Scans ID Cards & Licenses Quickly and Conveniently User Guide
CE Conformity and FCC Statement ………………… This equipment has been tested and found to comply with the limits of the European Council Directive on the approximation of the member states relating to electromagnetic compatibility according to EN 55022/55024 Part 15 B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Contents ………………… CE conformity and FCC Statement …………………………1 Introduction to DocketPORT® 667 Scanner ………………2 Installation of Software & Hardware ………………………3 Initial Setup with PageManager 7………....…………….…. 6 Using Your Scanner ……….……..…………………..…….. 7 Tips & Cautions ……………………………………………8 Technical Support & Product Warranty Information ……..11 Welcome ………………… Thank you for purchasing our DocketPORT® 667 document scanner.
Installation of Software & Hardware ………………… **(FOR BEST RESULTS PLEASE INSTALL THE SOFTWARE FROM THE CD PROVIDED BEFORE PLUGGING IN YOUR SCANNER!)** Note: As a precaution, a RED warning label has been placed over the computer end of the USB plug to remind you to install the software CD first. Remember to remove this warning label prior to using the USB cable. Install Scanner Driver Software a) Insert the installation CD into your CD-ROM drive. b) The installation program will begin automatically.
Fig. 5 Fig.6 g) At the end of the driver installation process you will be redirected back to the main menu. h) You can either install the PageManager7 or Adobe Reader 8.0 application now or later. Note: After you have completed all your software installations, we strongly recommend that you restart your computer even though you are not requested by Windows to do so.
Install Scanner hardware a) b) c) Connect the USB cable provided to your computer and scanner. Make sure the red warning label is removed before connecting this end to your computer. You may need to reconnect the cable to another USB port on your computer if the scanner cannot be detected initially. (Check your computer’s user guide to identify other available USB ports and their locations. Fig. 1 d) Fig.
Initial Setup with PageManager 7 ………………… NOTE: Calibration is a critical step in setting up your scanner. This process will balance the image quality between your computer and the scanner unit. If at any time you switch the scanner to another computer then you will need to reinstall the scanner driver and recalibrate the scanner. Selecting Scanning Source a) When using Presto! PageManager7 for the first time you will need to define the Scanning Source this application will be using.
Using your Scanner ………………… Defining your document and image settings with your Presto! PageManager7. 1) TWAIN Custom Settings control panel page allows you to select from the most common paper sizes, image settings and basic file output information. 2) Scanned image files are saved and displayed as JPEG format. 3) The TWAIN control panel (shown above) allows you to control all details and settings of the scanner. This type of “fine-adjustment” may be necessary for some of your document need.
Tips & Cautions ………………… Your DocketPORT® 667 scanner will provide you a long and productive service. We encourage you follow the suggestions listed below to prolong your investment and improve the convenience and quality of your scanning and document management experience. Do not introduce stapled items or pages into the scanner. Do not scan documents that have chipped or un-dried White-Out. Do not insert any type of adhesive material, even POST-IT paper.
Technical Support & Warranty ………………… FREE SUPPORT THROUGH EMAIL & WEB Visit our website at www.docucap.com. Click the Support section where you can access valuable information including: Installation guides, FAQ’s, spare parts ordering, troubleshooting, driver downloads, and email your scanner issue to support@docucap.com. TECHNICAL SUPPORT BY TELEPHONE 1-408-436-6152 (10:00 A.M. - 5:00 P.M. U.S.
