User's Manual

When changing a rear wheel, assemble the jack drive

tube to the jack and connect the drive tube to the

extension tube. Place the jack under the axle between the

spring and the shock absorber with the drive tubes

extending to therear. Connectthejacktube extension and

wheel wrench.

Before raising the wheel off the ground, make sure that

the jack will not damage surrounding truck parts and

adjust the jack position as required.

NOTE: If the jack will not lower by turning the dial

(thumb wheel) by hand, it may be necessary to use the

jack drive tube in order to lower the jack.

2500/3500 4X2 Jacking Location

WHAT TO DO IN EMERGENCIES 303