2012 Durango 2012 OWNER’S MANUAL Chrysler Group LLC 12WD01-126-AF Sixth Edition Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . . 8 䡵 Rollover Warning . . . . . . . . . . . . . . . . . . . . . . . 5 䡵 Vehicle Identification Number .............. 8 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 6 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle. It can go places and perform tasks that conventional passenger cars are not intended. It handles and maneuvers differently from many passenger cars both on-road and off-road, so take time to become familiar with your vehicle.
INTRODUCTION 5 NOTE: After reviewing the owner information, it Do not attempt sharp turns, abrupt maneuvers, or other should be stored in the vehicle for convenient referenc- unsafe driving actions that can cause loss of vehicle control. Failure to operate this vehicle safely may result ing and remain with the vehicle when sold. in a collision, rollover of the vehicle, and severe or fatal When it comes to service, remember that your authorized injury. Drive carefully.
6 INTRODUCTION Failure to use the driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million annually. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up.
INTRODUCTION 7
8 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions.
INTRODUCTION 9 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 14 䡵 Vehicle Security Alarm — If Equipped . . . . . . . . 20 ▫ Wireless Ignition Node (WIN) . . . . . . . . . . . . 14 ▫ Rearming The System . . . . . . . . . . . . . . . . . . 21 ▫ Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . 21 ▫ Removing Key Fob From Ignition . . . . . . . . . . 16 ▫ To Disarm The System .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 26 䡵 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 ▫ Programming Additional Transmitters . . . . . . 26 ▫ Power Windows . . . . . . . . . . . . . . . . . . . . . . 42 ▫ Transmitter Battery Replacement . . . . . . . . . . 27 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 45 ▫ General Information . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 ▫ Energy Management Feature . . . . . . . . . . . . . 60 ▫ Event Data Recorder (EDR) . . . . . . . . . . . . . . 80 ▫ Seat Belt Pretensioners . . . . . . . . . . . . . . . . . 60 ▫ Child Restraints . . . . . . . . . . . . . . . . . . . . . . 81 ▫ Supplemental Active Head Restraints (AHR) . . 61 䡵 Engine Break-In Recommendations . . . . . . . . . . 97 ▫ Enhanced Seat Belt Use Reminder System (BeltAlert威) . . . . . . . . . . . . . . . . . . . . . . . . .
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the Key Fob into the ignition switch with either side up. Wireless Ignition Node (WIN) The Wireless Ignition Node (WIN) operates similar to an ignition switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired position. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove the emergency key, slide the mechanical latch Removing Key Fob From Ignition at the top of the Key Fob sideways with your thumb and Place the shift lever in PARK. Turn the Key Fob to the OFF position and then remove the Key Fob. then pull the key out with your other hand. With the Keyless Enter-N-Go feature, the EVIC will display the ignition switch position “OFF/ACC/RUN”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 • The power window switches, radio, power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the OFF position. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not leave the key fob in or near the vehicle, and do not leave Keyless Enter-N-Go in the ACC or ON/RUN mode. A child could operate power windows, other controls, or move the vehicle. • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. CAUTION! An unlocked car is an invitation to thieves.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if an invalid Key Fob is used to start the engine. CAUTION! The Sentry Key威 Immobilizer system is not compatible with some after-market remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! • Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unattended. • With Keyless Enter-N-Go, always remember to place the ignition in OFF. At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location. This number is required for authorized dealer replacement of Key Fobs.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 audio and visual signals, the horn will sound, the headlights will turn on, park lamps and/or turn signals will flash repeatedly for three minutes. If the disturbance is still present (driver’s door, passenger door, other doors, ignition) after three minutes, the headlights, park lamps and/or turn signals will flash for an additional 15 minutes. To Arm The System Follow these steps to arm the Vehicle Security Alarm: 1.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE exterior zone (refer to ⬙Keyless Enter-N-Go⬙ in ⬙Things To • Cycle the vehicle ignition system out of the OFF Know Before Starting Your Vehicle⬙ for further informaposition. tion). • For vehicles equipped with Keyless Enter-N-Go, press the Keyless Enter-N-Go Start/Stop button • Press the LOCK button on the Remote Keyless Entry (requires at least one valid Key Fob in the vehicle). (RKE) transmitter. 3. If any doors are open, close them.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • When the Vehicle Security Alarm is armed, the interior Tamper Alert power door lock switches will not unlock the doors. If something has triggered the Vehicle Security Alarm in your absence, the horn will sound three times and the The Vehicle Security Alarm is designed to protect your exterior lights blink three times when you unlock the vehicle; however, you can create conditions where the doors. Check the vehicle for tampering.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Inserting the Key Fob with RKE transmitter into the ignition switch disables the system from responding to any button presses from that RKE transmitter. Driving at speeds 5 mph (8 km/h) and above disables the system from responding to all RKE transmitter buttons for all • The Illuminated Entry system will not operate if the RKE transmitters. dimmer control is in the “Dome defeat” position (extreme bottom position).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Flash Lamps With Lock This feature will cause the turn signal lamps to flash when the doors are locked or unlocked with the RKE transmitter. This feature can be turned on or off. To change the current setting, refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerProgrammable Features)” in “Understanding Your InstruRefer to “Keyless Enter-N-Go” under “Things To Know ment Panel” for further information.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Doors Press and release the LOCK button on the RKE transmitter to lock all doors. The turn signal lamps will flash and the horn will chirp to acknowledge the signal. Using The Panic Alarm To turn the Panic Alarm feature on or off, press and hold the PANIC button on the RKE transmitter for at least one second and release.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Transmitter Battery Replacement The recommended replacement battery is one CR2032 battery. 2 NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit board. 1. Remove the emergency key by sliding the mechanical latch at the top of the RKE transmitter sideways with your thumb and then pull the key out with your other hand.
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal. Separating RKE Transmitter Inserting Emergency Key Into Slot 3. Remove and replace the battery. When replacing the battery, match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 4. To assemble the RKE transmitter case, snap the two If your RKE transmitter fails to operate from a normal distance, check for these two conditions: halves together. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: 1. A weak battery in the RKE transmitter. The expected life of the battery is a minimum of three years. 2.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Use Remote Start • System not disabled from previous remote start event All of the following conditions must be met before the • Vehicle theft alarm not active engine will remote start: • Ignition in Off position for Keyless Enter-N-Go vehicle • Shift lever in PARK • Doors closed WARNING! • Hood closed • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Remote Start Abort Message On Electronic Vehicle To Enter Remote Start Mode Press and release the REMOTE START button Information Center (EVIC) — If Equipped The following messages will display in the EVIC if the on the RKE transmitter twice within five secvehicle fails to remote start or exits remote start premaonds. The vehicle doors will lock, the parking turely: lights will flash and the horn will chirp twice (if programmed).
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two consecutive times with the RKE transmitter. However, the ignition must be cycled by pushing the START/STOP button twice (or the ignition switch must be cycled to the ON/RUN position) before you can repeat the start sequence for a third cycle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 • For vehicles not equipped with the Keyless EnterN-Go feature, the message “Remote Start Active — Insert Key and Turn to Run” will display in the EVIC until you insert the key. Refer to “Electronic Vehicle Information Center (EVIC)” for further information. Remote Start Comfort Systems — If Equipped When remote start is activated, the heated steering wheel, and driver heated seat features will automatically turn on in cold weather.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS Manual Door Locks The power door locks can be manually locked from inside the vehicle by using the door lock knob. To lock each door, push the door lock knob on each door trim panel downward. To unlock the front doors, pull the inside door handle to the first detent. To unlock the rear doors, pull the door lock knob on the door trim panel upward. If the lock knob is down when the door is closed, the door will lock.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you press the door lock switch while the Key Fob is in Vehicle Information Center (EVIC)/Personal Settings the ignition switch and the driver’s door is open, the (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. doors will not lock. If a rear door is locked, it cannot be opened from inside Child-Protection Door Lock System — Rear the vehicle without first unlocking the door.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 3. Repeat steps 1 and 2 for the opposite rear door. 2 Child-Protection Door Lock Function Child-Protection Door Lock Location WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged (locked).
