2011 Challenger 2011 Chrysler Group LLC 11D491-126-AA OWNER’S MANUAL O First Edition C h a l l e n g e r SRT Printed in U.S.A. 291701.ps 11D491-126-AA Chrysler 1" gutter 09/23/2010 15:40:18 2011 Challenger 2011 OWNER’S MANUAL Chrysler Group LLC 11D491-126-AA First Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . . 7 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents.
INTRODUCTION 5
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 䡵 Vehicle Security Alarm . . . . . . . . . . . . . . . . . . . 18 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . 12 ▫ Rearming Of The System . . . . . . . . . . . . . . . . 18 ▫ Key FOB . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 18 ▫ Removing Key FOB From Ignition . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Open The Trunk . . . . . . . . . . . . . . . . . . . . 25 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 40 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 25 䡵 Trunk Lock And Release ▫ Programming Additional Transmitters . . . . . . 26 䡵 Trunk Safety Warning . . . . . . . . . . . . . . . . . . . 41 ▫ Transmitter Battery Replacement . . . . . . . . . . 26 ▫ Trunk Emergency Release . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belts And Pregnant Women . . . . . . . . . . 55 䡵 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 ▫ Seat Belt Extender . . . . . . . . . . . . . . . . . . . . . 55 ▫ Transporting Passengers . . . . . . . . . . . . . . . . 80 ▫ Supplemental Restraint System (SRS) - Air Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the Key Fob into the ignition switch with either side up. Wireless Ignition Node (WIN) The Wireless Ignition Node (WIN) operates similar to an ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired position. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove the emergency key, slide the mechanical latch Removing Key Fob From Ignition at the top of the Key Fob sideways with your thumb and Place the shift lever in PARK. Turn the Key Fob to the OFF position and then remove the Key Fob. then pull the key out with your other hand. With the Keyless Enter-N-Go system, the EVIC will display the ignition switch position “OFF/ACC/RUN”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 WARNING! CAUTION! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the Key Fob in the ignition or a vehicle equipped with Keyless Enter-N-Go in the ACC or ON/RUN mode. A child could operate power windows, other controls, or move the vehicle. • Do not leave children or animals inside parked vehicles in hot weather.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE will cause the reminder chime to sound. Refer to “Start- seconds for a bulb check. If the light remains on after the ing Procedures” in “Starting And Operating” for further bulb check, it indicates that there is a problem with the electronics. This condition will result in the engine being information. shut off after two seconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Duplication of Key Fobs may be performed at an authorized dealer, this procedure consists of programming a NOTE: Only Key Fobs that are programmed to the blank Key Fob to the vehicle electronics. A blank Key Fob vehicle electronics can be used to start and operate the is one that has never been programmed. vehicle. Once a Key Fob is programmed to a vehicle, it cannot be programmed to any other vehicle.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • This device must accept any interference that may be Rearming Of The System received, including interference that may cause unde- If something triggers the alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn the horn sired operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 2. Perform one of the following methods to lock the NOTE: • The driver’s door key cylinder and the trunk button on vehicle: the RKE transmitter cannot arm or disarm the Vehicle • Press LOCK on the interior power door lock switch Security Alarm. with the driver and/or passenger door open. • The Vehicle Security Alarm remains armed during • Press the LOCK button on the exterior Passive Entry trunk entry.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE vehicle and open a door, the alarm will sound. If this Tamper Alert If something has triggered the Vehicle Security Alarm in occurs, disarm the Vehicle Security Alarm. your absence, the horn will sound three times when you If the Vehicle Security Alarm is armed and the battery disarm the Vehicle Security Alarm. Check the vehicle for becomes disconnected, the Vehicle Security Alarm will tampering. remain armed when the battery is reconnected.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 NOTE: Inserting the Key Fob with RKE transmitter into the ignition switch disables the system from responding to any button presses from that RKE transmitter. Driving at speeds 5 mph (8 km/h) and above disables the system from responding to all RKE transmitter buttons for all • The Illuminated Entry system will not operate if the RKE transmitters. dimmer control is in the “Dome defeat” position (extreme bottom position).
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock The Doors Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice within five seconds, to unlock both doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. • When not using the EVIC, perform the following steps: 1. Press and hold the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 activated will cause the alarm to sound. Press the UN- 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transmitter LOCK button to deactivate the Security Alarm. with the ignition switch in the OFF position and the Key Flash Lights With Remote Key Lock Fob removed. This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- 4.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Doors • When not using the EVIC, perform the following Press and release the LOCK button on the RKE transmitsteps: ter to lock both doors. The turn signal lights will flash 1. Press the LOCK button on a programmed RKE transand the horn will chirp to acknowledge the signal. mitter for at least 4 seconds, but no longer than 10 secRefer to “Keyless Enter-N-Go” under “Things To Know onds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Alarm. Opening a door with the Security Alarm activated Using The Panic Alarm will cause the alarm to sound. Press the UNLOCK button To turn the Panic Alarm feature ON or OFF, press and hold the PANIC button on the RKE transmitter for at to deactivate the Security Alarm. least one second and release.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • You may need to be less than 35 ft (11 m) from the vehicle when using the RKE transmitter to turn off the Panic Alarm due to the radio frequency noises emitted by the system. 2. Remove and replace the battery. When replacing the battery, match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • This device must accept any interference received, maintaining security. The system has a range of approxiincluding interference that may cause undesired mately 300 ft (91 m). operation. NOTE: The vehicle must be equipped with an autoNOTE: Changes or modifications not expressly ap- matic transmission to be equipped with Remote Start.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • RKE PANIC button not pressed. To Enter Remote Start Mode Press and release the REMOTE START button • System not disabled from previous remote start event on the RKE transmitter twice within five sec• Vehicle theft alarm not active onds. The vehicle doors will lock, the parking lights will flash and horn will chirp twice (if • Ignition in Off position (Keyless Enter-N-Go) programmed).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two consecutive times with the RKE transmitter. However, the ignition must be cycled by pushing the START/STOP button twice (or the ignition switch must be cycled to the ON/RUN position) before you can repeat the start sequence for a third cycle.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Keyless Enter-N-Go DOOR LOCKS feature, the message “Push Button/Insert Key” will Manual Door Locks display in the EVIC until you push the START button. To lock each door, push the door lock knob on each door trim panel downward. To unlock each door, pull the door Cancel Remote Start Remote Starting will also cancel if any of the following lock knob on each door trim panel upward.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 If the door lock knob is down when you shut the door, Power Door Locks the door will lock. Therefore, make sure the Key Fob is The power door lock switch is located on each door trim panel. Use this switch to lock or unlock the doors. not inside the vehicle before closing the door. 2 WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The doors can also be locked and unlocked with the 3. All doors are closed Keyless Enter-N-Go (Passive Entry) system. For further 4. The throttle is pressed information, refer to “Keyless Enter-N-Go” in “Things To 5. The vehicle speed is above 15 mph (24 km/h) Know Before Starting Your Vehicle”. If you press the power door lock switch while the Key Fob is in the ignition, and either door is open, the power locks will not operate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 • For vehicles not equipped with the EVIC, perform the NOTE: • If you do not hear the chime it means that the system following procedure: did not enter the programming mode and you will 1. Close all doors and place the key in the ignition need to repeat the procedure. switch. • Use the Automatic Door Locks feature in accordance 2. Within 15 seconds, cycle the ignition switch between with local laws.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. The vehicle speed is 0 mph (0 km/h) Automatic Unlock Doors On Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerProgrammable Features)” in “Understanding Your Instrument Panel” for further information. 4. Within 30 seconds, press the power door UNLOCK switch to unlock the doors. 5.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • Passive Entry may be programmed ON/OFF; refer to “Electronic Vehicle Information Center (EVIC)/ Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. To Unlock From The Driver’s Side: With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the driver’s door handle, grab the front driver door handle to unlock the driver’s door automatically.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If “Unlock All Doors 1st Press” is programmed all doors will unlock when you grab hold of the front driver’s door handle. To select between “Unlock Driver Door 1st Press” and “Unlock All Doors 1st Press”, refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter The Trunk With a valid Passive Entry RKE transmitter within 3 ft (1.0 m) of the deck lid, press the button on the located on the center of the light bar which is located on the deck lid above the license plate.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Vehicle’s Doors NOTE: With one of the vehicle’s Passive Entry RKE transmitters • After pressing the door handle LOCK button, you must wait two seconds before you can lock or unlock within 5 ft (1.5 m) of the driver or passenger front door the doors, using either Passive Entry door handle. This handles, press the door handle LOCK button to lock both is done to allow you to check if the vehicle is locked by doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 There is a single window control on the passenger’s door trim panel that operates the window on the passenger’s Power Windows door. The window controls will operate only when the The window controls on the driver’s door control both of ignition switch is in the ON/RUN or ACC position. the door windows. NOTE: • The door window will lower slightly if it is closed completely when opening the door.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE AUTO-Down Feature The driver’s door power window switch and passenger door power window switch have an AUTO-down feature. Press the window switch to the second detent, release, and the window will go down automatically. To open the window part way, press the window switch to the first detent and release it when you want the window to stop. To stop the window from going all the way down during the AUTO-down operation, pull up on the switch briefly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 NOTE: The transmission must be in PARK before the With the ignition switch in the OFF position or the key button will operate. If equipped with a manual transmis- removed from the ignition switch, the Trunk Open symsion, the vehicle speed must be under 5 mph (8 km/h) bol will display until the trunk is closed. before the button will operate.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Emergency Release OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for the driver and all passengers • Advanced Front Air Bags for driver and front passenger • Supplemental Side Air Bag Inflatable Curtains (SABIC) for the driver and passengers seated next to a window Emergency Release • Supplemental Seat-Mounted Side Air Bags (SAB) for the driver and front o
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 • Front seat belts incorporate pretensioners that may NOTE: The Advanced Front Air Bags have a multistage enhance occupant protection by managing occupant inflator design. This allows the air bag to have different rates of inflation based on the severity and type of energy during an impact event collision.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE secured in the rear seat in child restraints or beltpositioning booster seats. Older children who do not use child restraints or belt-positioning booster seats should ride properly buckled up in the rear seat. Never allow children to slide the shoulder belt behind them or under their arm. 4. Do not lean against the door or window.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air Bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Supplemental Side Air Bag Inflatable Curtain (SABIC) and Seat-Mounted Side Air Bags (SAB) also need room to inflate. Do not lean against the door or window.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE normal conditions. However, in an accident, the belt will lock and reduce your risk of striking the inside of the vehicle or being thrown out. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In an accident, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the front seat. 2 2. The seat belt latch plate is contacting the seat when the belt is routed through the seat web guide. When the belt is routed outside of the seat web guide, the latch plate will contact the quarter trim panel. Grasp the latch plate and pull out the belt.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in an accident, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs are not as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during an accident.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Position the shoulder belt on your chest so that it is 6. To release the belt, push the red button on the buckle. comfortable and not resting on your neck. The retractor The belt will automatically retract to its stowed position. will withdraw any slack in the belt. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in an accident and leave you with no protection.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 additional information, refer to “Installing Child ReLap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ straints Using The Vehicle Seat Belt” under the “Child Restraints” section. The chart below defines the type of shoulder belt. feature for each seating position. 1. Position the latch plate as close as possible to the Driver Center Passenger anchor point. First Row N/A N/A ALR 2.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE out only the amount of webbing necessary to comfort- 3. Allow the belt to retract. As the belt retracts, you will ably wrap around the occupant’s mid-section. Slide the hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode. latch plate into the buckle until you hear a ⬙click.⬙ Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically prelocked.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Energy Management Feature This vehicle has a safety belt system with an Energy Management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on accident. This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner. This feature is designed to help reduce the belt force acting on the occupant’s chest.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System (BeltAlert姞) BeltAlert威 is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert威) to fasten their seat belts. This feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and remain on until both front seat belts are fastened.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 2. Turn the ignition switch to the ON/RUN position, but The BeltAlert威 can be reactivated by repeating this prodo not start the engine. Wait for the Seat Belt Reminder cedure. Light to turn off and then proceed to the next step.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE extender. This extender should be used only if the instrument panel, above the glove compartment. The existing belt is not long enough. When it is not required, words SRS AIRBAG are embossed on the air bag covers. remove the extender and store it. WARNING! Using a seat belt extender when not needed can increase the risk of injury in an accident.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 The Advanced Front Air Bags have a multistage inflator This vehicle is equipped with Supplemental Side Air Bag design. This allows the air bag to have different rates of Inflatable Curtains (SABIC) to protect the driver, front, and rear passengers sitting next to a window. The SABIC inflation based on the severity and type of collision.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Instrument Panel • Knee Impact Bolster • Driver Advanced Front Air Bag • Passenger Advanced Front Air Bag • Supplemental Seat-Mounted Side Air Bags (SAB) • Supplemental Side Air Bag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat Track Position Sensors Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional. The protective covers for the air bag cushions are designed to open only when the air bags are inflating. • Do not drill, cut or tamper with the knee bolster in any way.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only. Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system includes side impact sensors that are calibrated to deploy the side air bags during impacts that require air bag occupant protection. WARNING! • If your vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front Air Bags work with the knee bolsters to provide improved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection. Air Bag Deployment Sensors And Controls Advanced Front Air Bags are designed to provide additional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Also, the ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Air Bag Warning Light will turn off.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating SAB exits through the seat seam into the space between the occupant and the door. The SAB fully inflate in about 10 milliseconds.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System In the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether to have the Enhanced Accident Response System perform the following functions: • • • • NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 bag inflation. These airborne particles may irritate the Maintaining Your Air Bag System skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation • Modifications to any part of the air bag system continues, see your doctor. If these particles settle on could cause it to fail when you need it.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat including your trim cover and cushion needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. WARNING! In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints • Safety experts recommend that children ride rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing: infant carriers and convertible child seats. • The infant carrier is only used rearward-facing in the vehicle. It is recommended for children who weigh up to about 20 lbs (9 kg).
