Specifications

Chapter 3
3 - 2
Using the LCD panel
You can configure the LCD panel to meet your needs. The following section
describes how to perform a number of tasks with the LCD panel:
• Pause on a screen
• Use the LCD menus
• Power up the unit
• Halt the unit
• Power down the unit
• Reboot the unit
Pausing on a screen
Normally, the screens cycle on the LCD at a constant rate. However, push
the Check button to toggle the LCD between Hold and Rotate modes. In
Hold mode, a single screen is displayed. The Rotate mode changes the
screen displayed on the LCD every 4 seconds.
Using LCD menus
Pressing the X button puts the LCD panel in Menu mode. The buttons Left
Arrow, Right Arrow, Up Arrow, and Down Arrow are only functional when
the LCD is in Menu mode.
Powering up the unit
When you want to power on a unit that is shut down, press the Check button
to turn the power on.
Halting the unit
We recommend you halt the unit before you power it down or reboot it
using the LCD menu options.
To halt the unit
1. Press the X button, then use the arrow keys to navigate to the
System menu.
2. Press the Check button. Navigate to the Halt menu.
3. Press the Check button. Press the Check button again at the
confirmation screen.
4. Wait 30 seconds before powering the machine off or rebooting it.