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For emergency exit with the system engaged, move the lock knob up (unlocked position), roll down the window and open the door with the outside door handle. the handle may time out. Pulling the deactivated front door handle will reactivate the door handle’s Passive Entry feature.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 To Unlock From The Passenger Side: With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors automatically. The interior door panel lock knob will raise when the door is unlocked.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If one of the vehicle doors is open and the door panel switch is used to lock the vehicle, once all open doors have been closed the vehicle checks the inside and outside of the vehicle for any valid Passive Entry RKE transmitters.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 refer to “Electronic Vehicle Information Center (EVIC)/ With one of the vehicle’s Passive Entry RKE transmitters Personal Settings (Customer-Programmable Features)” in within 5 ft (1.5 m) of the driver or passenger front door “Understanding Your Instrument Panel”. handle, press the door handle LOCK button to lock all four doors and liftgate.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows The power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door/rear doors which operates the front passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the ON/RUN or ACCESSORY position. Power Window Switches The power window switches remain active for up to 10 minutes after the ignition switch has been turned OFF.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Auto-Down Both the driver and front passenger window switches have an “Auto-Down” feature. Press the window switch past the first detent, release, and the window will go down automatically. To cancel the “Auto-Down” movement, operate the switch in either the up or down direction and release the switch. To stop the window from going all the way up during the Auto Up operation, push down on the switch briefly.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Resetting The Auto Up Feature Should the Auto Up feature stop working, the window probably needs to be reset. To reset Auto Up: 1. Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Liftgate — If Equipped The power liftgate may be opened by pulling up on the liftgate handle or by pressing the LIFTGATE button on the Remote Keyless Entry (RKE) transmitter. Press the LIFTGATE button on the RKE transmitter twice within five seconds, to open the power liftgate. Once the liftgate is open, pressing the button twice within five seconds a second time will close the liftgate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear. Make sure the liftgate is closed and latched before driving away. button to operate. If the liftgate is not fully open, press the Liftgate button on the Key Fob to fully open the liftgate, and then press it again to close.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the power liftgate encounters multiple obstructions within the same cycle, the system will automatically stop and the liftgate must be opened or closed manually. WARNING! (Continued) • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. Do not use the recirculation mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 • Supplemental Active Head Restraints (AHR) located on top of the front seats (integrated into the head restraint) way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat — if equipped • Supplemental Side Air Bag Inflatable Curtains Please pay close attention to the information in this (SABIC) for the driver and passengers seated next to a section.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the ride properly buckled up in the rear seat. Never allow risk of harm from a deploying air bag: children to slide the shoulder belt behind them or under their arm. 1. Children 12 years old and under should always ride buckled up in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 4. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between you and the door. 5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under ⴖIf You Need Assistanceⴖ. WARNING! • Relying on the air bags alone could lead to more severe injuries in a collision.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Buckle up even though you are an excellent driver, even on short trips. Someone on the road may be a poor driver and cause a collision that includes you. This can happen far away from home or on your own street. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 WARNING! (Continued) • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly. 2. The seat belt latch plate is above the back of your seat.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 WARNING! (Continued) • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your shoulder so that your strongest bones will take the force in a collision. • A shoulder belt placed behind you will not protect you from injury during a collision.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Position the shoulder belt on your chest so that it is 6. To release the belt, push the red button on the buckle. comfortable and not resting on your neck. The retractor The belt will automatically retract to its stowed position. will withdraw any slack in the belt. If necessary, slide the latch plate down the webbing to allow it to retract fully. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. 2 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing the release button. To verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage until it is locked into position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 out only the amount of webbing necessary to comfort- 3. Allow the belt to retract. As the belt retracts, you will ably wrap around the occupant’s mid-section. Slide the hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode. latch plate into the buckle until you hear a ⬙click.⬙ Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically prelocked.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Energy Management Feature This vehicle has a safety belt system with an Energy Management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on collision. Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Supplemental Active Head Restraints (AHR) These head restraints are passive, deployable components, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspection of the head restraint. The head restraint will be split in two halves, with the front half being soft foam and trim, the back half being decorative plastic.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact. However if during a front impact, a secondary rear impact occurs, the AHR may deploy based on several factors, including the severity and type of the impact.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 CAUTION! 1. Grasp the deployed AHR from the rear seat. All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. NOTE: For more information on properly adjusting and positioning the head restraint, refer to “Adjusting Active Head Restraints” in “Understanding The Features Of Your Vehicle”.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 3 — Final Downward Movement To Engage Locking Mechanism 1 — Downward Movement 2 — Rearward Movement 4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Enhanced Seat Belt Use Reminder System (BeltAlert姞) BeltAlert威 is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert威) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unbelted, the Seat Belt Reminder Light will turn on and remain on until both front seat belts are fastened.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE unbuckled while traveling at speeds greater than 5 mph Seat Belts And Pregnant Women (8 km/h), BeltAlert威 will provide both audio and visual We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is notification. the best way to keep the baby safe. The front passenger seat BeltAlert威 is not active when the front passenger seat is unoccupied.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 WARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on several factors, including the severity and type of collision. This vehicle is equipped with Supplemental SeatMounted Side Air Bags (SAB) to provide enhanced protection for an occupant during a side impact. The Supplemental Seat-Mounted Side Air Bags are located in the outboard side of the front seats.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 • Instrument Panel • Knee Impact Bolster • Driver Advanced Front Air Bag • Passenger Advanced Front Air Bag • Supplemental Seat-Mounted Side Air Bags (SAB) Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only. Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • Being too close to the SAB and SABIC air bags during deployment could cause you to be severely injured or killed. The system includes side impact sensors that are calibrated to deploy the SAB and SABIC air bags during impacts that require side air bag occupant protection.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Along with seat belts and pretensioners, Advanced Front Air Bags work with the knee bolsters to provide improved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Also, the ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Air Bag Warning Light will turn off.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Based on several factors, including the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating SAB exits through the seat seam into the space between the occupant and the door. The SAB fully inflate in about 10 milliseconds.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Front And Side Impact Sensors • Turn on the interior lights, which remain on as long as In front and side impacts, front and side impact sensors the battery has power or until the ignition key is can aid the ORC in determining the appropriate response removed. to certain impact events. • Unlock the doors automatically.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you do have a collision which deploys the air bags, any or all of the following may occur: throat irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instructions for cleaning. • The nylon air bag material may sometimes cause abrasions and/or skin reddening to the driver and front passenger as the air bags deploy and unfold.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Maintaining Your Air Bag System WARNING! (Continued) WARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. You could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light You will want to have the air bags ready to inflate for your protection in a collision. The Air Bag Warning Light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components. While the air bag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 • Whether or not the driver and passenger safety belts In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipwere buckled/fastened; ment, can read the information if they have access to the • How far (if at all) the driver was depressing the vehicle or the EDR. accelerator and/or brake pedal; and, Child Restraints • How fast the vehicle was traveling.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seat Owner’s Manual to ensure you have the right seat facing child safety seat. Two types of child restraints can for your child. Use the restraint that is correct for your be used rearward-facing: infant carriers and convertible child. child seats. The infant carrier is only used rearward-facing in the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 WARNING! • Rearward-facing child seats must never be used in the front seat of a vehicle with the front passenger air bag. An air bag deployment could cause severe injury or death to infants in this position. • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE restraint and slide the latch plate into the buckle. Then, pull the shoulder belt until it is fully extended from the retractor. Allow the belt to return into the retractor, pulling on the excess webbing to tighten the lap portion around the child restraint. For additional information, refer to ⬙Automatic Locking Retractors Mode⬙ earlier in the Occupant Restraints Section of the owners’ manual. NOTE: For additional information, refer to www.seatcheck.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly. If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they should use a belt-positioning booster seat. The child and belt-positioning booster seat are held in the vehicle by the lap/shoulder belt.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE lower anchors can be are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. The vehicle’s seat belt must be used for the center position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Installing The LATCH-Compatible Child Restraint System We urge you to carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that were provided with the child restraint system.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Latch Anchorages (Captain’s Chair) In addition, there are top tether strap anchorages behind each rear seating position located on the back of the seat. To access the top tether strap anchorages behind the rear seat, pull the carpeted floor panel away from the seat back, this will expose the top tether strap anchorages.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 2 Top Tether Strap Anchorage (Located on Seatback) Top Tether Strap Mounting (60/40 Seat)
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap. Forwardfacing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 gap panel. They are not visible until you fold the gap panel down. Do not use the cargo tie down hooks located on the floor behind the seat. Finally, tighten all three straps as you push the child restraint rearward and downward into the seat, removing slack in the straps according to the child restraint manufacturer’s instructions. WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE First Row Second Row — Captains Chair Second Row — Bench Second Row Third Row Driver CRS Lock N/A ALR Center CRS Lock N/A N/A Passenger CRS Lock ALR ALR ALR ALR ALR ALR ALR ALR N/A ALR ALR extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. As the belt retracts, you will hear a ratcheting sound. This indicates the safety belt is now in the Automatic Locking mode. 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 the buckle around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secure, try a different seating position. 2 To attach a child restraint tether strap: For rearward facing infant seats secured in the center seat position with the vehicle seat belts, the rear center seat position has an armrest tether that secures the arm rest in the upward position.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Pull down on the tether to unhook it from the plastic seat and attach the hook to the top tether anchor located on the backing, then raise the armrest and attach the tether hook back of the seat. To access the top tether strap anchorages behind the rear seat, pull the carpeted floor panel away to the strap located on the front of the arm rest. from the seat back, this will expose the top tether strap anchorages.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 2 Top Tether Strap Anchorage (Located on Seatback) Top Tether Strap Mounting (60/40 Seat)
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. • Do not use the cargo tie downs located on the load floor. Improper usage of the tether can lead to a failure of an infant or child restraint. The child could be badly injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 behind the gap panel. Please note the top tether anchorages are not visible until you fold the gap panel down. Do not use the cargo tie down hooks located on the floor behind the seats. While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided.
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAFETY TIPS Exhaust Gas Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. Safety Checks You Should Make Inside The Vehicle Seat Belts Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 WARNING! (Continued) • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly installed, if not equipped from the factory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . 110 ▫ Automatic Dimming Mirror — If Equipped . . 110 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . 111 ▫ Outside Mirrors Folding Feature . . . . . . . . . 112 ▫ Outside Automatic Dimming Mirrors — If Equipped . . . . . . . . . . . . . . . . . . . . . . . .
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Phone Call Features . . . . . . . . . . . . . . . . . . 132 ▫ Power Lumbar — If Equipped . . . . . . . . . . . 162 ▫ Uconnect™ Phone Features . . . . . . . . . . . . . 135 ▫ Manual Front Passenger Seat Forward/ Rearward Adjustment . . . . . . . . . . . . . . . . . 163 ▫ Advanced Phone Connectivity . . . . . . . . . . . 140 ▫ Things You Should Know About Your Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . 142 ▫ General Information . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 䡵 Driver Memory Seat — If Equipped . . . . . . . . 182 ▫ Daytime Running Lights — If Equipped . . . . 191 ▫ Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 ▫ Headlight Delay . . . . . . . . . . . . . . . . . . . . . 191 ▫ Memory Position Recall . . . . . . . . . . . . . . . . 184 ▫ Parking Lights And Panel Lights . . . . . . . . . 191 ▫ Fog Lights — If Equipped . . .