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The belt-positioning booster seat is for children weighing • Check belt fit periodically. A child’s squirming or more than 40 lbs (18 kg), but who are still too small to fit slouching can move the belt out of position. the vehicle’s seat belts properly. If the child cannot sit • If the shoulder belt contacts the face or neck, move the with knees bent over the vehicle’s seat cushion while the child closer to the center of the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors and Tether for CHildren (LATCH) Your vehicle’s rear seat is equipped with the child restraint anchorage system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure. LATCH-compatible child restraint systems are now available.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 The rear seat lower anchorages are round bars located at the rear of the seat cushion where it meets the seatback and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE hook for attachment to the tether strap anchorage and a NOTE: • Ensure that the tether strap does not slip into the means of adjusting the tension of the strap. opening between the seatbacks as you remove slack in You will first loosen the child seat adjusters on the lower the strap. straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. Installing Child Restraints Using The Vehicle Seat Belt The seat belts in the passenger seating positions are equipped with either an Automatic Locking Retractor (ALR) or a cinching latch plate or both.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To attach a child restraint tether strap: 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. 1. Rotate the cover over the anchor directly behind the seat where you are placing the child restraint. 3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove slack in the tether strap according to the child restraint manufacturer’s instructions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 The engine oil, transmission fluid, and axle lubricant installed at the factory is high-quality and energyconserving. Oil, fluid, and lubricant changes should be consistent with anticipated climate and conditions under which vehicle operations will occur. For the recomPets should be restrained in the rear seat in pet harnesses mended viscosity and quality grades, refer to “Maintenance Procedures” in “Maintaining Your Vehicle”.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS Exhaust Gas Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 If you are required to drive with the trunk/liftgate open, Safety Checks You Should Make Inside The make sure that all windows are closed and the climate Vehicle control BLOWER switch is set at high speed. DO NOT Seat Belts use the recirculation mode. Inspect the belt system periodically, checking for cuts, The best protection against carbon monoxide entry into frays, and loose parts.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly installed, if not equipped from the factory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 䡵 Uconnect™ Phone — If Equipped . . . . . . . . . . . 93 ▫ Automatic Dimming Mirror . . . . . . . . . . . . . . 89 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 95 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . 90 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . 102 ▫ Outside Mirrors Folding Feature . . . . . . . . . .
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Voice Command — If Equipped . . . . . . . . . . . 123 䡵 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 ▫ Voice Command System Operation . . . . . . . . 123 ▫ Headlights And Parking Lights . . . . . . . . . . 139 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 124 ▫ Automatic Headlights . . . . . . . . . . . . . . . . . 139 ▫ Voice Training . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 ▫ Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . 143 ▫ To Deactivate . . . . . . . . . . . . . . . . . . . . . . . 149 ▫ Map/Reading Lights . . . . . . . . . . . . . . . . . . 143 ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . 150 ▫ Interior Lights . . . . . . . . . . . . . . . . . . . . . . 144 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . 150 䡵 Windshield Wipers And Washers . . . . . . . . . .
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . 161 ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . 157 ▫ Sunroof Maintenance . . . . . . . . . . . . . . . . . 161 ▫ General Information . . . . . . . . . . . . . . . . . . 157 ▫ Ignition Off Operation . . . . . . . . . . . . . . . . . 161 䡵 Power Sunroof — If Equipped . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror. NOTE: The passenger side convex outside mirror will give a much wider view to the rear, and especially of the lane next to your vehicle. Outside Mirrors Folding Feature The mirrors are equipped with a rotational hinge.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror, right mirror or off position. 91 After selecting a mirror, move the knob in the same direction you want the mirror to move. Use the center off position to guard against accidentally moving a mirror position. Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirrors An illuminated vanity mirror is located on the sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward. The light turns on automatically. Close the mirror cover to turn off the light.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect™ Phone. NOTE: The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth威 “Hands-Free Profile”, Version 0.96 or higher. See the Uconnect™ website for supported phones. For Uconnect™ customer support, visit the following websites: • www.chrysler.com/uconnect Slide-On-Rod Extender • www.dodge.
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect™ Phone is driven through your Bluetooth威 “Hands-Free Profile” mobile phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Voice Command Button Actual button location may vary with the radio. The individual buttons are described in the “Operation” section. Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice command “Phonebook New Entry”, or you can break the compound form command into two voice commands: “Phonebook” and “New Entry”. Please remember, the Uconnect™ Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. Voice Command Tree Refer to “Voice Tree” in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, after the beep, say “Pair a Device” and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. 97 phone to use if multiple mobile phones are in the vehicle at the same time.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios. may appear in the display of certain radios. Call By Saying A Name Add Names To Your Uconnect™ Phonebook • Press the NOTE: Adding names to the Uconnect™ Phonebook is recommended when the vehicle is not in motion. button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • When prompted, enter the number designation (e.g., “Home”, “Work”, “Mobile”, or “Other”). This will allow you to store multiple numbers for each phonebook entry, if desired. Phonebook Download – Automatic Phonebook Transfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect™ Phone automatically downloads names (text names) and number entries from your mobile phone’s • When prompted, recite the phone number for the phonebook.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Edit Uconnect™ Phonebook Entries loaded, there may be a short delay before the latest NOTE: downloaded names can be used. Until then, if avail• Editing names in the phonebook is recommended able, the previously downloaded phonebook is availwhen the vehicle is not in motion. able for use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 After you are finished editing an entry in the phonebook, • After you enter the Phonebook Delete menu, you will you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete. You can either say the name of a phonebook to the main menu.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete/Erase “All” Uconnect™ Phonebook Entries • Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook Erase All”. • After the “Ready” prompt and the following beep, say “Phonebook List Names”. • The Uconnect™ Phone will play the names of all the phonebook entries, including the downloaded phonebook entries, if available.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Uconnect™ Phone. Check with your mobile service provider for the features that you have.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place/Retrieve A Call From Hold To put a call on hold, press the button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the button until you hear a single beep. Three-Way Calling To initiate three-way calling, press the button while a call is in progress, and make a second phone call, as described under “Making a Second Call While Current Call is in Progress”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • After the “Ready” prompt and the following beep, say • After the ignition key is switched to OFF, a call can “Redial”. continue on the Uconnect™ Phone for a certain duration, after which the call is automatically transferred • The Uconnect™ Phone will call the last number that from the Uconnect™ Phone to the mobile phone. was dialed from your mobile phone.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting one of the languages, all prompts and • After the “Ready” prompt and the following beep, say voice commands will be in that language. “Emergency” and the Uconnect™ Phone will instruct the paired mobile phone to call the emergency numNOTE: After every Uconnect™ Phone language change ber. This feature is supported in the U.S., Canada, and operation, only the language-specific 32-name phoneMexico. book is usable.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To use your Uconnect™ Phone System in an emergency, your mobile phone must be: • turned on, • paired to the Uconnect™ System, • and have network coverage. 107 Mexico City in Mexico). Please refer to the 24-Hour “Towing Assistance” coverage details on the DVD in the Warranty Information Booklet and the 24-Hour Towing Assistance references. • If supported, this number may be programmable on some systems.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE is also to be used for navigating through an automated Working With Automated Systems This method is used in instances where one generally has customer service center menu structure, and to leave a to press numbers on the mobile phone keypad while number on a pager. navigating through an automated telephone system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Barge In — Overriding Prompts The “Voice Command” button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “Would you like to pair a phone, clear a...,” you button and say, “Pair a Phone” to could press the select that option without having to listen to the rest of the voice prompt.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect™ Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. Once your call is answered, you will hear the audio.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE List Paired Mobile Phone Names • Press the button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing”. • When prompted, say “List Phones”. 111 • After the “Ready” prompt and the following beep, say “Setup Select Phone” and follow the prompts. • You can also press the button at any time while the list is being played, and then choose the phone that you wish to select. • The selected phone will be used for the next phone call.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You can also press the button at any time while • Press the button and say the “Voice Training, the list is being played, and then choose the phone you System Training, or Start Voice Training” command. wish to delete. You can either press the Uconnect™ Phone button to Things You Should Know About Your Uconnect™ restore the factory setting or repeat the words and Phone phrases when prompted by the Uconnect™ Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will prompt you before resetting to factory settings. Voice Command • For best performance, adjust the rearview mirror to provide at least 1⁄2 in (1 cm) gap between the overhead console (if equipped) and the mirror. • Always wait for the beep before speaking.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Phonebook (Downloaded and Uconnect™ Phone Local) name recognition rate is optimized when the entries are not similar. • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • You can say “O” (letter “O”) for “0” (zero). • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 After reading a message, you can “Reply” or “Forward” Recent Calls If your phone supports “Automatic Phonebook Down- the message using Uconnect™ Phone. load”, Uconnect™ Phone can list your Outgoing, IncomSend Messages: ing and Missed Calls. You can send messages using Uconnect™ Phone. To send a new message: SMS Uconnect™ Phone can read or send new messages on • Press the button. your phone.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List of Preset Messages: 11. See You in 15 minutes 1. Yes 12. I am on my way 2. No 13. I’ll be late 3. Where are you? 14. Are you there yet? 4. I need more direction. 15. Where are we meeting? 5. L O L 16. Can this wait? 6. Why 17. Bye for now 7. I love you 18. When can we meet 8. Call me 19. Send number to call 9. Call me later 20. Start without me 10.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming messages. • Press the button. 117 Bluetooth威 Communication Link Mobile phones have been found to lose connection to the Uconnect™ Phone. When this happens, the connection can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in Bluetooth威 ON mode.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 3
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) 121 Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 3
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no other pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winbutton, listen dows are closed, and the heater/air conditioning fan is options, press the Voice Command set to low. for the beep, and say your command. button while the Pressing the Voice Command system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 2. Say a command (e.g., “Help”). Radio AM To switch to the AM band, say “AM” or “Radio AM”. In 3. Use the ON/OFF VOLUME rotary knob to adjust the this mode, you may say the following commands: volume to a comfortable level while the Voice Command system is speaking. Please note the volume setting for • “Frequency #” (to change the frequency) Voice Command is different than the audio system.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Disc To switch to the disc mode, say “Disc”. In this mode, you may say the following commands: Satellite Radio • “Track” (#) (to change the track) To switch to satellite radio mode, say “Sat” or “Satellite Radio”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE − “Continue” (to continue recording) • “Switch to system setup” − “Delete” (to delete the recording) • “Change to setup” 127 • “Play Memos” (to play previously recorded memos) • “Main menu setup” or — During the playback you may press the Voice • “Switch to setup” button to stop playing memos.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Tilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Push the switch rearward to decrease the lumbar support. Pushing upward or downward on the switch will raise and lower the position of the support. Power Lumbar Switch WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Heated Seats The front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks. The heaters provide the same average heat level for both the cushion and the seatback.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. • Do not place anything on the seat that insulates against heat, such as a blanket or cushion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Passenger Seat Easy Entry On the passenger seat, pull forward on the lever located on the side of the seatback in order to dump the seatback and slide the seat forward.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision. Active Head Restraints — Front Seats The front driver and passenger seats are equipped with Active Head Restraints (AHR).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer. 135 To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat The rear seatbacks can be folded forward to provide an additional storage area. Pull on the loops located on the upper part of the rear seatback to fold down either or both seatbacks. These loops can be tucked away when not in use. Folded Rear Seat When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 in (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. Headlights And Parking Lights Turn it to the second detent for headlight, parking light The headlight switch is located on the left side of the and instrument panel light operation. instrument panel.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights On With Wipers (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature. To activate the delay feature, place the ignition in the OFF position while the headlights are still on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Daytime Running Lights — If Equipped Fog Lights The high beam headlights will come on as Daytime The front fog light switch is built into the headRunning Lights whenever the ignition is placed in the light switch. To activate the front fog lights, turn RUN position, the headlights are off and the parking on the parking lights or the low beam headlights brake is released. The headlight switch must be used for and press the headlight switch.