Instruction manual

246
Appendix/Index
■
Display
■
Sound
■
Display data
■
Camera
■
1Seg
Calls are not connected.
(Even when moving "
圏外
(out of service area)" does
not disappear, or although radio waves are enough,
making/receiving calls is unavailable.)
･
Turn the power OFF and ON, or remove and
attach UIM.
P. 3 0
P. 3 7
･
Due to the nature of radio waves, making/
receiving calls may be unavailable even
when "not out of service area" or "
appears on the display for the radio wave
condition". Move to the other place and call
again.
−
･
Due to the crossing of radio waves, at the
crowded public places, calls/mails are
crossed and the connection status may not
be good. Move to other place or call again
at other time.
−
The display is dim.
･
Check if the backlight time-out is set. P.123
･
Check if the brightness of screen is
changed.
P. 1 2 2
･
Check if you activate eco
モード
(eco mode).
P. 7 5
･
Check if you cover the Proximity sensor with
sticker etc.
P. 2 9
･
When the temperature of the terminal
becomes high while using, the display may
become darker. It is not abnormal.
−
During a voice call, the distant party's voice is hard
to listen to or too loud.
･
Check if the listening volume of the sound
volume setting is changed.
P. 8 4
Images or ringtones set in each feature do not work
and the terminal operates in the default data.
･
Is the inserted UIM the same one that is set
when the images or ringtones are
obtained?
−
Still images and video taken with the camera are
blurred.
･
Check if clouds or dirt attach to the lens of
camera.
−
･
To shoot a portrait image, use the face
detection function.
P.177
･
Shoot using shake reducing function. P.184
P.190
Watching 1Seg is unavailable.
･
Are you out of terrestrial digital TV
broadcasting service area or in a place
where airwave is weak?
−
･
Is channel set? P.216