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . 197 䡵 Electronic Speed Control . . . . . . . . . . . . . . . . 205 ▫ High/Low Beam Switch . . . . . . . . . . . . . . . 197 ▫ To Activate . . . . . . . . . . . . . . . . . . . . . . . . . 206 䡵 Windshield Wipers And Washers . . . . . . . . . . 198 ▫ To Set A Desired Speed . . . . . . . . . . . . . . . . 207 ▫ Windshield Wiper Operation . . . . . . . . . . . . 198 ▫ To Deactivate . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 ▫ To Cancel . . . . . . . . . . . . . . . . . . . . . . . . . . 215 䡵 Parksense威 Rear Park Assist — If Equipped . . . 237 ▫ To Turn Off . . . . . . . . . . . . . . . . . . . . . . . . 216 ▫ Parksense威 Sensors . . . . . . . . . . . . . . . . . . . 237 ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . 216 ▫ Parksense威 Warning Display . . . . . . . . . . . . 237 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . 217 ▫ Parksense威 Display . . .
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Turning Parkview威 On Or Off — Without Navigation/Multimedia Radio . . . . . . . . . . . 248 䡵 Overhead Console . . . . . . . . . . . . . . . . . . . . . 248 ▫ Front Map/Reading Lights . . . . . . . . . . . . . 248 ▫ Courtesy Lights . . . . . . . . . . . . . . . . . . . . . 249 ▫ Sunglass Bin Door . . . . . . . . . . . . . . . . . . . 250 䡵 Garage Door Opener — If Equipped . . . . . . . . 250 ▫ Before You Begin Programming HomeLink威 . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 ▫ Sunroof Fully Closed . . . . . . . . . . . . . . . . . . 262 䡵 Cargo Area Features . . . . . . . . . . . . . . . . . . . 279 䡵 Electrical Power Outlets . . . . . . . . . . . . . . . . . 263 ▫ Rechargeable Flashlight . . . . . . . . . . . . . . . . 279 䡵 Power Inverter — If Equipped . . . . . . . . . . . . 268 ▫ Cargo Storage . . . . . . . . . . . . . . . . . . . . . . . 280 䡵 Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . .
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. The mirror should be adjusted while set in the day position (toward the windshield). Headlight glare can be reduced by moving the small control lever under the mirror to the night position (lever flipped toward the rear of vehicle).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 in the button will illuminate to indicate when the dimming feature is activated. The mirror is twisted on the windshield button counterclockwise and requires no tools for mounting. NOTE: This feature is disabled when the vehicle is moving in reverse. CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror. Some vehicles will not have a convex passenger side mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster. Refer to “Rear Window Features” in “Understanding The Features Of Your Vehicle” for further information.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Tilt Mirrors in Reverse feature is not enabled when delivered from the factory. The Tilt Mirrors in Reverse feature can be enabled or disabled in the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)/ Customer- Programmable Features” in “Understanding Your Instrument Panel” for further information. Illuminated Vanity Mirrors To access an illuminated vanity mirror, flip down one of the visors.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 BLIND SPOT MONITORING — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radarbased sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones from the rear/front/side of the vehicle.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The BSM system detection zone DOES NOT change if your vehicle is towing a trailer. Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change. If the trailer or other object (i.e., bicycle, sports equipment) extends beyond the side of your vehicle, this may result in the BSM warning light remaining illuminated the entire time the vehicle is in a forward gear.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. 3 BSM Warning Light The BSM system monitors the detection zone from three different entry points (Side, Rear, Front) while driving to see if an alert is necessary. The BSM system will issue an alert during these types of zone entries.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Rear Vehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h). Overtaking Traffic If you pass another vehicle slowly (with a relative speed of less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. Opposing Traffic WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicyclists, or animals.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including radio muting.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Modes Of Operation Three selectable modes of operation are available in the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Blind Spot Alert Off When the BSM system is turned off there will be no visual or audible alerts from either the BSM or RCP systems. NOTE: The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth威 “Hands-Free Profile”, Version 0.96 or higher. See the Uconnect™ website for supported phones. NOTE: The BSM system will store the current operating For Uconnect™ customer support, visit the following mode when the vehicle is shut off.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Bluetooth威 technology - the global standard that enables different electronic devices to connect to each other without wires or a docking station, so Uconnect™ Phone works no matter where you stow your mobile phone (be it your purse, pocket, or briefcase), as long as your phone is turned on and has been paired to the vehicle’s Uconnect™ Phone. The Uconnect™ Phone allows up to seven mobile phones to be linked to the system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 The Uconnect™ Phone is fully integrated with the vehi- • For certain operations, compound commands can be cle’s audio system. The volume of the Uconnect™ Phone used. For example, instead of saying “Setup” and then can be adjusted either from the radio volume control “Pair a Device”, the following compound command knob or from the steering wheel radio control (right can be said: “Pair a Bluetooth威 Device”. switch), if so equipped.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say “Help” following the beep. The Uconnect™ Phone will play some of the options at any prompt if you ask for help. To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The Uconnect™ website may also provide detailed instructions for pairing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 • For identification purposes, you will be prompted to Dial By Saying A Number give the Uconnect™ Phone a name for your mobile button to begin. • Press the phone. Each mobile phone that is paired should be • After the “Ready” prompt and the following beep, say given a unique phone name. “Dial”.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system will prompt you to say the name of the • After the “Ready” prompt and the following beep, say person you want to call. “Phonebook New Entry”. • After the “Ready” prompt and the following beep, say • When prompted, say the name of the new entry. Use of the name of the person you want to call. For example, long names helps the Voice Command and it is recomyou can say “John Doe”, where John Doe is a previmended.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 The Uconnect™ Phone will allow you to enter up to 32 • Automatic download and update, if supported, begins names in the phonebook with each name having up to as soon as the Bluetooth威 wireless phone connection is four associated phone numbers and designations. Each made to the Uconnect™ Phone, for example, after you language has a separate 32-name phonebook accessible start the vehicle. only in that language.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • This downloaded phonebook cannot be edited or • Next, choose the number designation (home, work, deleted on the Uconnect™ Phone. These can only be mobile, or other) that you wish to edit. edited on the mobile phone. The changes are trans• When prompted, recite the new phone number for the ferred and updated to Uconnect™ Phone on the next phonebook entry that you are editing. phone connection.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • Press the button to begin. • Note that only the phonebook entry in the current language is deleted. • After the “Ready” prompt and the following beep, say • Automatic downloaded phonebook entries cannot be “Phonebook Delete”. deleted or edited. • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish Delete/Erase “All” Uconnect™ Phonebook Entries to delete.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Automatic downloaded phonebook entries cannot be • The selected number will be dialed. deleted or edited. Phone Call Features List All Names In The Uconnect™ Phonebook The following features can be accessed through the Uconnect™ Phone if the feature(s) are available on your button to begin. • Press the mobile service plan.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Answer Or Reject An Incoming Call — Call Currently In Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your button to place the current mobile phone. Press the call on hold and answer the incoming call. in progress. To go back to the first call, refer to “Toggling Between Calls” in this section.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Conference Call When two calls are in progress (one active and one on button until you hear a hold), press and hold the double beep indicating that the two calls have been joined into one conference call. Call Termination To end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Call Continuation Call continuation is the progression of a phone call on the Uconnect™ Phone after the vehicle ignition key has been switched to OFF. Call continuation functionality available on the vehicle can be any one of three types: Uconnect™ Phone Features Language Selection To change the language that the Uconnect™ Phone is using: • Press the button to begin.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Assistance If you are in an emergency and the mobile phone is reachable: Canada and 060 for Mexico). The number dialed may not be applicable with the available mobile service and area. • Pick up the phone and manually dial the emergency • If supported, this number may be programmable on button and say number for your area. some systems. To do this, press the “Setup”, followed by “Emergency”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Towing Assistance If you need towing assistance: Paging To learn how to page, refer to “Working with Automated Systems”. Paging works properly except for pagers of • Press the button to begin. certain companies, which time out a little too soon to • After the “Ready” prompt and the following beep, say work properly with the Uconnect™ Phone. “Towing Assistance”.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When calling a number with your Uconnect™ Phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can press the button and say the sequence you wish to enter, followed by the word “Send”. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can button and say, “3 7 4 6 # Send”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Turning Confirmation Prompts ON/OFF Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ Phone will not repeat a phone number before you dial it). Dialing Using The Mobile Phone Keypad You can dial a phone number with your mobile phone keypad and still use the Uconnect™ Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures).