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Multifunction Lever The multifunction lever controls the operation of the turn signals, headlight beam selection, and passing lights. The multifunction lever is located on the left side of the steering column. Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 transmitter is pressed, or when the dimmer control is High/Low Beam Switch Push the multifunction lever away from you to switch turned fully upward, past the second detent. the headlights to high beam. Pull the multifunction lever toward you to switch the headlights back to low beam. Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dome Light Position Rotate the dimmer control completely upward to the second detent to turn on the interior lights. The interior To protect the battery, the interior lights will turn off lights will remain on when the dimmer control is in this automatically 10 minutes after the ignition is placed in position. the OFF position. This will occur if the interior lights were switched on manually or are on because a door is Interior Light Defeat (OFF) open.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The multifunction lever operates the windshield wipers and washer when the ignition is placed in the ON/RUN or ACC position. The multifunction lever is located on the left side of the steering column. 145 Rotate the end of the multifunction lever to the first detent past the intermittent settings for low-speed wiper operation, or to the second detent past the intermittent settings for high-speed wiper operation.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE to a maximum of approximately 18 seconds between If you activate the washer while the windshield wiper cycles. The delay intervals will double in duration when control is in the delay range, the wipers will operate for three wipe cycles after releasing the multifunction lever the vehicle speed is 10 mph (16 km/h) or less. and then resume the intermittent interval previously Mist Feature selected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 handle is located below the steering wheel at the end of Headlights On With Wipers (Available With the steering column. Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the A (AUTO) position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE wheel outward or push it inward as desired. To lock the The Electronic Speed Control buttons are located on the steering column in position, push the lever upward until right side of the steering wheel. fully engaged. WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. To Activate Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time. The Cruise Indicator Light will turn off. The system should be turned off when not in use.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE decrease until the button is released. Release the button To Resume Speed To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release. Resume can be used at any speed will be established. above 20 mph (32 km/h). Pressing the SET (-) button once will result in a 1 mph (2 km/h) decrease in set speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electronic Speed Control. WARNING! 3 Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE These lights also turn on when a door is opened, when The HomeLink威 buttons are located in the overhead the UNLOCK button on the Remote Keyless Entry (RKE) console designating the different HomeLink威 channels. transmitter is pressed, or when the dimmer control is turned fully upward, past the second detent. Sunglasses Storage At the rear of the console, a compartment is provided for the storage of a pair of sunglasses.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety standards. This includes most garage door opener models manufactured after 1982.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the handheld transmitter 1 to 3 in (3 to 8 cm) NOTE: Some gate operators and garage door openers from the HomeLink威 buttons while keeping the EVIC may require you to replace Step 3 with procedures noted display in view. in the “Gate Operator/Canadian Programming” section. For optimal training, point the battery end of the hand- 4. Press and hold the just-trained HomeLink威 button. If held transmitter away from the HomeLink威.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 This can usually be found where the hanging antenna 6. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor (it is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer. door). NOTE: You have 30 seconds in which to initiate the next step after the LEARN button has been pressed. 7.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink威 to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 2. Press and hold the desired HomeLink威 button for Troubleshooting Tips 20 seconds until the EVIC display states “CHANNEL # If you are having trouble programming HomeLink威, here are some of the most common solutions: TRAINING.” Do not release the button. 3. Without releasing the button, proceed with Program- • ming HomeLink威 Step 2 and follow all remaining steps. • Security It is advised to erase all channels before you sell or turn • in your vehicle.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. This device must accept any interference that may be POWER SUNROOF — IF EQUIPPED received including interference that may cause undesired The power sunroof switch is located between the sun visors on the overhead console. operation. NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Never leave children in a vehicle with the key in the ignition switch (or with the ignition in the Accessory or Run position, for vehicles equipped with Keyless Enter-N-Go). Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In a collision, there is a greater risk of being thrown from a vehicle with an open sunroof.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Closing Sunroof — Express Press the switch forward and release it within one-half second and the sunroof will close automatically from any position. The sunroof will close fully and stop automatically. This is called “Express Close”. During Express Close operation, any movement of the switch will stop the sunroof. Closing Sunroof — Manual Mode To close the sunroof, press and hold the switch in the forward position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 and will occur regardless of sunroof position. During with the sunroof open, adjust the sunroof opening to Express Vent operation, any movement of the switch will minimize the buffeting or open any window. stop the sunroof. Sunroof Maintenance Sunshade Operation Use only a nonabrasive cleaner and a soft cloth to clean The sunshade can be opened manually. However, the the glass panel. sunshade will open automatically as the sunroof opens.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE converted by your authorized dealer to provide power when the ignition is placed in the OFF position. NOTE: To ensure proper operation a MOPAR威 knob and element must be used. CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 The center console power outlet is powered directly from Items plugged into this power outlet may discharge the the battery (power available at all times). battery and/or prevent the engine from starting.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. • Many accessories that can be plugged in draw power from the vehicle’s battery even when not in use (i.e., cellular phones, etc.).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 CAUTION! (Continued) • Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlet as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your warranty. 3 CUPHOLDERS Front Cupholders The front cupholders are located in the center console. Front Cupholders Illuminated Front Cupholders — If Equipped The front cupholders are illuminated with LEDs.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cupholders The rear seat cupholders are located in the center armrest between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the rear occupant’s elbows.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE Console Storage The center console has a storage compartment located underneath the armrest, and also contains a 12 Volt power outlet, a molded-in coin holder (designed to hold various size coins). The center console may also be equipped with a Universal Consumer Interface (UCI). UCI supports Mini, 4G, Photo, Nano, 5G iPod威 and iPhone威 devices.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not operate this vehicle with a console compartment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distraction, resulting in death or injury. REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located on the climate control (Mode) knob.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 172 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 173 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 174 䡵 Electronic Vehicle Information Center (EVIC) . . 184 ▫ Electronic Vehicle Information Center (EVIC) Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 ▫ Engine Oil Change Indicator System . . . . . . . 188 ▫ Trip Functions . . . . . . . . . . . . . . . . . . .
170 UNDERSTANDING YOUR INSTRUMENT PANEL 䡵 Media Center 730N/430/430N (RHR/RER/ RBZ/RHB) CD/DVD/HDD/NAV — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 201 ▫ Operating Instructions (Voice Command System) — If Equipped . . . . . . . . . . . . . . . . 201 ▫ Operating Instructions (Uconnect™ Phone) — If Equipped . . . . . . . 201 䡵 Media Center 130 (Sales Code RES) . . . . . . . . . 202 ▫ Operating Instructions — Radio Mode . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Controlling The iPod威 Or External USB Device Using Radio Buttons . . . . . . . . . . . . . 228 ▫ Play Mode . . . . . . . . . . . . . . . . . . . . . . . . . 228 ▫ List Or Browse Mode . . . . . . . . . . . . . . . . . 230 ▫ Bluetooth Streaming Audio (BTSA) . . . . . . . . 232 䡵 Kicker威 High Performance Sound System With Driver-Selectable Surround (DSS) – If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 233 䡵 Steering Wheel Audio Controls — If Equipped . .
172 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 — Air Outlets — Instrument Cluster — Glove Compartment — Radio 5 6 7 8 — — — — Heated Seat Switch ESP OFF Switch Hazard Warning Switch Climate Control 9 — Ignition Switch 10 — Trunk Release Button 11 — Headlight Switch
UNDERSTANDING YOUR INSTRUMENT PANEL 173 INSTRUMENT CLUSTER 4
174 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Tachometer The red segments indicate the maximum permissible 1. Fuel Gauge engine revolutions per minute (RPM x 1000) for each gear The pointer shows the level of fuel in the fuel tank when range. Ease up on the accelerator before reaching the red the ignition switch is in the ON/RUN position. area. 2. Trip Odometer Button 6.
UNDERSTANDING YOUR INSTRUMENT PANEL 7. Electronic Throttle Control (ETC) Warning Light This light will turn on briefly as a bulb check when the ignition switch is placed in ON/ RUN. This light will also turn on while the engine is running if there is a problem with the Electronic Throttle Control (ETC) system. 175 8. Temperature Gauge The temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily.
176 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to “Maintaining Your Vehicle” and follow the warnings under the Cooling System Pressure Cap paragraph. 9. Turn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated.
UNDERSTANDING YOUR INSTRUMENT PANEL 177 miles (kilometers) at speeds greater than 30 mph 12. Electronic Stability Program (ESP) If this indicator light flashes during accelera- (48 km/h), see an authorized dealer as soon as possible. tion, ease up on the accelerator and apply as WARNING! little throttle as possible. Adapt your speed and driving to the prevailing road conditions, and If the warning light remains on, the system may not do not switch off the Electronic Stability Program (ESP).
178 UNDERSTANDING YOUR INSTRUMENT PANEL Do not operate the vehicle until the cause is corrected. 17. Shift Lever Indicator — Automatic Transmission This light does not indicate how much oil is in the engine. Only The Shift Lever Indicator is self-contained within the The engine oil level must be checked under the hood. instrument cluster. It displays the gear position of the 15. High Beam Indicator automatic transmission. This indicator will turn on when the high beam headlights are on.
UNDERSTANDING YOUR INSTRUMENT PANEL the repair technician should leave the odometer reading the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service.
180 UNDERSTANDING YOUR INSTRUMENT PANEL The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake Warning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. The light will remain on until the cause is corrected.
UNDERSTANDING YOUR INSTRUMENT PANEL 181 The light also will turn on when the parking brake is vehicle placard or tire inflation pressure label, you should applied with the ignition switch in the ON/RUN posi- determine the proper tire inflation pressure for those tires.) tion. As an added safety feature, your vehicle has been NOTE: This light shows only that the parking brake is equipped with a Tire Pressure Monitoring System applied. It does not show the degree of brake application.
182 UNDERSTANDING YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a TPMS CAUTION! malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is The TPMS has been optimized for the original combined with the low tire pressure telltale. When the equipment tires and wheels.
UNDERSTANDING YOUR INSTRUMENT PANEL If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes.
184 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to the driver, occupants or others.
UNDERSTANDING YOUR INSTRUMENT PANEL • Vehicle Information Warning Message Displays • Tire Pressure Monitor System • Personal Settings (Customer-Programmable Features) 185 The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: • Compass Display • Outside Temperature Display 4 • Trip Computer Functions • Uconnect™ phone Displays (If Equipped) • Uconnect™ gps Screens (If Equipped) • Audio Mode Display • Surround Sound Modes (if equipped with Dr
186 UNDERSTANDING YOUR INSTRUMENT PANEL SELECT Button MENU Button Press and release the MENU button to access Press and release the SELECT button for access to main menus, sub-menus or to select a perthe main menu, or to return to the main menu sonal setting in the setup menu. Press and hold from the sub-menus. the SELECT button for two seconds to reset features.
UNDERSTANDING YOUR INSTRUMENT PANEL 187 • Right Rear Turn Signal Light Out (with a single chime) • Did Not Train • Personal Settings Not Available – Vehicle Not in PARK • Low Tire Pressure (with a single chime) • Left/Right Door Ajar • Service TPM System (with a single chime) • Door(s) Ajar (with a single chime if vehicle is in • motion) • • Trunk Ajar (with a single chime) • • Oil Change Required • • Low Washer Fluid (with a single chime) • • Channel # Transmit • • Channel # Training • • Channel # Trai
188 UNDERSTANDING YOUR INSTRUMENT PANEL • 0-60 mph (0-100 km/h) • Braking Distance • 1/8 Mile • 1/4 Mile • Instantaneous G-Force • Peak G-Force • Digital Speedometer Engine Oil Change Indicator System Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded, to indicate the next scheduled oil change interval.
UNDERSTANDING YOUR INSTRUMENT PANEL Vehicles Not Equipped With Keyless Enter-N-Go 189 • Distance To Empty 1. Turn the ignition switch to the ON/RUN position (Do • Trip A not start the engine.) • Trip B 2. Fully depress the accelerator pedal, slowly, three times • Elapsed Time within 10 seconds. • Display Units of Measure in 3. Turn the ignition switch to the OFF/LOCK position.
190 UNDERSTANDING YOUR INSTRUMENT PANEL Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the SELECT button. Trip B Shows the total distance traveled for Trip B since the last reset.
UNDERSTANDING YOUR INSTRUMENT PANEL 191 a second time within three seconds of resetting the The Performance Features include the following: currently-displayed function (>Reset ALL will display • 0-60 mph (0-100 km/h) during this three-second window). • Braking Distance Performance Features • 1/8 Mile WARNING! Measurement of vehicle statistics with the Performance Features is intended for off-highway or offroad use only and should not be done on any public roadways.
192 UNDERSTANDING YOUR INSTRUMENT PANEL The following describes each feature and its operation: • To clear the vehicle’s best 0-60 mph (0-100 km/h) time, press and hold the SELECT button for five seconds. 0-60 mph (0-100 km/h) When selected, this screen displays the time it takes for Braking Distance the vehicle to go from 0 to 60 mph (0 to 100 km/h) within When selected, this screen displays the vehicle’s braking 10 seconds. distance and the speed at which the brake pedal was depressed.
UNDERSTANDING YOUR INSTRUMENT PANEL 193 • The distance and speed measurements will continue to • Pressing the SELECT button will clear the current run display until the SELECT button is pressed. and display the vehicle’s best 1/8 mile (1/4 mile) run. • Pressing the SELECT button will clear the current run • To clear the vehicle’s best 1/8 mile (1/4 mile) run, and prepare the cluster to record a new run. press and hold the SELECT button for five seconds.
