Instruction manual

Settings 71
NOTE
Turn on Wi-Fi in advance.
● Adding a Wi-Fi network
1 From the Home screen, m
→ "Settings" → "Wireless &
networks" → "Wi-Fi settings".
2 "Add Wi-Fi network"
3 Tap the "Network SSID" box
and enter the network SSID.
4 "Security"
• The "Security" menu appears. Select
the appropriate type from "Open",
"WEP", "WPA/WPA2 PSK", and "802.1x
EAP".
• Enter security information for the
added Wi-Fi network as needed.
5 "Save"
NOTE
See "Location & Security" (P.75) for
installing certification used for "802.1x
EAP".
● Connecting to a Wi-Fi network
using easy Wi-Fi setup
When you connect to a Wi-Fi network by
using, for example, an access point (wireless
LAN router (base unit), etc.) supporting "らく
らく無線スタート" (Easy Wireless Setup), you
can skip the encryption key input.
1 From the Home screen, m
→ "Settings" → "Wireless &
networks" → "Wi-Fi settings"
→ "Wi-Fi Easy settings".
2 "Easy Wireless Setup"
• Keep touching the easy setup button
until the POWER LED blinks in Green on
the access point.
• Again, keep touching the easy setup
button until the POWER LED is lit
Orange on the access point.
• When the status bar shows , you
are accessible to the Wi-Fi network.
● Setting Sleep function for Wi-Fi
network
1 From the Home screen, m
→ "Settings" → "Wireless &
networks" → "Wi-Fi settings".
2 m → "Advanced" → "Wi-Fi
sleep policy".
• A menu appears.
3 Select "Not use for 15min
when screen is off", "Never
when plugged in" or "Never".
● Changing the Wi-Fi network
password
1 From the Home screen, m
→ "Settings" → "Wireless &
networks" → "Wi-Fi settings".