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mute/Un-Mute (Mute OFF) When you mute the Uconnect™ Phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the Uconnect™ Phone: • Press the button. • Following the beep, say “Mute”. In order to un-mute the Uconnect™ Phone: • Press the button. • Following the beep, say “Mute off”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 • When prompted, say “List Phones”. • The selected phone will be used for the next phone call. If the selected phone is not available, the • The Uconnect™ Phone will play the phone names of Uconnect™ Phone will return to using the highest all paired mobile phones in order from the highest to priority phone present in or near (approximately the lowest priority. To “Select” or “Delete” a paired within 30 ft (9 m)) the vehicle.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Things You Should Know About Your Uconnect™ Phone Uconnect™ Phone Tutorial To hear a brief tutorial of the system features, press the button and say “Uconnect™ Tutorial.” You can either press the Uconnect™ Phone button to restore the factory setting or repeat the words and phrases when prompted by the Uconnect™ Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Voice Command • fully closed windows, • dry weather condition. • For best performance, adjust the rearview mirror to provide at least 1⁄2 in (1 cm) gap between the overhead • Even though the system is designed for users speaking console (if equipped) and the mirror. in North American English, French, and Spanish ac• Always wait for the beep before speaking. cents, the system may not always work for some.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • You can say “O” (letter “O”) for “0” (zero). • fully closed windows, • dry weather conditions, and • operation from the driver’s seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Send Messages: SMS Uconnect™ Phone can read or send new messages on You can send messages using Uconnect™ Phone. To send a new message: your phone. • Press the button. Read Messages: If you receive a new text message while your phone is • After the “Ready” prompt and the following beep, say connected to Uconnect™ Phone, an announcement will “SMS Send” or “Send Message.” be made to notify you that you have a new text message.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List of Preset Messages: 11. See You in 15 minutes 1. Yes 12. I am on my way 2. No 13. I’ll be late 3. Where are you? 14. Are you there yet? 4. I need more direction. 15. Where are we meeting? 5. L O L 16. Can this wait? 6. Why 17. Bye for now 7. I love you 18. When can we meet 8. Call me 19. Send number to call 9. Call me later 20. Start without me 10.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming messages. • Press the button. Bluetooth威 Communication Link Mobile phones have been found to lose connection to the Uconnect™ Phone. When this happens, the connection can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in Bluetooth威 ON mode.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 3
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 3
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary language list names list phones mobile mute mute off new entry no other pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winbutton, listen dows are closed, and the heater/air conditioning fan is options, press the Voice Command set to low. for the beep, and say your command. button while the Pressing the Voice Command system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM volume to a comfortable level while the Voice Command To switch to the AM band, say “AM” or “Radio AM”. In system is speaking. Please note the volume setting for this mode, you may say the following commands: Voice Command is different than the audio system.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Disc To switch to the disc mode, say “Disc”. In this mode, you may say the following commands: Satellite Radio • “Track” (#) (to change the track) To switch to satellite radio mode, say “Sat” or “Satellite Radio”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 − “Continue” (to continue recording) • “Switch to system setup” − “Delete” (to delete the recording) • “Change to setup” • “Play Memos” (to play previously recorded memos) • “Main menu setup” or — During the playback you may press the Voice • “Switch to setup” button to stop playing memos.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training For users experiencing difficulty with the system recognizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the rear of the seat switch, the seat will move in the direction of the switch.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining The Seatback The angle of the seatback can be adjusted forward or backward. Push the seatback switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Power Lumbar — If Equipped Vehicles equipped with power driver or passenger seats may be also be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Manual Front Passenger Seat Forward/Rearward Adjustment Some models may be equipped with a manual front passenger seat. The passenger seat can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar located under the seat cushion and move the seat forward or rearward. Release the bar once you have reached the desired position.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Front Passenger Seatback Adjustment — Recline To adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired position and release the lever. To return the seatback, lift the lever, lean forward and release the lever. WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 WARNING! Fold-Flat Passenger Seat • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time. • Do not place anything on the seat that insulates against heat, such as a blanket or cushion.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE during a remote start. Refer to “Remote Starting System NOTE: Once a heat setting is selected, heat will be felt — If Equipped” in “Things To Know Before Starting Your within two to five minutes. Vehicle” for further information. When the HIGH-level setting is selected, the heater will Front Heated Seats provide a boosted heat level during the first four minutes There are two heated seat switches that allow the driver of operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Press the switch once to select HIGH-level heating. Press the switch a second time to select LOW-level heating. Press the switch a third time to shut the heating elements OFF. NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. When the HIGH-level setting is selected, the heater will provide a boosted heat level during the first four minutes of operation. Then, the heat output will drop to the normal HIGH-level.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ventilated Seats — If Equipped On some models, both the driver and passenger seats are ventilated. Located in the seat cushion and seatback are small fans that draw the air from the passenger compartment and blow air through fine perforations in the seat cover to help keep the driver and front passenger cooler in higher ambient temperatures. There are two ventilated seat switches that allow the driver and passenger to operate the seats independently.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 WARNING! The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint. For comfort the Active Head Restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 • In the event of deployment of an Active Head Restraint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things To Know Before Starting Your Vehicle” for further information. WARNING! Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized dealer.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Active Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Restraint during sudden stops. Failure to follow this warning could cause personal injury if the Active Head Restraint is deployed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 WARNING! Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the outboard head restraints are in their upright positions when the seat is to be occupied. Press the power folding switch located on the instrument panel to fold the head restraints.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 60/40 Split Rear Seat — If Equipped Fold-Flat The second row seats can be folded flat to carry cargo. Pull upward on the release lever located on the outboard side of the seat. Fold-Flat Second Row Seat Easy Access For Third Row Either side of the rear seat can be tumbled forward to allow passengers to easily access the third row seats. 1. Pull upward on the release lever to release the seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 3 Release Lever 2. Tumble the seat forward using the pull strap located behind the seatback.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not drive the vehicle with the second row seats in the tumbled position. The second row seats are only intended to be tumbled for entry and exit to the third row seat. Failure to follow these instructions could result in personal injury. To Raise Rear Seat Tumbled the seat rearward and lock it into place. WARNING! Tumbled Second Row Be certain that the seatback is securely locked into position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Rear Captain Chairs — If Equipped Fold-Flat The second row seats can be folded flat to carry cargo. Pull upward on the release lever located on the outboard side of the seat.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Tumble the seat forward using the pull strap located Easy Access For Third Row Either captains chair can be tumbled forward to allow behind the seatback. passengers to easily access the third row seats. 1. Pull upward on the release lever to release the seat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 WARNING! Do not drive the vehicle with the second row seats in the tumbled position. The second row seats are only intended to be tumbled for entry and exit to the third row seat. Failure to follow these instructions could result in personal injury. 3 3. If your vehicle is equipped with a mini console there is a stepping pad to allow passengers to easily access the third row seats.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Raise Rear Seat Tumbled the seat rearward and lock it into place. WARNING! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. Folding Third Row Both third row seats can be folded forward to increase the cargo area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 NOTE: The second row seats must be in their full upright position, or tumbled when folding the third row seats. To raise the seat, pull the seat toward you using the strap located on the back of the seat. WARNING! Third Row Folded Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED Once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat, driver’s outside mirror, adjustable steering wheel position (if equipped), and the radio station preset settings. Your Remote Keyless Entry (RKE) transmitters can also be programmed to recall the same positions when the UNLOCK button is pressed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory 5. Turn on the radio and set the radio station presets (up to 12 AM and 12 FM stations can be set). NOTE: Each time the S (SET) button and a numbered 6. Turn the ignition switch to the LOCK/OFF position button 1 or 2 are pressed, you erase the memory settings and remove the key. for that button and store a new one. 7. Press and release the S (SET) button located on the 1.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE to “Electronic Vehicle Information Center (EVIC)/ To recall the memory setting for driver two, press Customer-Programmable Features” in “Understanding MEMORY button number 2 on the driver’s door, or the UNLOCK button on the RKE transmitter linked to Your Instrument Panel” for further information. memory position 2. 12.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 3. Press and release the memory S (SET) button located Easy Entry/Exit Seat This feature provides automatic driver’s seat positioning on the driver’s door. which will enhance driver mobility out of and into the 4. Within five seconds, press and release MEMORY vehicle. button 1 on the driver’s door. There are two possible Easy Entry/Exit adjustments 5. Within five seconds, press and release the UNLOCK available: button on the RKE transmitter.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE driving position when the key is placed into the TO OPEN AND CLOSE THE HOOD ignition, and turned out of the LOCK position toward To open the hood, two latches must be released. the ACC/ON position. 1. Pull the release lever located below the instrument The Easy Entry/Exit feature will be automatically dis- panel and in front of the driver’s door. abled if the seat is already positioned closer than 0.9 in (23 mm) forward of the rear stop.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 2. Reach under the hood from outside the vehicle, move the safety latch to the left and lift the hood. CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. 3 WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn on the headlights, rotate the headlight LIGHTS switch clockwise. When the headlight switch is Headlight Switch on the parking lights, taillights, license plate The headlight switch is located on the left side of the light and instrument panel lights are also instrument panel, next to the steering wheel. The headturned on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 Headlights On Automatically With Wipers If your vehicle is equipped with Automatic Headlights, it Do not use abrasive cleaning components, solvents, also has this customer-programmable feature. When steel wool or other abrasive materials to clean the your headlights are in the automatic mode and the engine is running, they will automatically turn on when lenses. the wiper system is on.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: When your headlights come on during the To Activate daytime, the instrument panel lights will automatically 1. Enable the Automatic High Beams. Refer to “Elecdim to the lower nighttime intensity. Refer to “Lights” in tronic Vehicle Information Center (EVIC)/Customerthis section for further information. Programmable Features” in “Understanding Your InstruSmartBeam™ — If Equipped ment Panel” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 2. Push back on the multifunction lever once again to Headlight Delay To aid in your exit, your vehicle is equipped with a reactivate the system. headlight delay that will leave the headlights on for NOTE: Broken, muddy, or obstructed headlights and approximately 90 seconds.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights — If Equipped The fog lights are turned on by rotating the headlight switch to the parking light or headlight position and pushing in the headlight rotary control. Fog Light Operation The fog lights will operate only when the parking lights are on or when the vehicle headlights are on low beam. An indicator light located in the instrument cluster will illuminate when the fog lights are on.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 The brightness of the instrument panel lighting can be regulated by rotating the dimmer control up (brighter) or down (dimmer). When the headlights are on you can supplement the brightness of the odometer, trip odometer, radio, overhead console, rear full center console cubby bin (if equipped) and lighted cupholders (if equipped) by rotating the control to its farthest position up until you hear a click.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Battery saver mode is cancelled if the ignition is Lights-On Reminder If the headlights, parking lights, or cargo lights are left on ON. after the ignition is turned OFF, a chime will sound when Front Map/Reading Lights the driver’s door is opened. The front map/reading lights are mounted in the overBattery Saver head console. To protect the life of your vehicle’s battery, load shedding is provided for both the interior and exterior lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Each light can be turned on by pressing a switch on either side of the console. These buttons are backlit for night time visibility. To turn the lights off, press the switch a second time. The lights will also turn on when the UNLOCK button on the Remote Keyless Entry (RKE) is pressed. Courtesy Lights The courtesy lights can be turned on by pressing the top corner of the lens. To turn the lights off, press the lens a second time.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ambient Light Multifunction Lever The overhead console is equipped with an ambient light The multifunction lever is located on the left side of the feature. This light casts illumination for improved visibil- steering column. ity of the floor center console and PRNDL area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer control lever is located on the left side of the steering column. The front wipers are operated by rotating a switch, located on the end of the lever. For information on the rear wiper/washer, refer to “Rear Window Features” in “Understanding The Features Of Your Vehicle”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 CAUTION! Always remove any buildup of snow that prevents the windshield wiper blades from returning to the “park” position. If the windshield wiper switch is turned off, and the blades cannot return to the “park” position, damage to the wiper motor may occur. Intermittent Wiper System Use one of the four intermittent wiper settings when weather conditions make a single wiping cycle, with a variable delay between cycles, desirable.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the end of the lever is pushed while the wipers are in Windshield Washer Operation To use the washer, push on the end of the lever (toward the off position, the wipers will operate for several wipe the steering wheel) and hold while spray is desired. If the cycles, then turn off.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to spray the windshield with washer fluid. Rain Sensing Wipers — If Equipped This feature senses moisture on the windshield and automatically activates the wipers for the driver. The feature is especially useful for road splash or overspray from the windshield washers of the vehicle ahead.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Rain Sensing feature may not function properly • Transmission In NEUTRAL Position — When the when ice, or dried salt water is present on the windshield. ignition is ON, and the transmission is in the NEUTRAL position, the Rain Sensing system will not • Use of Rain-X威 or products containing wax or silicone operate until the wiper switch is moved, vehicle speed may reduce Rain Sensing performance.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your vehicle. Failure to follow this warning may result in serious injury or death. POWER TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmitter or the memory switch on the driver’s door trim panel to return the tilt/telescopic steering column to pre-programmed positions. Refer to “Driver Memory Seat” in this section for further information. WARNING! Do not adjust the steering column while driving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Press the switch to turn on the heated steering wheel. The light on the switch will illuminate to indicate the steering wheel heater is on. Pressing the switch a second time will turn off the heated steering wheel and light indicator. NOTE: The engine must be running for the heated steering wheel to operate.
