User Guide User Manual

SHIFT LEVER OVERRIDE

• If a malfunction occurs and the shift

lever cannot be moved out of the PARK

position, you can use the following

procedure to temporarily move the shift

lever:

• To access the shift lever override,

locate and remove the removable plug

in the right side of the shift lever

housing.

• Firmly set the parking brake.

• Turn the ignition switch to the ACC or

ON position without starting the

engine.

• Press and maintain firm pressure on

the brake pedal.

• Using a screwdriver or similar tool, press and hold the override tab through the

access port on the center console.

• Move the shift lever into the NEUTRAL position.

• The vehicle may then be started in NEUTRAL.

• Reinstall the override cover.

WHAT TO DO IN EMERGENCIES