194 UNDERSTANDING YOUR INSTRUMENT PANEL Digital Speedometer When selected, this screen displays vehicle speed and records top speed. • Press and hold the SELECT button for three seconds to toggle between current speed and top speed. • To reset top speed, quickly press and release the SELECT button when top speed is displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 195 Refer to “Keyless Enter-N-Go” in “Starting And Operat- While in the Surround Sound menu, press the SELECT button to change surround modes. The Video Surround ing” for more information. Mode will only be available for video media sources NOTE: Under certain conditions, the display may be (DVDs, Video CDs, or other video media supported by superseded by another display of higher priority. But the radio).
196 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will display “CAL” until the compass is calibrated. You may also calibrate the compass by completing one or more 360 degree turns (in an area free from large metal or metallic objects) until the “CAL” message displayed in the EVIC turns off. The compass will now function normally.
UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Mobile Phones, Laptops and Radar Detectors. This is where the compass module is located, and it can cause interference with the compass sensor, and it may give false readings. 197 2. Press and release the MENU button until Personal Settings displays in the EVIC. 3. Press the UP or DOWN button until “COMPASS VARIANCE” message and the last variance zone number displays in the EVIC.
198 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Pressure Shows the actual oil pressure. SELECT button while in this display to select English, Espanol, or Francais. Then, as you continue, the information will display in the selected language. • Tire Pressure Shows the actual tire pressure for each tire (EXCLUDING NOTE: The EVIC will not change the Uconnect™ language selection. Refer to “Uconnect™ phone” in “UnderTHE SPARE TIRE).
UNDERSTANDING YOUR INSTRUMENT PANEL Remote Key Unlock When Driver Door 1st Press is selected, only the driver’s door will unlock on the first press of the Remote Keyless Entry (RKE) transmitter UNLOCK button. When Driver Door 1st Press is selected, you must press the RKE transmitter UNLOCK button twice to unlock the passenger door. When All Doors 1st Press is selected, both of the doors will unlock on the first press of the RKE transmitter UNLOCK button.
200 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Turning the headlights on during the daytime causes the instrument panel lights to dim. To increase the brightness, refer to “Lights” in “Understanding The Features Of Your Vehicle.” Delay Turning Headlights Off When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. To make your selection, press and release the SELECT button until “0,” “30,” “60,” or “90” appears.
UNDERSTANDING YOUR INSTRUMENT PANEL Turn-by-Turn Navigation — If Equipped When ON is selected, the Turn-by-Turn directions will appear in the display as the vehicle approaches a designated turn within a programmed route. To make your selection, press and release the SELECT button until “ON” or “OFF” appears. Keyless Enter-N-Go (Passive Entry) This feature allows you to lock and unlock the vehicle’s door(s) without having to press the RKE transmitter lock or unlock buttons.
202 UNDERSTANDING YOUR INSTRUMENT PANEL MEDIA CENTER 130 (SALES CODE RES) Operating Instructions — Radio Mode NOTE: The radio sales code is located on the lower right NOTE: The ignition switch must be in the ON or ACC side of the radio faceplate. position to operate the radio. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. 203 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5.
204 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second AM/FM Button time and MID will display. Turn the TUNE/SCROLL Press the buttons to select either AM or FM mode. control knob to the right or left to increase or decrease the SET/RND Button — To Set the Pushbutton mid-range tones. Memory Push the rotary TUNE/SCROLL control knob a third When you are receiving a station that you wish to time and TREBLE will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 and 12 FM stations to be stored into pushbutton memory. • This radio is capable of playing compact discs (CD), The stations stored in SET 2 memory can be selected by recordable compact discs (CD-R), rewritable compact pressing the pushbutton twice. discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Every time a preset button is used, a corresponding Inserting Compact Disc(s) button number will display.
206 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • The RES Media Center is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 RW/FF Press and hold the FF (Fast Forward) button and the CD player will begin to fast forward until FF is released, or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner. Notes on Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restrictions. AM/FM Button Press the button to select either AM or FM mode.
208 UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of • Maximum number of folders. (The radio display of file multisession for CD audio or MP3 playback may result in names and folder names is limited. For large numbers longer disc loading times. of files and/or folders, the radio may be unable to display the file name and folder name, and will assign Supported MP3 File Formats a number instead.
UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 209 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
210 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection. Holding either button will bypass position to operate the radio. stations without stopping until you release it.
212 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Adjust the minutes using the right side TUNE/ Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature SCROLL control knob. Press the TUNE/SCROLL control (if equipped). Refer to “Uconnect™ Phone” in “Under- knob to save time change. standing The Features If Your Vehicle”. 5. To exit, press any button/knob or wait five seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. 213 Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display.
214 UNDERSTANDING YOUR INSTRUMENT PANEL or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 By pressing the SEEK button when the Music Type icon is AM/FM Button displayed, the radio will be tuned to the next frequency Press the button to select either AM or FM mode. station with the same selected Music Type name. The SET/RND Button — To Set the Pushbutton Music Type function only operates when in the FM mode.
216 UNDERSTANDING YOUR INSTRUMENT PANEL and 12 FM stations to be stored into pushbutton memory. • This radio is capable of playing compact discs (CD), The stations stored in SET 2 memory can be selected by recordable compact discs (CD-R), rewritable compact pressing the pushbutton twice. discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Every time a preset button is used, a corresponding Inserting Compact Disc(s) button number will display.
UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • The RES Media Center is a single CD player. Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player.
218 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner. Notes On Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restrictions. AM/FM Button Press the button to select either AM or FM mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of • Maximum number of folders. (The radio display of file multisession for CD audio or MP3 playback may result in names and folder names is limited. For large numbers longer disc loading times. of files and/or folders, the radio may be unable to display the file name and folder name and will assign Supported MP3 File Formats a number instead.
220 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
222 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when the ignition is OFF). radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at www.siriuscanada.
UNDERSTANDING YOUR INSTRUMENT PANEL using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. 223 Reception Quality Satellite reception may be interrupted due to one of the following reasons: • The vehicle is parked in an underground parking structure or under a physical obstacle.
224 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it.
UNDERSTANDING YOUR INSTRUMENT PANEL 225 Toggle the MUSIC TYPE button again to select the music SET Button – To Set the Pushbutton Memory When you are receiving a channel that you wish to type. commit to pushbutton memory, press the SET button. By pressing the SEEK button when the Music Type The symbol SET 1 will now show in the display window. function is active, the radio will be tuned to the next Select the button (1-6) you wish to lock onto this channel channel with the same selected Music Type name.
226 UNDERSTANDING YOUR INSTRUMENT PANEL This feature allows an iPod威 or external USB device to be Buttons 1 - 6 These buttons tune the radio to the channels that you plugged into the USB port, located in the center console or glove compartment. commit to pushbutton memory (12 Satellite stations). iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威 Operating Instructions - Uconnect™ Phone and iPhone威 devices.
UNDERSTANDING YOUR INSTRUMENT PANEL Connecting The iPod姞 Or External USB Device Use the connection cable to connect an iPod威 or external USB device to the vehicle’s USB/AUX connector port which is located in the center console or glove compartment.
228 UNDERSTANDING YOUR INSTRUMENT PANEL • The audio device can be controlled using the radio mode. In Play mode, the following buttons on the radio buttons to Play, Browse, and List the iPod威 contents. faceplate may be used to control the iPod威 or external USB device and display data: • The audio device battery charges when plugged into the USB/AUX connector (if supported by the specific • Use the TUNE control knob to select the next or audio device) previous track.
UNDERSTANDING YOUR INSTRUMENT PANEL 229 • A single press backward << RW or forward FF >> will • Press the SCAN button to use iPod威/USB/MP3 dejump backward or forward respectively, for five vice scan mode, which will play the first 10 seconds of seconds. each track in the current list and then forward to the next song. To stop SCAN mode and start playing the • Use the << SEEK and SEEK >> buttons to jump to the desired track, when it is playing the track, press the previous or next track.
230 UNDERSTANDING YOUR INSTRUMENT PANEL List Or Browse Mode During Play mode, pressing any of the buttons described below, will bring up List mode. List mode enables scrolling through the list of menus and tracks on the audio device. • TUNE control knob: The TUNE control knob functions in a similar manner as the scroll wheel on the audio device or external USB device.
UNDERSTANDING YOUR INSTRUMENT PANEL • Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • To exit List mode without selecting a track, press the same PRESET button again to go back to Play mode. • LIST button: The LIST button will display the top level menu of the iPod威 or external USB device. Turn the TUNE control knob to list the top-menu item to be selected and press the TUNE control knob.
232 UNDERSTANDING YOUR INSTRUMENT PANEL 2. After the ⬙Ready⬙ prompt and the following beep, say Bluetooth Streaming Audio (BTSA) Music can be streamed from your cellular phone to the ⬙Setup⬙, then ⬙Select Audio Devices⬙. Uconnect™ phone system. 3. Say the name of the audio device or ask the Uconnect™ phone system to list audio devices.
UNDERSTANDING YOUR INSTRUMENT PANEL KICKER姞 HIGH PERFORMANCE SOUND SYSTEM WITH DRIVER-SELECTABLE SURROUND (DSS) – IF EQUIPPED 233 sound from any stereo audio source. A new feature of the KICKER威 audio system offers the ability to choose surround sound for any audio source. “Audio Surround” is optimized for front seat passengers for any audio source.
234 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Depending on the audio source, the output may sound better in stereo or DDS surround mode. When in “Audio Surround” mode, balance is set automatically. Fader control is available in surround mode but should be set to the center position for optimal surround performance. STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches.
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Pressing the center button will make the radio switch CD Player between the various modes available (AM/FM/SAT/ Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once CD/HDD/AUX/VES, etc.). will go to the beginning of the current track, or to the The left-hand control is a rocker-type switch with a beginning of the previous track if it is within one second pushbutton in the center.
236 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particuCD/DVD DISC MAINTENANCE To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known 1. Handle the disc by its edge; avoid touching the good disc before considering disc player service. surface. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL CLIMATE CONTROLS 237 Automatic Operation Operation of the system is quite simple. Automatic Temperature Control (ATC) The Automatic Temperature Control system automati- 1. Turn the Mode Control knob (on the right) and the cally maintains the climate in the cabin of the vehicle at Blower Control knob (on the left) to AUTO. the comfort levels desired by the driver and passenger. NOTE: The AUTO position performs best for front seat occupants only. 2.
238 UNDERSTANDING YOUR INSTRUMENT PANEL The recommended setting for maximum comfort for the Blower Control For full automatic operation or for average person is 72°F (22°C); however, this may vary. automatic blower operation, turn the NOTE: knob to the AUTO position. In manual • The temperature setting can be adjusted at anytime mode there are seven blower speeds without affecting automatic operation. that can be individual selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 239
240 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can override the AUTO mode setting to • Floor change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets. • Panel Air is directed through the outlets in the instrument • Mix Air is directed through the floor, defrost, and side panel. These outlets can be adjusted to direct airflow.
UNDERSTANDING YOUR INSTRUMENT PANEL 241 NOTE: • Air Conditioner Control Press this button to turn on the air • When the ignition switch is turned to the LOCK position, the recirculation feature will be cancelled. conditioning during manual operation only. When the air conditioning is • In cold weather, use of the Recirculation mode may turned on, cool dehumidified air will lead to excessive window fogging.
242 UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However, under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation Mode at this time.
UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Interior fogging on the windshield can be quickly removed by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather. NOTE: Recirculate without A/C should not be used for long periods as fogging may occur.
244 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 249 䡵 Engine Block Heater — If Equipped . . . . . . . . 256 ▫ Manual Transmission – If Equipped . . . . . . . 249 䡵 Manual Transmission — If Equipped . . . . . . . . 257 ▫ Automatic Transmission – If Equipped . . . . . 250 ▫ Six-Speed Manual Transmission . . . . . . . . . . 257 ▫ Keyless Enter-N-Go . . . . . . . . . . . . . . . . . . . 251 䡵 Automatic Transmission — If Equipped . . . . . .
246 STARTING AND OPERATING 䡵 AutoStick威 . . . . . . . . . . . . . . . . . . . . . . . . . . 268 䡵 Brake System . . . . . . . . . . . . . . . . . . . . . . . . 279 ▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . 269 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . 279 ▫ General Information . . . . . . . . . . . . . . . . . . 269 䡵 Electronic Brake Control System . . . . . . . . . . . 282 䡵 Driving On Slippery Surfaces . . . . . . . . . . . . . 270 ▫ Anti-Lock Brake System (ABS) . .
STARTING AND OPERATING 247 ▫ Tire Loading And Tire Pressure . . . . . . . . . . 296 䡵 Tire Rotation Recommendations . . . . . . . . . . . 309 䡵 Tires — General Information . . . . . . . . . . . . . 300 ▫ Tire Rotation – Four Season/Rsa Tires . . . . . 310 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . 300 ▫ Tire Rotation – F1 Three Season Tires . . . . . . 310 ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . 301 䡵 Tire Pressure Monitor System (TPMS) . . . . . . .