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Electronic Speed Control buttons are located on the the same time. If this occurs, the Electronic Speed Control right side of the steering wheel. System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. To Activate Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 To Set A Desired Speed Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed. To Vary The Speed Setting When the Electronic Speed Control is set, you can increase speed by pushing the RES (+) button.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Accelerate For Passing Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Using Electronic Speed Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. WARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 NOTE: • If the sensor does not detect a vehicle ahead of you, ACC will maintain a fixed set speed. • If the ACC sensor detects a vehicle ahead, ACC will apply limited braking or acceleration (not to exceed the original set speed) automatically to maintain a preset following distance, while matching the speed of the vehicle ahead. WARNING! • Adaptive Cruise Control (ACC) is a convenience system. It is not a substitute for active driving involvement.
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) WARNING! − Cannot take street, traffic, and weather conditions into account, and may be limited upon adverse sight distance conditions. − Does not predict the lane curvature or the movement of preceding vehicles and will not compensate for such changes. − Does not always fully recognize complex driving conditions, which can result in wrong or missing distance warnings.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 The Cruise Control system has two control modes: • Adaptive Cruise Control mode for maintaining an appropriate distance between vehicles. • Normal (fixed speed) cruise control mode for cruising at a constant preset speed. For additional information, refer to “Normal (Fixed Speed) Cruise Control Mode” in this section. 3 NOTE: The system will not react to preceding vehicles. Always be aware of the mode selected.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Any chassis/suspension modifications to the • When the parking brake is set. vehicle will effect the performance of the Adaptive Cruise • When the automatic transmission is in PARK, REControl. VERSE or NEUTRAL. Activating Adaptive Cruise Control (ACC) • When pushing the RES + button without a previously You can only activate ACC if the vehicle speed is above set speed in memory. 20 mph (32 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 To turn the system OFF, push and release the ON/OFF button again. At this time, the system will turn off and the EVIC will display “Adaptive Cruise Control Off.” WARNING! Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have a collision. Always leave the system off when you are not using it.
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Remove your foot from the accelerator pedal. If you do To Set A Desired ACC Speed When the vehicle reaches the speed desired, push the not, the vehicle may continue to accelerate beyond the set SET - button and release. The EVIC will display the set speed. If this occurs: speed. • The message “DRIVER OVERRIDE” will display in the EVIC. • The system will not be controlling the distance between your vehicle and the vehicle ahead.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 To Cancel The system will disable ACC without erasing the memory if: • You softly tap the brake pedal. • You depress the brake pedal. • You press the CANCEL switch. • An Anti-Lock Brake System (ABS) event occurs. • A Trailer Sway Control (TSC) event occurs. • If the transmission is shifted into NEUTRAL. Driver Override • The Electronic Stability Control/Traction Control System (ESC/TCS) activates.
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If ACC is resumed or set with the ESC/TCS off, • You turn OFF the ignition. ESC will automatically be re-engaged. • You switch to Four-Wheel Drive Low. To Resume Speed Press the RES + button and release. Then remove your foot from the accelerator pedal. The EVIC will display the last set speed. NOTE: You can resume ACC from a minimum of 20 mph (32 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 To Vary The Speed Setting While ACC is set, you can increase the set speed by pressing and holding the RES + button. If the button is continually pressed, the set speed will continue to increase in 5 mph (8 km/h) increments until the button is released. The increase in set speed is reflected in the EVIC display. Pressing the SET - button once will result in a 1 mph (1.6 km/h) decrease in set speed.
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting The Following Distance In ACC The specified following distance for ACC can be set by varying the distance setting between 3 (long), 2 (medium), and 1 (short). Using this distance setting and the vehicle speed, ACC calculates and sets the distance to the vehicle ahead. This distance setting displays in the EVIC.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 same lane, the EVIC displays the “Sensed Vehicle Indicator” icon, and the system adjusts vehicle speed automatically to maintain the distance setting, regardless of the set speed. The vehicle will then maintain the set distance until: • The vehicle ahead accelerates to a speed above the set speed. • The vehicle ahead moves out of your lane or view of the sensor.
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The maximum braking applied by ACC is limited; how- The ACC Systems provides Overtake Aid when passing ever, the driver can always apply the brakes manually, if on the left hand side only. When driving with ACC engaged and following a Target vehicle, the system will necessary. provide an additional acceleration based on your current NOTE: The brake lights will illuminate whenever the speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 ACC SET Adaptive Cruise Control (ACC) Menu The EVIC displays the current ACC system settings. The − When ACC is set, the set speed will display. EVIC is located in the upper part of the instrument The set speed will continue to display in place of the cluster between the speedometer and the tachometer. The information it displays depends on ACC system status. odometer reading when changing the EVIC display while ACC is set.
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ACC screen will display once again if any ACC Display Warnings And Maintenance activity occurs, which may include any of the following: “Clean Radar Sensor In Front Of Vehicle” Warning • Set Speed Change The ACC “Clean Radar Sensor In Front Of Vehicle” warning will display when conditions temporarily limit • Distance Setting Change system performance. This most often occurs at times of • System Cancel poor visibility, such as in snow or heavy rain.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 If weather conditions are not a factor, the driver should examine the sensor. It may require cleaning or removal of an obstruction. The sensor is located in the center of the vehicle behind the lower grille. To keep the ACC System operating properly, it is important to note the following maintenance items: • Always keep the sensor clean. Carefully wipe the sensor lens with a soft cloth. Be cautious not to damage the sensor lens.
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Do not attach or install any accessories near the sensor, including transparent material or aftermarket grilles. Doing so could cause an ACC system failure or malfunction. ACC Unavailable Warning If the system turns off, and the EVIC displays “ACC/ FCW Unavailable, Vehicle System Error”, there may be a temporary malfunction that limits ACC functionality.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 Precautions While Driving With ACC In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpectedly. The driver needs to stay alert and may need to intervene. Adding A Trailer Hitch The weight of a trailer/hitch may affect the performance of ACC.
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Offset Driving ACC may not detect a vehicle in the same lane that is offset from your direct line of travel. There will not be sufficient distance to the vehicle ahead. The offset vehicle may move in and out of the line of travel, which can cause your vehicle to brake or accelerate unexpectedly.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 ACC may occasionally provide braking and/or a driver alert that you consider unnecessary. This may be the systems response to signs, guardrails, and other stationary objects in a curve. This may also occur at the base of steep hills. This is normal operation and your vehicle does not require service. Using ACC On Hills When driving on hills, ACC may not detect a vehicle in your lane.
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Changing ACC will not detect a vehicle until it is completely in the lane in which you are traveling. In the illustration shown, ACC has not yet detected the vehicle changing lanes and it may not detect the vehicle until it’s too late for the ACC system to take action. ACC will not detect a vehicle until it is completely in the lane. There will not be sufficient distance to the lane-changing vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 3 Stationary Objects And Vehicles General Information ACC does not react to stationary objects and stationary FCC Requirements For Vehicular Radar Systems vehicles. For example, ACC will not react in situations Classification Specifications: where the vehicle you are following exits your lane and 47 C.F.R. Part 15 the vehicle ahead is stopped in your lane. Always be 47 C.F.R Part 15.515 attentive and ready to apply the brakes if necessary.
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Normal (Fixed Speed) Cruise Control Mode In addition to Adaptive Cruise Control mode, a normal (fixed speed) Cruise Control mode is available for cruising at fixed speeds. The normal Cruise Control mode is designed to maintain a set cruising speed without requiring the driver to operate the accelerator. Cruise Control can only be operated if the vehicle speed is above 20 mph (32 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 To Vary The Speed Setting There are two ways to change the set speed: To Resume Press the RES + button and then remove your foot from the accelerator pedal. The EVIC will display the last set • Use the accelerator pedal to adjust the vehicle to the speed. desired speed and press the SET - button. To Turn Off • Tap the RES + or SET - button to increase or decrease The system will turn off and erase the set speed in the set speed in 1 mph (1.
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Forward Collision Warning — If Equipped Forward Collision Warning (FCW) warns the driver of a potential collision with the vehicle in front of you and prompts the driver to take action in order to avoid the collision. When entering or driving in a curve, the FCW alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the course prediction. This is expected and is a part of normal FCW activation and functionality.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 NOTE: Changing FCW Status • The minimum speed for FCW activation is 10 mph The FCW feature can be set to far, set to near or turned off (16 km/h). in the Electronic Vehicle Information Center (EVIC) refer to “Electronic Vehicle Information Center (EVIC)” in • When entering or driving in a curve, the FCW alerts “Understanding Your Instrument Panel” for further inmay be triggered on objects other than vehicles such as formation.
