Mark the "Wi-Fi" checkbox.
3 Mark the "Network
notification" checkbox.
• You are automatically notified of
unprotected Wi-Fi networks detected.
Strong signal
Weak signal