248 STARTING AND OPERATING ▫ Fuel System Cautions . . . . . . . . . . . . . . . . . 321 ▫ Overloading . . . . . . . . . . . . . . . . . . . . . . . . 326 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . 322 ▫ Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 322 䡵 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . 327 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . .
STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the key fob in the ignition.
250 STARTING AND OPERATING WARNING! CAUTION! Do not attempt to push or tow your vehicle to get it started. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery, booster cables may be used to obtain a start from another vehicle. This type of start can be dangerous if done improperly, so follow the procedure carefully.
STARTING AND OPERATING Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds. If this occurs, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure.
252 STARTING AND OPERATING NOTE: The ENGINE START/STOP button should only Using The ENGINE START/STOP Button – be removed or inserted with the ignition in the OFF Manual Transmission Only position. NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the Normal Starting accelerator pedal. Using The ENGINE START/STOP Button – Automatic Transmission Only To start the engine, press and hold the clutch pedal while pressing and holding the ENGINE START/STOP button.
STARTING AND OPERATING 2. The ignition switch will return to the OFF position. 3. If the shift lever is not in PARK, the ENGINE START/ STOP button must be held for two seconds and vehicle speed must be above 5 mph (8 km/h) before the engine will shut off. The ignition switch position will remain in the ACC position until the shift lever is in PARK and the button is pressed twice to the OFF position.
254 STARTING AND OPERATING • If the vehicle speed is above 5 mph (8 km/h), the • Starting with the ignition switch in the OFF position: ENGINE START/STOP button must be held for two • Press the ENGINE START/STOP button once to seconds before the engine will shut off.
STARTING AND OPERATING If Engine Fails To Start WARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way.
256 STARTING AND OPERATING the way to the floor and hold it, then press and hold the ENGINE START/STOP button for no more than 15 seconds. Release the accelerator pedal and the clutch pedal, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure. Clearing A Flooded Engine (Using Fob With Integrated Key) If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” procedures, it may be flooded.
STARTING AND OPERATING The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine. WARNING! Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution. MANUAL TRANSMISSION — IF EQUIPPED Six-Speed Manual Transmission WARNING! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied.
258 STARTING AND OPERATING NOTE: During cold weather, you may experience in- Shifting creased effort in shifting until the transmission fluid Fully press the clutch pedal and lift your foot off the accelerator pedal before shifting gears. As you release the warms up. This is normal. clutch pedal, lightly press the accelerator pedal. Damage to the transmission or clutch may occur if you do not fully press the clutch pedal and lift off of the accelerator pedal when shifting.
STARTING AND OPERATING 259 CAUTION! Earlier upshifts during cruise conditions (relatively steady speeds) may result in increased fuel economy. Always make sure the vehicle comes to a complete stop before shifting into REVERSE. Failure to do so may result in transmission damage. Higher upshift speeds may be used to obtain a desired acceleration rate. NOTE: You must always use first gear (or Reverse) when starting • Your vehicle is equipped with a transmission reverse inhibitor system.
260 STARTING AND OPERATING with the clutch engaged (clutch pedal released), but it may also be heard when driving at low engine RPM. Also, this may be more noticeable when the transmission is warm. This is a normal condition and is not an indication of a problem with your clutch or transmission. When the “1–4 Skip Shift Indicator Message” is displayed, the shift mechanism will only allow shifts from first gear to fourth gear.
STARTING AND OPERATING 261 CAUTION! CAUTION! (Continued) • If you skip more than one gear while downshifting or downshift at too high an engine speed, you could damage the engine, transmission, or clutch. • Do not downshift into first gear when the vehicle is moving faster than 15 mph (24 km/h), as you could damage the engine and/or clutch. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
262 STARTING AND OPERATING WARNING! It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.
STARTING AND OPERATING • The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating. Therefore, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and precision shifts will develop within a few shift cycles. The shift lever is automatically locked while in the PARK position.
264 STARTING AND OPERATING Over-Temperature Mode The transmission electronics constantly monitor the transmission oil temperature. If the transmission exceeds normal operating temperature, the transmission will change the way it shifts to help control the condition. This may result in a slightly different feeling or response during normal operation in DRIVE position. After the transmission cools down, it will return to normal operation.
STARTING AND OPERATING 265 When parking on a flat surface, place the shift lever in the PARK position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the shift lever in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
266 STARTING AND OPERATING The following indicators should be used to ensure that REVERSE you have engaged the shift lever in the PARK position: This range is used for moving the vehicle rearward. Always stop before moving the shift lever to REVERSE. • When shifting into PARK, move the shift lever all the way forward and to the left until it stops and is fully NEUTRAL This range is used when the vehicle is standing for seated. prolonged periods with the engine running.
STARTING AND OPERATING WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. 267 under heavy loading conditions (in hilly terrain, traveling into strong head winds, or while towing heavy trailers), use the AutoStick威 mode and select the “3” range.
268 STARTING AND OPERATING brought to a stop. After the vehicle has stopped, PARK, REVERSE, and NEUTRAL will continue to operate. Second gear will operate in the DRIVE position. The Malfunction Indicator Light (MIL) may be illuminated. NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur.
STARTING AND OPERATING 269 You can shift in or out of the AutoStick威 mode at any time without taking your foot off the accelerator pedal. When you wish to engage AutoStick威, simply move the shift lever to the right (D+) or left (D-) while in the DRIVE position. The transmission will remain in the current gear until an upshift or downshift is chosen. When you wish to disengage AutoStick威, hold the shift lever to the right for at least two seconds.
270 STARTING AND OPERATING • Starting out in second gear is helpful in snowy or icy conditions. • Avoid using speed control when AutoStick威 is engaged. • The transmission will automatically shift up when maximum engine speed is reached while AutoStick威 is engaged. WARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the rear wheels. You could lose control of the vehicle and possibly have a collision.
STARTING AND OPERATING 271 2. Slow down if the road has standing water or puddles. DRIVING THROUGH WATER Driving through water more than a few inches/ 3. Replace tires when tread wear indicators first become centimeters deep will require extra caution to ensure visible. safety and prevent damage to your vehicle. 4. Keep tires properly inflated. 5. Maintain sufficient distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop.
272 STARTING AND OPERATING Flowing/Rising Water WARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water. Furthermore, flowing and/or rising water can carry your vehicle away swiftly. Failure to follow this warning may result in injuries that are serious or fatal to you, your passengers, and others around you.
STARTING AND OPERATING 273 CAUTION! WARNING! • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water. Do not continue to operate the vehicle if any fluid appears contaminated, as this may result in further damage.
274 STARTING AND OPERATING POWER STEERING • Upon initial start-up in cold weather, the power steerThe standard power steering system will give you good ing pump may make noise for a short amount of time. vehicle response and increased ease of maneuverability This is due to the cold, thick fluid in the steering in tight spaces. The system will provide mechanical system. This noise should be considered normal, and it steering capability if power assist is lost.
STARTING AND OPERATING Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized dealer. CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components.
276 STARTING AND OPERATING When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
STARTING AND OPERATING 277 Automatic Transmission – If Equipped The foot operated parking brake is located below the lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully. To release the parking brake, press the park brake pedal a second time and let your foot up as you feel the brake disengage.
278 STARTING AND OPERATING WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. • Do not leave the key fob in the ignition switch.
STARTING AND OPERATING BRAKE SYSTEM Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability, the remaining system will still function. There will be some loss of overall braking effectiveness. This may be evident by increased pedal travel during application, greater pedal force required to slow or stop, and potential activation of the “Brake Warning Light.
280 STARTING AND OPERATING ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops.
STARTING AND OPERATING WARNING! (Continued) • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The Anti-Lock Brake System (ABS) cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning.
282 STARTING AND OPERATING If both the “Brake Warning Light” and the “ABS Warning Light” remain on, the ABS and EBD systems are not functioning. Immediate repair to the ABS system is required. Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions by controlling hydraulic brake pressure. This prevents wheel lock-up to help avoid skidding on slippery surfaces during braking.
STARTING AND OPERATING 283 Traction Control System (TCS) This system monitors the amount of wheel spin of each driven wheel. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. Brake Assist System (BAS) This system complements the ABS by optimizing the vehicle braking capability during emergency braking maneuvers.
284 STARTING AND OPERATING WARNING! The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. The capabilities of a BAS-equipped vehicle must never be exploited in a reckless or dangerous manner that could jeopardize the user’s safety or the safety of others. brake pedal.
STARTING AND OPERATING WARNING! There may be situations on minor hills (i.e., less than 8%), with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling may occur. This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking the vehicle.
286 STARTING AND OPERATING The “ESP/TCS Indicator Light” located in the instrument cluster, starts to flash as soon as the tires lose traction and the ESP system becomes active. The “ESP/TCS Indicator Light” also flashes when TCS is active. If the “ESP/TCS Indicator Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions.
STARTING AND OPERATING 287 Partial Off The “Partial Off” mode is intended for times when a more spirited driving experience is desired. It is also intended for driving in deep snow, sand, or gravel. This mode disables the TCS portion of the ESP and raises the threshold for ESP activation, which allows for more wheel spin than what ESP normally allows. The “ESP OFF” switch is located in the switch bank near the bottom center of the instrument panel.
288 STARTING AND OPERATING mode is overcome, turn the ESP ON again by momen- “Electronic Vehicle Information Center (EVIC)” in “Untarily pressing the “ESP OFF” switch. This may be done derstanding Your Instrument Panel” for further information. To turn ESP ON again, momentarily press the “ESP while the vehicle is in motion. OFF” switch. Full Off This mode is intended for off-highway or off-road use NOTE: The ⬙ESP OFF⬙ message will display and the only and should not be used on any public roadways.
STARTING AND OPERATING across an axle quite similarly to a limited slip differential. If one wheel on an axle is spinning faster than the other, the system will apply the brake of the spinning wheel and allow more engine torque to be applied to the wheel that is not spinning. To improve the vehicle’s traction when driving with tire chains, or when starting off in deep snow, sand, or gravel, it may be desirable to switch to the “Partial Off” mode by momentarily pressing the “ESP OFF” switch.
290 STARTING AND OPERATING NOTE: TIRE SAFETY INFORMATION • The “ESP/TCS Indicator Light” and the “ESP/BAS Tire Markings Malfunction Indicator Light” will turn on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESP System will be ON even if it was turned OFF previously. • The ESP Control System will make buzzing or clicking sounds when it is active.
STARTING AND OPERATING 291 NOTE: • Temporary spare tires are high-pressure compact • P (Passenger) - Metric tire sizing is based on U.S. spares designed for temporary emergency use only. design standards. P-Metric tires have the letter “P” Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designamolded into the sidewall preceding the size designation. Example: P215/65R15 95H. tion. Example: T145/80D18 103M.
292 STARTING AND OPERATING Tire Sizing Chart TIRE SIZING TERMS Size Designation: P = Passenger Car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger Car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
STARTING AND OPERATING 293 TIRE SIZING TERMS Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
294 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING 295 Tire Terminology and Definitions Term B-Pillar Cold Tire Pressure Maximum Inflation Pressure Recommended Inflation Pressure Tire Placard Definition The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.
296 STARTING AND OPERATING Tire Loading And Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires.
STARTING AND OPERATING NOTE: Under a maximum loaded vehicle condition, gross axle weight ratings (GAWRs) for the front and rear axles must not be exceeded. For further information on GAWRs, vehicle loading, and trailer towing, refer to “Vehicle Loading” in this section. 297 Steps For Determining Correct Load Limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2.
298 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if “XXX” • The following table shows examples on how to calculate total load, cargo/luggage, and towing capacities amount equals 1,400 lbs (635 kg) and there will be five of your vehicle with varying seating configurations 150 lb (68 kg) passengers in your vehicle, the amount of and number and size of occupants.
STARTING AND OPERATING 299
300 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. 301 Tire Inflation Pressures The proper cold tire inflation pressure is listed on the driver’s side “B” Pillar or rear edge of the driver’s side door.
302 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
STARTING AND OPERATING 303 Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
304 STARTING AND OPERATING These low-profile high performance tires are not designed for off-road or winter (snow or cold weather) conditions, and their noise, ride, and wear will be different than non-performance tires. WARNING! Do not use these tires when temperatures are below 40°F (4°C) or in snow/ice conditions. You could lose control and have an accident resulting in serious injury or death. WARNING! Fast spinning tires can be dangerous.
STARTING AND OPERATING 305 Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • Tire pressure • Distance driven WARNING! 1 — Worn Tire 2 — New Tire Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death.
306 STARTING AND OPERATING Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed. (Refer to the paragraph on “Tread Wear Indicators”). Refer to the “Tire and Loading Information” placard for the size designation of your tire.
STARTING AND OPERATING 307 WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
308 STARTING AND OPERATING CAUTION! CAUTION! (Continued) To avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate chain breakage. Remove the damaged parts of the chain before further use.
STARTING AND OPERATING 309 than that of non-studded tires. Some states prohibit studded SNOW TIRES Some areas of the country require the use of snow tires tires; therefore, local laws should be checked before using during the winter. All season tires can be identified by the these tire types. M+S designation on the tire sidewall.