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The default status of FCW is the “Far” setting, this allows the system to warn you of a possible collision with the vehicle in front of you when you are farther away. This gives you the most reaction time. Changing the FCW status to the “Near” setting, allows the system to warn you of a possible collision with the vehicle in front of you when you are much closer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in front of you. 3 FCW Off Example Example Only NOTE: In the “Off” setting FCW OFF will be displayed in the EVIC. NOTE: • The system will retain the last setting selected by the driver after ignition shut down.
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • FCW will not react to irrelevant objects such as overhead objects, ground reflections, objects not in the path of the car, stationary objects that are far away, oncoming traffic, or leading vehicles with the same or higher rate of speed. • FCW will be disabled like ACC below with the unavailable screens. Service FCW Warning If the system turns off, and the EVIC displays “ACC Unavailable Service Radar Sensor”, it indicates there is an internal system fault.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 PARKSENSE姞 REAR PARK ASSIST — IF EQUIPPED The ParkSense威 Rear Park Assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.g. during a parking maneuver. Refer to ParkSense威 System Usage Precautions for limitations of this system and recommendations.
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ParkSense威 Warning Display is located in the Instru- ParkSense姞 Display ment cluster’s EVIC display. It provides both visual and When the vehicle is in REVERSE, the warning display audible warnings to indicate the distance between the will turn ON indicating the system status. rear fascia/bumper and the detected obstacle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 3 Park Assist System OFF The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fast Tone Continuous Tone The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 Rear Distance (in/cm) Audible Alert Chime Display Message Greater than 79 in (200 cm) None Arcs Park Assist System ON None Radio Mute No WARNING ALERTS 79-39 in 39-25 in (200-100 cm) (100-65 cm) Single 1/2 Slow Second Tone Warning Object Warning Object Detected Detected 3 Solid 3 Slow (Continuous) Flashing Yes Yes NOTE: ParkSense威 will MUTE the radio, if on, when the system is sounding an audio tone.
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further information. When the shift lever is moved to REVERSE and the system is disabled, the EVIC will display the “PARK ASSIST SYSTEM OFF” message for as long as the vehicle is in REVERSE. detected a faulted condition, the EVIC will display the “CLEAN PARK ASSIST SENSORS” or the “SERVICE PARK ASSIST SYSTEM” message for as long as the vehicle is in REVERSE.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 ParkSense姞 System Usage Precautions • ParkSense威, when on, will MUTE the radio when it is sounding a tone. NOTE: • Ensure that the rear bumper is free of snow, ice, mud, • Clean the ParkSense威 sensors regularly, taking care dirt and debris to keep the ParkSense威 system operatnot to scratch or damage them. The sensors must not ing properly. be covered with ice, snow, slush, mud, dirt or debris.
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • On vehicles equipped with a tailgate, ParkSense威 should be disabled when the tailgate is in the lowered or open position and the vehicle is in REVERSE. A lowered tailgate could provide a false indication that an obstacle is behind the vehicle. CAUTION! • ParkSense威 is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 WARNING! (Continued) • Before using the ParkSense威 Rear Park Assist System, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles because the hitch ball will be much closer to the obstacle than the rear fascia when the warning display turns on the single flashing arc and sounds the continuous tone.
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When displayed, static grid lines will illustrate the width that will help indicate the distance to the rear of the of the vehicle while a dashed center-line will indicate the vehicle. The following table shows the approximate center of the vehicle to assist with aligning to a hitch/ distances for each zone: receiver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 WARNING! CAUTION! (Continued) Drivers must be careful when backing up even when using the ParkView威 Rear Back Up Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death.
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Enable or disable the rear camera feature by selecting the “enable rear camera in reverse” soft-key. 5. Press the “save” soft-key. Turning ParkView姞 On Or Off — Without Navigation/Multimedia Radio 1. Press the “menu” hard-key. 2. Select “system setup” soft-key. 3. Enable or disable the rear camera feature by selecting “enable rear camera in reverse” soft-key and pressing the “save” soft-key.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 Courtesy Lights The courtesy lights can be turned on by pressing the top corner of the lens. To turn the lights off, press the lens a second time. 3 Front Map/Reading Lights To turn the lights off, press the switch a second time. The lights also turn on when a door is opened. The lights will also turn on when the UNLOCK button on the RKE is pressed.
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunglass Bin Door At the front of the console a compartment is provided for the storage of a pair of sunglasses. The storage compartment access is a “push/push” design. Push the chrome pad on the door to open. Push the chrome pad on the door to close. GARAGE DOOR OPENER — IF EQUIPPED HomeLink威 replaces up to three hand-held transmitters that operate devices such as garage door openers, motorized gates, lighting or home security systems.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 3 HomeLink威 Buttons/Overhead Consoles HomeLink威 Buttons/Sunvisor/Headliner NOTE: HomeLink威 is disabled when the Vehicle Security Alarm is active.
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Before You Begin Programming HomeLink姞 Be sure that your vehicle is parked outside of the garage • Erasing all channels should only be performed when before you begin programming. programming HomeLink威 for the first time. Do not erase channels when programming additional buttons.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 3. Simultaneously press and hold both the Homelink威 button you want to program and the hand-held transmitter button. 4. Continue to hold both buttons and observe the indicator light. The Homelink威 indicator will flash slowly and then rapidly after Homelink威 has received the frequency signal from the hand-held transmitter. Release both buttons after the indicator light changes from slow to rapid. 5.
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: You have 30 seconds in which to initiate the next 2. Press and hold the desired HomeLink威 button until the indicator light begins to flash after 20 seconds. Do not step after the LEARN button has been pressed. release the button. 6. Return to the vehicle and press the programmed HomeLink威 button twice (holding the button for two 3. Without releasing the button proceed with “Programseconds each time).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 4. Continue to hold both buttons and observe the indicator light. The Homelink威 indicator will flash slowly and then rapidly after Homelink威 has received the frequency signal from the hand-held transmitter. Release both buttons after the indicator light changes from slow to rapid. Reprogramming A Single HomeLink威 Button To reprogram a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the ON/RUN position. 2.
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE to pick up the signal during programming. Similar to this 4. Watch for the HomeLink威 indicator to change flash Canadian law, some U.S. gate operators are designed to rates. When it changes, it is programmed. It may take up time-out in the same manner. to 30 seconds or longer in rare cases. The garage door may open and close while you are programming.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 Reprogramming A Single HomeLink威 Button Security To reprogram a channel that has been previously trained, It is advised to erase all channels before you sell or turn follow these steps: in your vehicle. 1. Turn the ignition switch to the ON/RUN position. To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. Note that all 2. Press and hold the desired HomeLink威 button until channels will be erased.
258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Troubleshooting Tips If you are having trouble programming HomeLink威, here are some of the most common solutions: • Replace the battery in the original hand-held transmitter. • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. • Did you unplug the device for programming and remember to plug it back in? If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located between the sun Canada RSS-210. Operation is subject to the following visors on the overhead console. two conditions: 1. This device may not cause harmful interference. 3 2. This device must accept any interference that may be received including interference that may cause undesired operation.
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In a collision, there is a greater risk of being thrown from a vehicle with an open sunroof. You could also be seriously injured or killed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 position. The sunroof will close fully and stop automatically. This is called “Express Close”. During Express Close operation, any movement of the switch will stop the sunroof. NOTE: If three consecutive sunroof close attempts result in Pinch Protect reversals, the fourth close attempt will be a Manual Close movement with Pinch Protect disabled. Closing Sunroof — Manual Mode To close the sunroof, press and hold the switch in the forward position.
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) is in certain open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, open the front and rear windows together to minimize the buffeting.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 ELECTRICAL POWER OUTLETS • To ensure proper operation a MOPAR威 knob and Your vehicle is equipped with 12 Volt (13 Amp) power element must be used. outlets that can be used to power cellular phones, small • Do not exceed the maximum power of 160 Watts electronics and other low powered electrical accessories. (13 Amps) at 12 Volts.
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The front power outlet is located inside the storage area on the center stack of the instrument panel. Front Center Console Outlet If your vehicle is equipped with a rear full center console, there is also a power outlet located in the lower storage Front Power Outlet In addition to the front power outlet, there is also a power area of the rear full center console. outlet located in the lower storage area of the front center console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 3 Rear Full Center Console Outlet The rear cargo power outlet is located in the right rear cargo area.
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The rear cargo power outlet can be switched to “battery” powered all the time by switching the power outlet right rear quarter panel fuse in the fuse panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 WARNING! CAUTION! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED There is a 115 Volt, 150 Watt inverter outlet located on the back of the center console to convert DC current to AC current. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts. Certain high-end video games, such as Playstation3 and XBox360 will exceed this power limit, as will most power tools.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 The power inverter is designed with built-in overload protection. If the power rating of 150 Watts is exceeded, the power inverter will automatically shut down. Once the electrical device has been removed from the outlet the inverter should automatically reset. If the power rating exceeds approximately 170 Watts, the power inverter may have to be reset manually. To reset the inverter manually press the power inverter button OFF and ON.
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Rear Cupholders Front Seat Cupholders Rear Center Arm Rest Cupholders — If Equipped There are two cupholders for the front seat passengers There are two cupholders for the rear seat passengers located in the center console. located in the fold-down center armrest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 The rear full console cupholders are equipped with a Rear Full Console Cupholders — If Equipped There are two cupholders for the rear seat passengers light ring that illuminates the cupholders for the rear located in the front of the rear full console. passengers. The light ring is controlled by the Dimmer Control. Refer to “Lights” in “Understanding The Features Of Your Vehicle” for further information.
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Mini Console Cupholders — If Equipped STORAGE There are two cupholders for the rear seat passengers Glove Compartment located in the front of the rear mini console. The glove compartment is located on the right side of the instrument panel. Rear Mini Console Cupholders Glove Compartment To open the glove compartment, pull outward on the latch and lower the glove box door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 Door Storage Front Center Console Large storage areas are built into the door panels for easy The front center console contains both an upper and a access. lower storage area.
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper storage compartment, pull upward on Lift upward on the larger of the latches to access the the small latch located on the lid. lower storage compartment.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 Rear Full Center Console (If Equipped) The rear full center console contains both an upper and a lower storage area. 3 Upper Storage Compartment Lift upward on the larger of the latches to access the lower storage compartment. Storage Compartment To open the upper storage compartment, pull upward on the small latch located on the front of the lid.
276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Lower storage compartment light is always on The upper storage compartment may also be lifted forwith ignition in the ON/RUN position. ward. Push in the release button located on the back of the lid. CAUTION! Remove any items stored in the console cupholders or devices with cords routing through upper storage area. Damage may occur to upper console lid and device cables when upper storage compartment is lifted forward.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 3 Storage Compartment Rear Push Button When lifted forward there is access to the lower storage compartment.
278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Open storage areas, or cubby bins with removable liners, Rear Mini Center Console (If Equipped) are located rearward of the cupholders and in the lower An open storage area, or cubby bin with removable liner, is located in the front of the console. front of the console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 CARGO AREA FEATURES Rechargeable Flashlight The rechargeable flashlight is mounted on the left side of the cargo area. The flashlight snaps out of the bezel when needed. The flashlight features two bright LED light bulbs and is powered by rechargeable lithium batteries that recharge when snapped back into place. 3 Press in on the flashlight to release it.
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To operate the flashlight, press the switch once for high, Cargo Storage There is a removable storage bin located on the left side twice for low, and a third time to return to off. of the rear cargo area. Additional storage can be found in the load floor. To access the lower storage, lift the handle and raise the storage lid. Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy, not to secure loads.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 3. The liftgate may be opened with the cargo cover in place. WARNING! In a collision, a loose cargo cover in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compartment. Remove the cover from the vehicle when taken from its mounting. Do not store it in the vehicle.
282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) REAR WINDOW FEATURES • Do not carry loads which exceed the load limits described on the label attached to the left door or left door center pillar. • Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • Place as much cargo as possible in front of the rear axle. Too much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 Rotate the center portion of the lever upward to the If the rear wiper is operating when the ignition is turned first detent for intermittent operation and to the OFF, the wiper will automatically return to the “park” position. second detent for continuous rear wiper operation. Rotating the center portion upward once more will activate the washer pump which will continue to operate as long as the switch is held.
284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 Deploying the Crossbars Starting with one crossbar, completely loosen the thumb screws at both ends of the crossbar. 3 1 — Side Rail 2 — Crossbar The roof rack does not increase the total load carrying Thumb Screw capacity of the vehicle. Be sure the total load of cargo inside the vehicle plus that on the external rack does not NOTE: The thumb screws cannot be fully removed. exceed the maximum vehicle load capacity.
286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Remove the crossbar from the stowed position by sliding the crossbar towards the center of the roof. Repeat with crossbar on the opposite side. CAUTION! Be careful when handling the crossbars to prevent damage to the vehicle. Starting with one crossbar, bend down the pivot supports at each end.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 Position the crossbars across the roof making sure the Slide the cross bar into to the deploy position by moving letters on the crossbars align with the matching letters on it towards the matching letter in the side rail. Be sure the the side rail. crossbar is fully deployed with the crossbar pushed as far into the slot as possible. Once the crossbar is in place, tighten both thumb screws completely.
288 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Deploy and tighten the second crossbar to complete the Stowing the Crossbars Starting with one crossbar, completely loosen the thumb deployment of the crossbars. screws at both ends. Slide the crossbar away from the matching letter to remove it from the deployed position. Repeat with the other crossbar. CAUTION! Be careful when handling the crossbars to prevent damage to the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 Starting with the one crossbar, bend up the pivot sup- Then, position the crossbar along the correct side rail. ports at each end. Make sure the letters on the crossbar align with the matching letters on the side rail.
290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Slide the crossbar outward, away from the center of the roof. The crossbar will nest fully within the side rail. Tightening Crossbar Crossbar to Side Rail Once the driver’s side crossbar is in place, tighten the thumb screws completely. Repeat the procedure to stow the second crossbar on the opposite side.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 CAUTION! Stowed Crossbars NOTE: • To help control wind noise, stow the crossbars in the side rails when they are not in use. • If any metallic object is placed over the satellite radio antenna (if equipped), you may experience interruption of satellite radio reception. • To prevent damage to the roof of your vehicle, DO NOT carry any loads on the roof rack without the crossbars deployed.
292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) CAUTION! (Continued) • Load should always be secured to cross bars first, with tie down loops used as additional securing points if needed. Tie loops are intended as supplementary tie down points only. Do not use ratcheting mechanisms with the tie loops. Check the straps and thumbwheels frequently to be sure that the load remains securely attached.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 297 ▫ Engine Oil Change Indicator System . . . . . . . 322 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . 298 ▫ Fuel Economy . . . . . . . . . . . . . . . . . . . . . . 323 䡵 Instrument Cluster Descriptions . . . . . . . . . . . 299 ▫ Vehicle Speed . . . . . . . . . . . . . . . . . . . . . . . 325 䡵 Electronic Vehicle Information Center (EVIC) . . 309 ▫ Trip Info . . . . . . . . . . .
294 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Turn Menu Off . . . . . . . . . . . . . . . . . . . . . . 327 ▫ Compass / Temperature Display . . . . . . . . . 327 ▫ Customer-Programmable Features (System Setup) . . . . . . . . . . . . . . . . . . . . . . 330 ▫ System Status . . . . . . . . . . . . . . . . . . . . . . . 338 䡵 Media Center 730N/430/430N (RHR/RER/ RBZ/RHB) CD/DVD/HDD/NAV — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 295 ▫ Operating Instructions (Uconnect™ Phone) — If Equipped . . . . . . . . . . . . . . . . . . . . . . 364 䡵 iPod威/USB/MP3 Control — If Equipped . . . . . 364 ▫ Connecting The iPod威 Or External USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365 ▫ Single Video Screen . . . . . . . . . . . . . . . . . . . 373 ▫ Play Video Games . . . . . . . . . . . . . . . . . . . . 376 ▫ Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1 .
296 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Replacing The Batteries . . . . . . . . . . . . . . . . 390 䡵 Radio Operation And Mobile Phones ▫ Unwired威 Stereo Headphone Lifetime Limited Warranty . . . . . . . . . . . . . . . . . . . . 390 䡵 Climate Controls . . . . . . . . . . . . . . . . . . . . . . 408 . . . . . . . 408 ▫ System Information . . . . . . . . . . . . . . . . . . . 392 ▫ Dual-Zone Automatic Temperature Control (ATC) — If Equipped . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 297 INSTRUMENT PANEL FEATURES 4 1 2 3 4 5 — Air Outlet — Instrument Cluster — Radio — Glove Compartment — Climate Controls 6 — Lower Switch Bank 7 — Hazard Switch 8 — Storage Bin 9 — ESC Off Switch 10 — Ignition Switch 11 — Headlight Switch 12 — Hood Release 13 — Fuel Door Release 14 — Dimmer Control
298 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER
UNDERSTANDING YOUR INSTRUMENT PANEL 299 INSTRUMENT CLUSTER DESCRIPTIONS 1. Tachometer Indicates the engine speed in revolutions per minute (RPM x 1000). As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.
300 UNDERSTANDING YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a TPMS CAUTION! malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is The TPMS has been optimized for the original combined with the low tire pressure telltale. When the equipment tires and wheels.
UNDERSTANDING YOUR INSTRUMENT PANEL 301 does not come on when turning the key from OFF to ON/RUN, have the condition checked promptly. WARNING! Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the light after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing.
302 UNDERSTANDING YOUR INSTRUMENT PANEL system. If this light remains on after several ignition 5. Electronic Stability Control (ESC) OFF Indicator cycles, and the vehicle has been driven several miles Light — If Equipped This light indicates the Electronic Stability Con(kilometers) at speeds greater than 30 mph (48 km/h), see trol (ESC) is off. your authorized dealer as soon as possible to have the problem diagnosed and corrected. NOTE: 6.
UNDERSTANDING YOUR INSTRUMENT PANEL 303 brakes. If the ABS light does not turn on when the 10. High Beam Indicator ignition switch is turned to the ON/RUN position, have This light indicates that the headlights are on high beam. Pull the turn signal lever toward the steerthe light inspected by an authorized dealer. ing wheel to switch the headlights to low beam. 7. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog 11.
304 UNDERSTANDING YOUR INSTRUMENT PANEL as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/ service, so that you can be sure that it is properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero. 14.
UNDERSTANDING YOUR INSTRUMENT PANEL 305 20. Electronic Vehicle Information Center (EVIC) 17. Fuel Door Reminder The fuel pump symbol points to the side of the Amber Telltale Area This area will display the EVIC reconfigurable amber vehicle where the fuel door is located. caution telltales. For further information, refer to “Electronic vehicle Information Center (EVIC)”. 18. Fuel Gauge 21.
306 UNDERSTANDING YOUR INSTRUMENT PANEL indicate that the parking brake is applied, that the brake indicated by the Brake Warning Light, which will turn on fluid level is low, or that there is a problem with the when the brake fluid level in the master cylinder has dropped below a specified level. anti-lock brake system reservoir.
UNDERSTANDING YOUR INSTRUMENT PANEL 307 Vehicles equipped with the Anti-Lock Brake System 23. TOW/HAUL (ABS), are also equipped with Electronic Brake Force The TOW HAUL button is located on the center stack upper switch bank. This light will Distribution (EBD). In the event of an EBD failure, the illuminate when TOW HAUL mode is selected Brake Warning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. 24.
308 UNDERSTANDING YOUR INSTRUMENT PANEL 25. Temperature Gauge The temperature gauge shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range.
UNDERSTANDING YOUR INSTRUMENT PANEL 309 The EVIC consists of the following: ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) • System Status The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the • Vehicle Information Warning Message Displays instrument cluster.