310 STARTING AND OPERATING Tire Rotation – Four Season/RSA Tires Tire Rotation – F1 Three Season Tires The suggested rotation method for vehicles equipped The suggested rotation method is the “side-to-side” as with all season tires is the “forward-cross” as shown in shown in the following diagram. This method is required the following diagram. due to different size tires on the front and rear of the vehicle.
STARTING AND OPERATING 311 TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C).
312 STARTING AND OPERATING For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 23 psi (158 kPa). This tire pressure is sufficiently low enough to turn ON the “TPM Telltale Light.
STARTING AND OPERATING 313 NOTE: • Seasonal temperature changes will affect tire pressure, • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance or to provide warning of a tire failure the tire. or condition. Premium System • The TPMS should not be used as a tire pressure gauge The Tire Pressure Monitor System (TPMS) uses wireless while adjusting your tire pressure.
314 STARTING AND OPERATING • Various TPMS messages, which display in the Electronic Vehicle Information Center (EVIC), and • TPM Telltale Light Tire Pressure Monitoring Low Pressure Warnings The “TPM Telltale Light” will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires. In addition, the EVIC will display a “LOW TIRE” message and a graphic showing the pressure values of each tire with the low tire pressure values flashing.
STARTING AND OPERATING 315 will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information. Service TPMS Warning If a system fault is detected, the “TPM Telltale Light” will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime.
316 STARTING AND OPERATING The EVIC will also display a ⬙SERVICE TPM SYSTEM⬙ message for a minimum of five seconds when a system fault related to an incorrect sensor location fault is detected. In this case, the ⬙SERVICE TPM SYSTEM⬙ message is then followed with a graphic display with pressure values still shown. This indicates that the pressure values are still being received from the TPM sensors but they may not be located in the correct vehicle 1.
STARTING AND OPERATING 317 Telltale Light” will remain ON and a chime will sound. In “TPM Telltale Light” will turn OFF and the graphic in the addition, the graphic in the EVIC will still display a EVIC will display a new pressure value instead of dashes (- -), as long as no tire pressure is below the low-pressure flashing pressure value. warning limit in any of the four active road tires. The 3.
318 STARTING AND OPERATING The TPM sensors are regulated under one of the follow- as hard starting, stalling, and hesitations. If you experiing licenses: ence these symptoms, try another brand of gasoline before considering service for the vehicle. United States . . . . . . . . . . . . . . . . . . . MRXC4W4MA4 Over 40 auto manufacturers worldwide have issued and Canada . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING The manufacturer supports the use of reformulated gasolines. Properly blended reformulated gasolines will provide excellent performance and durability of engine and fuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxygenates such as 10% ethanol, MTBE, and ETBE. Oxygenates are required in some areas of the country during the winter months to reduce carbon monoxide emissions.
320 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with of gasoline may not be indicated on the gasoline pump, therefore, you should ask your gasoline retailer whether E-85 perform the following: the gasoline contains MMT. It is even more important to • drain the fuel tank (see your authorized dealer) look for gasoline without MMT in Canada, because MMT can be used at levels higher than those allowed in the • change the engine oil and oil filter United States.
STARTING AND OPERATING Fuel System Cautions 321 CAUTION! (Continued) CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system. • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat.
322 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
STARTING AND OPERATING 323 CAUTION! Fuel Fill Cap NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler door. • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on.
324 STARTING AND OPERATING WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. NOTE: • Tighten the gas cap until you hear a “clicking” sound.
STARTING AND OPERATING 325 VEHICLE LOADING • Gross Axle Weight Rating (GAWR) rear The load carrying capacity of your vehicle is shown on • Vehicle Identification Number (VIN) the “Vehicle Certification Label.” This information should be used for passenger and luggage loading as • Type of Vehicle indicated. • Month Day and Hour of Manufacture (MDH) Do not exceed the specified Gross Vehicle Weight Rating The bar code allows a computer scanner to read the VIN. (GVWR) or the Gross Axle Weight Rating (GAWR).
326 STARTING AND OPERATING WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have a collision. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
STARTING AND OPERATING Loading To load your vehicle properly, first figure out its empty weight, axle-by-axle and side-by-side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving. If weighing the loaded vehicle shows that you have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight.
328 STARTING AND OPERATING Towing This Vehicle Behind Another Vehicle — • There is no limitation on the distance to be traveled Manual Transmission • The towing speed must not exceed 65 mph (104 km/h) Flat towing of vehicles equipped with a manual transmission is permitted within the following limitations: CAUTION! Your vehicle may be towed under the following conditions: • The shift lever must be in NEUTRAL Exceeding these towing limits may cause severe transmission damage.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 331 ▫ Jump-Starting Procedure . . . . . . . . . . . . . . . 344 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 331 䡵 Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . 346 䡵 TIREFIT Kit . . . . . . . . . . . . . . . . . . . . . . . . . 332 䡵 Shift Lever Override . . . . . . . . . . . . . . . . . . . 347 ▫ TIREFIT Storage . . . . . . . . . . . . . . . . . . . . .
330 WHAT TO DO IN EMERGENCIES ▫ Towing This Vehicle Behind Another Vehicle (Flat Towing With All Four Wheels On The Ground) — Manual Transmissions . . . . . . . . 350 ▫ Towing This Vehicle Behind Another Vehicle With A Tow Dolly . . . . . . . . . . . . . . . . . . . .
WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS The Hazard Warning flasher switch is located in the switch bank near the bottom center of the instrument panel. 331 IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional • On the highways — slow down.
332 WHAT TO DO IN EMERGENCIES CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (116 °C) or greater pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–110°C). If the pointer remains at 240°F (116°C) or greater and you hear a chime, turn the engine off immediately and call for service.
WHAT TO DO IN EMERGENCIES TIREFIT Storage The TIREFIT kit is located in the trunk. 333 TIREFIT Kit Components And Operation 6 1. Sealant Bottle TIREFIT Location 2. Deflation Button 3. Pressure Gauge 4.
334 WHAT TO DO IN EMERGENCIES 5. Mode Select Knob 6. Sealant Hose (Clear) 7. Air Pump Hose (Black) 8. Power Plug Selecting Sealant Mode Turn the Mode Select Knob (5) to this position to inject the TIREFIT Sealant and to inflate the tire. Use the Sealant Hose (clear hose) (6) when selecting this mode. Using The Mode Select Knob And Hoses Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode.
WHAT TO DO IN EMERGENCIES TIREFIT Usage Precautions • Replace the TIREFIT Sealant Bottle (1) and Sealant Hose (6) prior to the expiration date (printed on the bottle label) to assure optimum operation of the system. Refer to “Sealing a Tire with TIREFIT” section (F) “Sealant Bottle and Hose Replacement”. • The Sealant Bottle (1) and Sealant Hose (6) are a one tire application use. After each use, always replace these components immediately at an authorized dealer.
336 WHAT TO DO IN EMERGENCIES WARNING! (Continued) WARNING! (Continued) • Do not use TIREFIT or drive the vehicle under the following circumstances: − If the puncture in the tire tread is approximately 1/4 in. (6 mm) or larger. − If the tire has any sidewall damage. − If the tire has any damage from driving with extremely low tire pressure. − If the tire has any damage from driving on a flat tire. − If the wheel has any damage. − If you are unsure of the condition of the tire or the wheel.
WHAT TO DO IN EMERGENCIES WARNING! (Continued) • TIREFIT Sealant solution contains latex. In case of an allergic reaction or rash, consult a physician immediately. Keep TIREFIT out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water. Do not induce vomiting! Consult a physician immediately. Sealing A Tire With TIREFIT (A) Whenever You Stop To Use TIREFIT: 337 injecting the sealant into the deflated tire and running the air pump.
338 WHAT TO DO IN EMERGENCIES 5. Uncoil the Power Plug (8) and insert the plug into the If the sealant (white fluid) does not flow within 0 – 10 seconds through the Sealant Hose (6): vehicle’s 12 Volt power outlet. NOTE: Do not remove foreign objects (e.g., screws or 1. Press the Power Button (4) to turn Off the TIREFIT kit. Disconnect the Sealant Hose (6) from the valve stem. nails) from the tire. Make sure the valve stem is free of debris.
WHAT TO DO IN EMERGENCIES 339 NOTE: If the Mode Select Knob (5) is on Air Mode and If the tire does not inflate to at least 26 psi (1.8 Bar) the pump is operating, air will dispense from the Air pressure within 15 minutes: Pump Hose (7) only, not the Sealant Hose (6). • The tire is too badly damaged. Do not attempt to drive the vehicle further. Call for assistance. If the sealant (white fluid) does flow through the Sealant Hose (6): NOTE: If the tire becomes over-inflated, press the 1.
340 WHAT TO DO IN EMERGENCIES hose, and place the TIREFIT kit in the vehicle storage location. Quickly proceed to (D) “Drive Vehicle”. CAUTION! • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully. • Failure to reinstall the cap on the fitting at the end of the Sealant Hose (6) can result in sealant contacting your skin, clothing, and the vehicle’s interior.
WHAT TO DO IN EMERGENCIES 341 3. Uncoil the Air Pump Hose (7) (black in color) and 2. Disconnect the TIREFIT kit from the valve stem, screw the fitting at the end of hose (7) onto the valve reinstall the cap on the valve stem and unplug from 12 stem. Volt outlet. 4. Check the pressure in the tire by reading the Pressure 3. Place the TIREFIT kit in its proper storage area in the Gauge (3). vehicle. If tire pressure is less than 19 psi (1.3 Bar) , the tire is too 4.
342 WHAT TO DO IN EMERGENCIES (F) Sealant Bottle And Hose Replacement: 1. Uncoil the Sealant Hose (6) (clear in color). 6. Verify that the cap is installed on the fitting at the end of the Sealant Hose (6) and return the hose to its storage area (located on the bottom of the air pump). 2. Locate the round Sealant Bottle release button in the 7. Return the TIREFIT kit to its storage location in the recessed area under the sealant bottle. vehicle. 3. Press the Sealant Bottle release button.
WHAT TO DO IN EMERGENCIES 343 CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. Preparations For Jump-Start The battery is stored under an access cover in the trunk.
344 WHAT TO DO IN EMERGENCIES WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
WHAT TO DO IN EMERGENCIES 345 CAUTION! WARNING! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. 5.
346 WHAT TO DO IN EMERGENCIES 8. Disconnect the opposite end of the positive (+) jumper FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it cable from the positive (+) post of the booster battery. can often be moved by a rocking motion. Turn your 9. Disconnect the positive (+) end of the jumper cable steering wheel right and left to clear the area around the from the remote positive (+) post of the discharged front wheels. Then shift back and forth between REvehicle.
WHAT TO DO IN EMERGENCIES NOTE: Turn off the Electronic Stability Program (ESP) before rocking the vehicle. Refer to “Electronic Stability Program,” or “Traction Control” in “Starting And Operating” for further information. CAUTION! • When “rocking” a stuck vehicle by moving between REVERSE and DRIVE/1st Gear, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure.
348 WHAT TO DO IN EMERGENCIES 3. Turn the ignition switch to the ON/RUN position. 6. Move the shift lever into the NEUTRAL position. 4. Press and maintain firm pressure on the brake pedal. 7. The vehicle may then be started in NEUTRAL. 5. Using a screwdriver or similar tool, press and hold the 8. Reinstall the shift lever override access cover. override tab through the access port on the center conWith Keyless Enter-N-Go — If Equipped sole.
WHAT TO DO IN EMERGENCIES Towing This Vehicle Behind Another Vehicle (Flat Towing With All Four Wheels On The Ground) — Automatic Transmissions Flat towing of vehicles equipped with an automatic transmission is permitted within the following limitations: With The Key Fob Your vehicle may be towed under the following conditions: • The shift lever must be in NEUTRAL 349 CAUTION! • If the transmission is not operative or if the vehicle is to be towed more than 15 mi (24 km) or faster than 30 mph (48 km/h),
350 WHAT TO DO IN EMERGENCIES CAUTION! • Do not attempt to tow this vehicle from the front with sling-type towing equipment. Damage to the front fascia will result. • Do not tow the vehicle from the rear. Damage to the rear sheet metal and fascia will occur. • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and transmission may result.
WHAT TO DO IN EMERGENCIES 351 CAUTION! CAUTION! • If the transmission is not operative then the only approved method of towing is with a flatbed truck. Otherwise, damage to the transmission may result. • Exceeding these towing limits may cause severe transmission damage. Such damage is not covered by the New Vehicle Limited Warranty. • Do not attempt to tow this vehicle from the front with sling-type towing equipment. Damage to the front fascia will result. • Do not tow the vehicle from the rear.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 6.4L . . . . . . . . . . . . . 356 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 363 䡵 Onboard Diagnostic System — OBD II . . . . . . 357 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . 363 ▫ Loose Fuel Filler Cap . . . . . . . . . . . . . . . . . 357 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . 364 䡵 Emissions Inspection And Maintenance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
354 MAINTAINING YOUR VEHICLE ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 377 䡵 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . 395 ▫ Clutch Hydraulic System (Manual Transmission) – If Equipped . . . . . . . . . . . . . 379 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 396 ▫ Manual Transmission – If Equipped . . . . . . . 379 ▫ Automatic Transmission – If Equipped . . . . .
MAINTAINING YOUR VEHICLE ▫ Center High-Mounted Stop Lamp (CHMSL) . . . . . . . . . . . . . . . . . . . . . . . . . . 400 ▫ License Lamp . . . . . . . . . . . . . . . . . . . . . . . 400 䡵 Fluid Capacities 355 䡵 Fluids, Lubricants, And Genuine Parts . . . . . . . 402 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 . . . . . . . . . . . . . . . . . . . . . .
356 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 6.
MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
358 MAINTAINING YOUR VEHICLE Trip Odometer button to turn off the message. If the Normally, the OBD II system will be ready. The OBD II problem continues, the message will appear the next time system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacethe vehicle is started. ment. If the OBD II system should be determined not A loose, improperly installed, or damaged fuel filler cap ready for the I/M test, your vehicle may fail the test.
MAINTAINING YOUR VEHICLE 359 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a. The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
360 MAINTAINING YOUR VEHICLE your vehicle. Refer to these Service Manuals before MAINTENANCE PROCEDURES The pages that follow contain the required maintenance attempting any procedure yourself. services determined by the engineers who designed your NOTE: Intentional tampering with emissions control vehicle. systems may void your warranty and could result in civil Besides those maintenance items specified in the fixed penalties being assessed against you.
MAINTAINING YOUR VEHICLE CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
362 MAINTAINING YOUR VEHICLE NOTE: Under no circumstances should oil change Engine Oil Viscosity (SAE Grade) intervals exceed 6,000 miles (10 000 km) or six months, SAE 5W-40 engine oil is preferred for use in all operating temperatures. whichever occurs first.
MAINTAINING YOUR VEHICLE 363 Disposing Of Used Engine Oil And Oil Filters Engine Air Cleaner Filter Care should be taken in disposing of used engine oil and Refer to the “Maintenance Schedule” for the proper oil filters from your vehicle. Used oil and oil filters, maintenance intervals. indiscriminately discarded, can present a problem to the WARNING! environment.
364 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner filters varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR威 engine air cleaner filters are a high quality filter and are recommended. Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic maintenance required.
MAINTAINING YOUR VEHICLE 365 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
366 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components.
MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. 367 concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed.
368 MAINTAINING YOUR VEHICLE Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Adding Washer Fluid The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals.
MAINTAINING YOUR VEHICLE WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
370 MAINTAINING YOUR VEHICLE CAUTION! • The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine. • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
MAINTAINING YOUR VEHICLE 371 To minimize the possibility of catalytic converter dam- Cooling System age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idle or malfunctioning operating conditions.
372 MAINTAINING YOUR VEHICLE Coolant Checks Check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed, and refilled with fresh coolant. Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the condenser. drain from the coolant recovery bottle.
MAINTAINING YOUR VEHICLE CAUTION! • Mixing of coolants other than specified HOAT engine coolants may result in engine damage and may decrease corrosion protection. If a non-HOAT coolant is introduced into the cooling system in an emergency, it should be replaced with the specified coolant as soon as possible. • Do not use plain water alone or alcohol-based engine coolant (antifreeze) products.
374 MAINTAINING YOUR VEHICLE • Mix a minimum solution of 50% HOAT engine coolant and distilled water. Use higher concentrations (not to exceed 70%) if temperatures below ⫺34°F (⫺37°C) are anticipated. Cooling System Pressure Cap The cap must be fully tightened to prevent loss of coolant and to ensure that coolant will return to the radiator from the coolant recovery bottle.
MAINTAINING YOUR VEHICLE WARNING! (Continued) • Do not use a pressure cap other than the one specified for your vehicle. Personal injury or engine damage may result. 375 engine OFF and cold, the level of the coolant in the bottle should be between the ranges indicated on the bottle. The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for coolant freeze point or replacing coolant. Advise your service attendant of this.
376 MAINTAINING YOUR VEHICLE humidity accumulating on the radiator and being vapor- • Maintain coolant concentration at 50% HOAT engine ized when the thermostat opens, allowing hot coolant to coolant (minimum) and distilled water for proper enter the radiator. corrosion protection of your engine, which contains aluminum components.
MAINTAINING YOUR VEHICLE 377 Brake System In order to assure brake system performance, all brake system components should be inspected periodically. Refer to the “Maintenance Schedule” for the proper maintenance intervals. Check the fluid level in the master cylinder when performing underhood services. WARNING! Overfilling of fluid is not recommended because it may cause leaking in the system. Riding the brakes can lead to brake failure and possibly a collision.
378 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir.
MAINTAINING YOUR VEHICLE WARNING! (Continued) 379 Manual Transmission – If Equipped Fluid Level Check Check the fluid level by removing the fill plug on the left side of the transmission. The fluid level should be at the bottom of the fill hole. Add fluid, if necessary, to maintain the proper level.
380 MAINTAINING YOUR VEHICLE Automatic Transmission – If Equipped policy is the use of special dyes to aid in detecting fluid leaks. In addition, avoid using transmission sealers as they may adversely affect seals. Selection Of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perforCAUTION! mance. Use only manufacturer’s recommended transmission fluid.
MAINTAINING YOUR VEHICLE CAUTION! • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information.
382 MAINTAINING YOUR VEHICLE Change Axle Fluid What Causes Corrosion? Refer to the “Maintenance Schedule” for the proper Corrosion is the result of deterioration or removal of maintenance intervals. paint and protective coatings from your vehicle. Appearance Care And Protection From Corrosion The most common causes are: Protection Of Body And Paint From Corrosion Vehicle body care requirements vary according to geographic locations and usage.
MAINTAINING YOUR VEHICLE • If insects, tar, or other similar deposits have accumulated on your vehicle, use MOPAR威 Super Kleen Bug and Tar Remover or equivalent to remove. 383 CAUTION! (Continued) • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • Use a high quality cleaner wax, such as MOPAR威 Cleaner Wax or equivalent to remove road film, stains and to protect your paint finish. Take care never to Special Care scratch the paint.
384 MAINTAINING YOUR VEHICLE have your vehicle repaired as soon as possible. The non-acidic cleaner. Do not use scouring pads, steel wool, cost of such repairs is considered the responsibility of a bristle brush, or metal polishes. Only MOPAR威 or equivalent is recommended. Do not use oven cleaner. the owner. Avoid automatic car washes that use acidic solutions or • If you carry special cargo such as chemicals, fertilizers, harsh brushes that may damage the wheels’ protective de-icer salt, etc.
MAINTAINING YOUR VEHICLE 385 • For grease stains, apply MOPAR威 Multi-Purpose Cleaner or equivalent to a clean, damp cloth and remove the stain. Use a fresh, damp towel to remove soap residue. Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth.
386 MAINTAINING YOUR VEHICLE quarter window equipped with the radio antenna. Do Cleaning Headlights Your vehicle has plastic headlights that are lighter and not use scrapers or other sharp instruments that may less susceptible to stone breakage than glass headlights. scratch the elements. Plastic is not as scratch resistant as glass; and therefore, When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using.
MAINTAINING YOUR VEHICLE 387 Seat Belt Maintenance FUSES Do not bleach, dye, or clean the belts with chemical Integrated Power Module solvents or abrasive cleaners. This will weaken the fabric. The Integrated Power Module is located in the engine Sun damage can also weaken the fabric. compartment. This module contains fuses and relays. If the belts need cleaning, use MOPAR威 Total Clean or equivalent, a mild soap solution, or lukewarm water. Do not remove the belts from the vehicle to wash them.
388 MAINTAINING YOUR VEHICLE CAUTION! • When installing the integrated power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the integrated power module and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse 9 — 10 30 Amp Pink 11 30 Amp Pink 12 40 Amp Green 13 50 Amp Red 14 — MiniFuse — — — — — — Description — Windshield Wiper Anti-Lock Brake System (ABS) Valves Radiator Fan Lo/ High Anti-Lock Brake System (ABS) Pump Motor — Cavity Cartridge Fuse 15 50 Amp Red 16 — 17 — 18 — 19 — 20 — 21 — 22 — MiniFuse — — — — — — — — 389 Description Radiator Fan — — — — — — — 7
390 MAINTAINING YOUR VEHICLE Rear Power Distribution Center There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays.
MAINTAINING YOUR VEHICLE CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
392 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse 5 30 Amp Pink 6 — 7 — 8 — 9 — 10 — 11 * — MiniFuse — 20 Amp Yellow 15 Amp Blue 15 Amp Blue 20 Amp Yellow 25 Amp Natural — Description Heated Seats – If Equipped Fuel Pump Audio Amplifier – If Equipped Diagnostic Link Connector (DLC)/ Wireless Control Module (WCM)/ Wireless Ignition Node (WIN) Power Outlet Vacuum Pump – If Equipped — Cavity Cartridge Fuse 12 * — 13 * — 14 — 15 16 — — 17 — 18 — 19 — 20 — MiniFuse — — 10 Amp Red — 20
MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse 21 — 22 — 23 — 24 — 25 — 26 — 27 — 28 — MiniFuse — — — — — — 10 Amp Red 10 Amp Red Description — — — — — — Occupant Restraint Controller (ORC) Ignition Run, AC Heater Control/ Occupant Restraint Controller (ORC) Cavity Cartridge Fuse 29 — MiniFuse 5 Amp Orange 30 — 10 Amp Red 31 32 33 34 35 — — — — — — — — — 5 Amp Orange 393 Description Cluster/Electronic Stability Program (ESP)/Powertrain Control Module (PCM)/STOP LIGHT Switch Door Modules/ Power
394 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse 36 — 37 — 38 — 39 — 40 — 41 42 — 30 Amp Pink MiniFuse 25 Amp Natural 15 Amp Blue 10 Amp Red 10 Amp Red 5 Amp Orange — — Description Hands-Free Phone – If Equipped/Radio/ Amplifier Feed Transmission Cargo Light/Vehicle Information Module – If Equipped Heated Mirrors – If Equipped Auto Inside Rearview Mirror/Heated Seats – If Equipped/Switch Bank — Front Blower Motor Cavity Cartridge Fuse 43 30 Amp Pink 44 20 Amp Blue MiniFuse — — Descriptio
MAINTAINING YOUR VEHICLE 395 VEHICLE STORAGE REPLACEMENT BULBS If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your LIGHT BULBS – Interior Bulb Number battery. Rear Courtesy/Reading Lamps . . . . . . . . . . . . . W5W Rear Compartment (Trunk) Lamp . . . . . . . . . . . . . 562 • Disconnect the negative cable from the battery. Overhead Console Reading Lamps . . . . . . . . . . . .
396 MAINTAINING YOUR VEHICLE LIGHT BULBS – Exterior Bulb Number Headlamp – High Intensity Discharge (HID) . . . . . D1S (Serviced at Authorized Dealer) Halogen Headlamp. . . . . . . . . . . . . . . . . . . . . . . H13 Front Park/Turn Lamp. . . . . . . . . . . . . . . . . . . 3157A Front Fog Lamp . . . . . . . . . . . . . . . . . . . . . . PSX24W (Serviced at Authorized Dealer) Front Side Marker . . . . . . . . . . . . . . . . . . . . . . . . 168 Tail Lamp . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE WARNING! A transient high tension occurs at the bulb sockets of HID headlamps when the headlamp switch is turned ON. It may cause serious electrical shock or electrocution if not serviced properly. See your authorized dealer for service. 397 Front/Rear Side Marker Lamp 1. Remove the front/rear side marker. Use a fiber stick or similar tool to gently pry the lamp on the outboard side to disengage the clip.
398 MAINTAINING YOUR VEHICLE Tail/Turn and Stop Lamp 1. Open the trunk. 2. Using a screwdriver, remove the tail lamp retainer. 4. Pull back the trunk liner. 5. Remove the remaining fasteners from the back of the tail lamp assembly. 3. Remove the fasteners from the back of the tail lamp 6. Pull the tail lamp assembly clear from the vehicle to access the bulbs. assembly.
MAINTAINING YOUR VEHICLE 399 11. Reinstall the bulb and socket assembly into the tail lamp assembly, and then turn it clockwise. 12. Reinstall the tail lamp assembly, fasteners, electrical connector, and trunk liner. 13. Reinstall tail lamp retainer. 7. Push the electrical connector locking tab to the side. 8. Disconnect the electrical connector. 9. Turn the appropriate bulb and socket assembly counterclockwise to remove it from the tail lamp assembly. 10.
400 MAINTAINING YOUR VEHICLE Center Tail/Backup Lamp See your authorized dealer for bulb replacement. Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately. The CHMSL must be replaced as an assembly, see your authorized dealer. License Lamp 1. Remove the screws securing the lamp to the rear fascia. 2. Remove the bulb and socket assembly. 3. Disconnect the bulb from the socket assembly and install the replacement bulb. 1 — License Lamp Bulb 2 — Socket 4.
MAINTAINING YOUR VEHICLE 401 FLUID CAPACITIES Fuel (Approximate) Engine Oil with Filter 6.4 Liter Engine (SAE 5W-40, API Certified) Cooling System * 6.4 Liter Engine (MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent) * Includes heater and coolant recovery bottle filled to MAX level. U.S. 19 Gallons Metric 72 Liters 7 Quarts 6.6 Liters 15 Quarts 14.
402 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent.
MAINTAINING YOUR VEHICLE 403 Chassis Component Manual Transmission – If Equipped Automatic Transmission – If Equipped Brake Master Cylinder Power Steering Reservoir Rear Axle Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 406 ▫ Required Maintenance Intervals . . . . . . . . . .
M A I N T E N A N C E 406 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done S anytime a malfunction is suspected.
MAINTENANCE SCHEDULES 407 M A I N T E N A N C • Check the engine oil level. Refer to “Maintenance E • Change your engine oil more often if you drive your “Understanding Your Instrument Panel” or under “Instrument Cluster Description/Odometer/Trip Odomvehicle off-road for an extended period of time. eter” in “Understanding Your Instrument Panel” for • Under no circumstances should oil change intervals further information. exceed 6,000 miles (10,000 km) or six months, whichever comes first.
M A I N T E N A N C E 408 MAINTENANCE SCHEDULES Once a Month • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery, and clean and tighten the terminals CAUTION! as required. • Check the fluid levels of the coolant reservoir, brake master cylinder, and power steering, and add as S C needed. H E • Check all lights and other electrical items for correct D operation.
MAINTENANCE SCHEDULES 6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 409 M 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
M 410 MAINTENANCE SCHEDULES A I 18,000 Miles (30,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Inspect the rear axle fluid. E 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary.
MAINTENANCE SCHEDULES 30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule 36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace if necessary. ❏ Inspect the rear axle fluid. ❏ Inspect the manual transmission fluid (if equipped), add as necessary.
M 412 MAINTENANCE SCHEDULES A I 42,000 Miles (70,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires.
MAINTENANCE SCHEDULES 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. Inspect the brake linings, and replace if necessary. Inspect the CV joints. Inspect the exhaust system.
M 414 MAINTENANCE SCHEDULES A I 54,000 Miles (90,000 km) or N T 54 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Inspect the rear axle fluid. E 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter. Inspect the brake linings, and replace if necessary.
MAINTENANCE SCHEDULES 66,000 Miles (110,000 km) or 66 Months Maintenance Service Schedule 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace if necessary. ❏ Inspect the CV joints. ❏ Inspect the rear axle fluid. ❏ Inspect the exhaust system.
M 416 MAINTENANCE SCHEDULES A I 78,000 Miles (130,000 km) or N T 78 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C E 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Inspect the brake linings, and replace if necessary.
MAINTENANCE SCHEDULES 90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule 96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. ❏ Replace the spark plugs. ❏ Inspect the brake linings, and replace if necessary. ❏ Inspect the CV joints. ❏ Inspect the exhaust system.
M 418 MAINTENANCE SCHEDULES A I 102,000 Miles (170,000 km) or N T 102 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Flush and replace the engine coolant at E S C H E D U L E S 8 102,000 miles (170 000 km) or 60 months whichever comes first.
MAINTENANCE SCHEDULES 114,000 Miles (190,000 km) or 114 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 419 M 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate tires. Replace the engine air cleaner filter. Inspect the brake linings, and replace if necessary.
M 420 MAINTENANCE SCHEDULES A I 126,000 Miles (210,000 km) or N T 126 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate tires. C ❏ Inspect the rear axle fluid. E S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
MAINTENANCE SCHEDULES 138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires.
M 422 MAINTENANCE SCHEDULES A I 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule N ❏ Change the engine oil and engine oil filter. T E ❏ Rotate tires. N ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter, and replace if necessary. A ❏ Inspect the brake linings, and replace if necessary. N ❏ Inspect the CV joints. C ❏ Inspect the exhaust system.
MAINTENANCE SCHEDULES 150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate tires. ❏ Replace the engine air cleaner filter. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
M A I N T E N A N C E S C H E D U L E S 8 424 MAINTENANCE SCHEDULES * This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 429 ▫ Prepare For The Appointment . . . . . . . . . . . 427 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 429 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 427 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
426 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 433 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 433 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 433 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 427 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
428 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 Auburn Hills, MI 48321–8004 solved with this process. Phone: (800) 423–6343 • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center P.O. Box 1621 ship. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
430 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 431 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
432 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC vemaintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. 433 significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
434 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
436 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . 276,279 ABS (Anti-Lock Brake System) . . . . . . . . . . . . 279,282 Adding Engine Coolant (Antifreeze) . . . . . . . . . . 373 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . 368 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 320 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 363 Air Conditioner Maintenance . . . . . . . . . . .
INDEX Automatic Door Locks . . . . . . . . . . . . . . . . . . . 32,33 Automatic Headlights . . . . . . . . . . . . . . . . . . . . 139 Automatic Temperature Control (ATC) . . . . . . . . . 237 Automatic Transaxle Special Additives . . . . . . . . . . . . . . . . . . . . . 380 Automatic Transmission . . . . . . . . . . . . . 264,380,381 Adding Fluid . . . . . . . . . . . . . . . . . . . . 381,403 Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . 268 Fluid and Filter Changes . . . . . . . . . .
438 INDEX Brightness, Interior Lights . . . . . . . . . . . . . . . . . . 144 Chart, Tire Sizing . . . . . . . . . . . . . . . . . . . . . . . . 292 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 395,396 Check Engine Light Bulbs, Light . . . . . . . . . . . . . . . . . . . . . . . . . . 83,395 (Malfunction Indicator Light) . . . . . . . . . . . . . . . 358 Checking Your Vehicle For Safety . . . . . . . . . . . . . 80 Calibration, Compass . . . . . . . . . . . . . . . . . . . . .
INDEX Connector UCI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 Universal Consumer Interface (UCI) . . . . . . . 226 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Console, Floor . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Console, Overhead . . . . . . . . . . . . . . . . . . . . . . . 151 Contract, Service . . . . . . . . . . . . . . . . . . . . . . . . 429 Coolant Pressure Cap (Radiator Cap) . . . . . . . . . . 374 Cooling System . . . . . . . . .
440 INDEX Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . 348 Disposal Antifreeze (Engine Coolant) . . . . . . . . . . . . . 375 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 363 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Door Locks, Automatic . . . . . . . . . . . . . . . . . . . . 32 Door Opener, Garage . . . . . . . . . . . . . . . . . . . . . 152 Driving On Slippery Surfaces . . . . . . . . . . . . . . . . . .
INDEX Fails to Start . . . . . . . . . . . . . . . . . . . . . . . . 255 Flooded, Starting . . . . . . . . . . . . . . . . . . . . . 255 Fuel Requirements . . . . . . . . . . . . . . . . . . . . 318 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . 342 Oil . . . . . . . . . . . . . . . . . . . . . . . . . 361,401,402 Oil Change Interval . . . . . . . . . . . . . . . . . . . 361 Oil Filler Cap . . . . . . . . . . . . . . . . . . . . . . . 362 Oil Filter . . . . . . . . . . . . . . . . . . . . . .
442 INDEX Fluid Level Checks Automatic Transmission . . . . . . . . . . . . . . . . 380 Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377 Cooling System . . . . . . . . . . . . . . . . . . . . . . 372 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 361 Power Steering . . . . . . . . . . . . . . . . . . . . . . 275 Fluid, Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX Speedometer . . . . . . . . . . . . . . . . . . . . . . . . 174 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 174 Gear Select Lever Override . . . . . . . . . . . . . . . . . 347 General Information . . . . . . . . . . . . 17,26,123,269,317 General Maintenance . . . . . . . . . . . . . . . . . . . . . 360 Glass Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 386 Gross Axle Weight Rating . . . . . . . . . . . . . . . . . . 325 Gross Vehicle Weight Rating . . . . . . . . . .
444 INDEX Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,14 Ignition Key Removal . . . . . . . . . . . . . . . . . . . . . 14 Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . . 20 Immobilizer (Sentry Key) . . . . . . . . . . . . . . . . . . . 16 Infant Restraint . . . . . . . . . . . . . . . . . . . . . . . . 70,71 Information Center, Vehicle . . . . . . . . . . . . . . . . . 184 Instrument Cluster .
INDEX Leaks, Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Life of Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305 Light Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . 83,395 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83,139 Airbag . . . . . . . . . . . . . . . . . . . . 63,64,68,81,176 Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Anti-Lock . . . . . . . . . . . . . . . . . . . . . . .
446 INDEX Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . 177 Parade Mode (Daytime Brightness) . . . . . . . . 144 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Reading . . . . . . . . . . . . . . . . . . . . . . . . 143,151 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . 178 Security Alarm (Theft Alarm) . . . . . . . . . . . . 181 Service . . . . . . . . . . . . . . . . . . . . . . . . . 395,396 Service Engine Soon (Malfunction Indicator) . . . . . . . . . . .
INDEX Manual, Service . . . . . . . . . . . . . . . . . . . . . . . . . 431 Map/Reading Lights . . . . . . . . . . . . . . . . . . 143,151 Master Cylinder (Brakes) . . . . . . . . . . . . . . . . . . 377 Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 Mini-Trip Computer . . . . . . . . . . . . . . . . . . . . . . 189 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Automatic Dimming . . . . . . . . . . . . . . . . . . . 89 Electric Powered . . . . . . . . .
448 INDEX Materials Added to . . . . . . . . . . . . . . . . . . . 362 Recommendation . . . . . . . . . . . . . . . . . . 362,401 Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . 362 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . 362,401 Onboard Diagnostic System . . . . . . . . . . . . . . 357,358 Opener, Garage Door (HomeLink®) . . . . . . . . . . . 152 Operating Precautions . . . . . . . . . . . . . . . . . . . . 357 Operator Manual (Owner’s Manual) . . . . . . . . . . . .
INDEX 449 Remote Control Programming Transmitters (Remote Keyless Entry) . . . . . . . . . . . . . . . . . . . . 21 Starting System . . . . . . . . . . . . . . . . . . . . . . . 27 Remote Keyless Entry (RKE) . . . . . . . . . . . . . . . . . 21 Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . . . . . 303 Remote Sound System (Radio) Controls . . . . . . . . 234 Radiator Cap (Coolant Pressure Cap) . . . . . . . . . . 374 Remote Starting System . . . . . . . . . . . . . . . . . . . .
450 INDEX Safety Defects, Reporting . . . . . . . . . . . . . . . . . . 430 Safety Information, Tire . . . . . . . . . . . . . . . . . . . 290 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Safety, Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . 80 Satellite Radio Antenna . . . . . . . . . . . . . . . . . . . 223 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . 406 Seat Belt Maintenance . . . . . . . . . . . . . . . . . . . . 387 Seat Belt Reminder . . . .
INDEX Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . 431 Setting the Clock . . . . . . . . . . . . . . . . . . . . . 203,212 Settings, Personal . . . . . . . . . . . . . . . . . . . . . . . . 198 Shift Indicator Light . . . . . . . . . . . . . . . . . . . . . . 260 Shift Lever Override . . . . . . . . . . . . . . . . . . . . . . 347 Shift Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . 259 Shift Speeds, Manual Transmission . . . . . . . . . . . 259 Shifting . . . . . . . . . .
452 INDEX Steering Wheel Mounted Sound System Controls . . . . . . . . . . . . . . . . . . . . . . . . . 234 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395 Storage, Vehicle . . . . . . . . . . . . . . . . . . . . . . 242,395 Storing Your Vehicle . . . . . . . . . . . . . . . . . . . . . . 395 Stuck, Freeing . . . . . . . . . . . . . . . . . . . . . . . . . . 346 Sun Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Sunglasses Storage . . . . . . . . . . . . .
INDEX Quality Grading . . . . . . . . . . . . . . . . . . . . . 433 Radial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Replacement . . . . . . . . . . . . . . . . . . . . . . . . 306 Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . 290,300 Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . 309 Spinning . . . . . . . . . . . . . . . . . .
454 INDEX Uniform Tire Quality Grades . . . . . . . . . . . . . . . . 433 Universal Consumer Interface (UCI) Connector . . . 226 Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 152 Unleaded Gasoline . . . . . . . . . . . . . . . . . . . . . . . 318 Untwisting Procedure, Seat Belt . . . . . . . . . . . . . . 51 Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . 196 Vehicle Certification Label . . . . . . .
Windshield Defroster . . . . . . . . . . . . . . . . . . . 82,240 Windshield Washers . . . . . . . . . . . . . . . . 145,146,368 Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 Windshield Wiper Blades . . . . . . . . . . . . . . . . . . 367 Windshield Wipers . . . . . Wiper Blade Replacement Wiper, Delay . . . . . . . . . Wipers, Intermittent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX 455 . . . .
456 INDEX
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
2011 Grand Caravan 2011 Chrysler Group LLC 11D492-126-AE Grand Caravan OWNER’S MANUAL Fifth Edition Printed in U.S.A. 291686.ps 11Y532-126-AA Chrysler 1" gutter 07/14/2010 08:26:13 2011 Grand Caravan 2011 OWNER’S MANUAL Chrysler Group LLC 11Y532-126-AA First Edition Printed in U.S.A.