310 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by UP Button pressing the following buttons mounted on the steering Press and release the UP button to scroll upwheel: ward through the main menus (Fuel Economy, ACC (if equipped), Vehicle Speed, Trip Info, Tire PSI, Vehicle Info, Messages, Units, System Setup, Turn Menu Off) and sub-menus. DOWN Button Press and release the DOWN button to scroll downward through the main menus and submenus.
UNDERSTANDING YOUR INSTRUMENT PANEL 311 messages that consist of approximately 60 possible warnBACK Button Press the BACK button to scroll back to a ing or information messages. These pop up messages fall into several categories: previous menu or sub-menu. • Five Second Stored Messages When the appropriate conditions occur, this type of Electronic Vehicle Information Center (EVIC) message takes control of the main display area for five Displays seconds and then returns to the previous screen.
312 UNDERSTANDING YOUR INSTRUMENT PANEL of this message type are ⬙Turn Signal On⬙ (if a turn signal When the appropriate conditions exist, the EVIC displays is left on) and ⬙Lights On⬙ (if driver leaves the vehicle). the following messages: • Unstored Messages Until RUN These messages deal primarily with the Remote Start feature. This message type is displayed until the ignition is in the RUN state.
UNDERSTANDING YOUR INSTRUMENT PANEL 313 • Left front turn signal lamp out • Right front turn signal lamp out • Left rear turn signal lamp out • Right rear turn signal lamp out • Service air filter • Low Tire Pressure • Perform service • ESC System Off • Service blind spot system • Blind spot detection unavailable • Blind spot system off • Blind spot detection unavailable sensor blocked • Normal Cruise Ready — When Adaptive Cruise Control (ACC) system is turned off and Normal (Fixed Speed) Cruise Control m
314 UNDERSTANDING YOUR INSTRUMENT PANEL • ACC Cancelled — To disable the ACC system. Refer to • Brake — If the ACC system predicts that its maximum “Adaptive Cruise Control (ACC)” in “Understanding braking level is not sufficient to maintain the set The Features Of Your Vehicle” (if equipped). distance, this message will flash and a chime will sound while ACC continues to apply its maximum • Sensed Vehicle Indicator — The system detects a braking capacity.
UNDERSTANDING YOUR INSTRUMENT PANEL 315 • ACC/FCW Unavailable Service Radar Sensor — If the • Oil temp high Speed may be limited ACC system turns off due to an internal system fault • Oil temp high Speed limited that requires service from an authorized dealer. Refer to “Adaptive Cruise Control (ACC)” in “Understand- • Turn signal on ing The Features Of Your Vehicle” (if equipped). • Park assist on • Cruise Off When Park Brake is On • Warning object detected • ACC Cancelled Below Min.
316 UNDERSTANDING YOUR INSTRUMENT PANEL • Memory 2 profile set • Service All Wheel Drive System • Memory system unavailable — Not in Park • All Wheel Drive System in neutral • Memory system unavailable — Seatbelt buckled • ECO — Fuel Saver Indicator • Memory 1 profile recall • To Tow Vehicle Safely, Read Neutral Shift Procedure in Owners Manual • Memory 2 profile recall • Wrong Key • Damaged Key • Key not programmed • Park Assist Disabled • Automatic high beams on • Automatic high beams off • AWD
UNDERSTANDING YOUR INSTRUMENT PANEL 317 EVIC White Telltale Lights • Electronic Speed Control SET This area will show reconfigurable white caution tellThis light will turn on when the electronic tales. These telltales include: speed control is SET. For further information, refer to “Electronic Speed Control” in “Under• Shift Lever Status standing The Features Of Your Vehicle.” The shift lever status “P,R,N,D,L,5,4,3,2,1” are displayed indicating the shift lever position.
318 UNDERSTANDING YOUR INSTRUMENT PANEL • Forward Collision Warning (FCW) OFF This light warns the driver of a potential collision with the vehicle in front and prompts the driver to take action in order to avoid the collision. For further information, refer to “Adaptive Cruise Control (ACC)” in “Understanding The Features Of Your Vehicle.” momentarily until the over temperature condition no longer exists. Once driving conditions are safe, then pull over and let vehicle idle.
UNDERSTANDING YOUR INSTRUMENT PANEL 319 EVIC Amber Telltale Lights • Windshield Washer Fluid Low Indicator This area will show reconfigurable amber caution tellThis light will turn on to indicate the windtales. These telltales include: shield washer fluid is low. • Low Fuel Light When the fuel level reaches approximately 3.0 gal • SERV AWD (11.0 L) this light will turn on, and remain on until The SERV AWD light monitors the electric shift AWD fuel is added. system.
320 UNDERSTANDING YOUR INSTRUMENT PANEL If the charging system light remains on, it means that the • Liftgate Ajar This light will turn on to indicate that liftgate vehicle is experiencing a problem with the charging system. Obtain SERVICE IMMEDIATELY. See an authomay be ajar. rized dealer. If jump starting is required, refer to “Jump Starting • Oil Pressure Warning Light Procedures” in “What To Do In Emergencies”. This light indicates low engine oil pressure.
UNDERSTANDING YOUR INSTRUMENT PANEL 321 If the light remains lit with the engine running, your vehicle will usually be drivable. However, see an authorized dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is required. You may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing. If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off.
322 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Continuous driving with the Transmission Temperature Warning Light illuminated will eventually cause severe transmission damage or transmission failure. WARNING! If the Transmission Temperature Warning Light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire.
UNDERSTANDING YOUR INSTRUMENT PANEL 323 Vehicles Equipped With Keyless Enter-N-Go Fuel Economy Press and release the UP/DOWN buttons until one of the 1. Without pressing the brake pedal, cycle the ignition to following Fuel Economy Functions displays in the EVIC: the ON/RUN position (Do not start the engine.) • Average Fuel Economy/Fuel Saver Mode 2. Fully depress the accelerator pedal, slowly, three times • Distance To Empty within 10 seconds. 3. Cycle the ignition to the OFF/LOCK position.
324 UNDERSTANDING YOUR INSTRUMENT PANEL (MDS) (if equipped) allows the engine to operate on four Distance To Empty (DTE) cylinders, or if you are driving in a fuel efficient manner. Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the SELECT button.
UNDERSTANDING YOUR INSTRUMENT PANEL 325 Press the UP/DOWN buttons to cycle through all the Vehicle Speed This feature allows you to monitor your vehicle speed on Trip Computer functions. The Trip Functions mode disthe EVIC display, press and release the SELECT button to plays the following information: change the units of measure between in MPH or km/h. Trip A Trip Info Shows the total distance traveled for Trip A since the last This feature allows you to track the total distance trav- reset.
326 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Info (Customer Information Features) Press and release the UP or DOWN button until “Vehicle Info” displays in the EVIC and press the SELECT button. Press the UP and DOWN button to scroll through the available information displays, then press SELECT to display any one of the following choices. • Coolant Temp Displays the actual coolant temperature. • Oil Temperature Displays the actual oil temperature. • Oil Pressure Displays the actual oil pressure.
UNDERSTANDING YOUR INSTRUMENT PANEL 327 Messages # Select from Main Menu using the UP or DOWN buttons. This feature shows the number of stored warning messages (in the # place holder). Pressing the SELECT button will allow you to see what the stored messages are. Press and release the UP and DOWN buttons if there is more than one message to step through the remaining stored messages. Pressing the BACK button takes you back to the Main Menu.
328 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: A good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc. Compass Variance Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences the variance should be set for the zone where the vehicle is driven, per the zone map.
UNDERSTANDING YOUR INSTRUMENT PANEL 329 3. Press the DOWN button until the “Compass Variance” 1. Turn ON the ignition switch. message is displayed in the EVIC, then press the SELECT 2. Press the UP or DOWN button until the Setup button. The last variance zone number displays in the (Customer-Programmable Features) menu is reached, EVIC. then press the SELECT button. 4. Press and release the SELECT button until the proper 3.
330 UNDERSTANDING YOUR INSTRUMENT PANEL Customer-Programmable Features (System Setup) Personal Settings allows you to set and recall features when the transmission is in PARK. If the transmission is out of PARK or the vehicle begins moving, a warning message SETUP NOT AVAILABLE, is followed in three seconds by, VEHICLE NOT IN PARK. Italian (Italiano), German (Deutsch), and Dutch (Nederlands). Then, as you continue, the information will display in the selected language.
UNDERSTANDING YOUR INSTRUMENT PANEL 331 feature showing the system has been activated, or the all doors will unlock no matter which passive entry check-mark is removed showing the system has been equipped door handle is grasped. If Driver Door 1st Press is programmed, only the driver’s door will unlock when deactivated. the driver’s door is grasped.
332 UNDERSTANDING YOUR INSTRUMENT PANEL button a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. Refer to “Driver Memory Seat” in “Understanding The Features Of Your Vehicle.” Horn With Remote Lock When this feature is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This feature may be selected with or without the “Flash Lamps with Lock” feature.
UNDERSTANDING YOUR INSTRUMENT PANEL 333 Flash Lamps With Lock When this feature is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the RKE transmitter. This feature may be selected with or without the sound horn on lock feature selected. To make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated.
334 UNDERSTANDING YOUR INSTRUMENT PANEL Easy Entry/Exit Seat (Available with Memory Seat Only) This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated.
UNDERSTANDING YOUR INSTRUMENT PANEL 335 Illuminated Approach When this feature is selected, the headlights will activate and remain on for 0, 30, 60, or 90 seconds when the doors are unlocked with the RKE transmitter. To make your selection, scroll up or down until the preferred setting is highlighted, then press and release the SELECT button until a check-mark appears next to the setting, showing that the setting has been selected.
336 UNDERSTANDING YOUR INSTRUMENT PANEL Gauge Glow Rings The gauge glow rings that illuminate the tachometer and speedometer in the instrument cluster can be turned on or off. To make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated.
UNDERSTANDING YOUR INSTRUMENT PANEL 337 of a possible collision with the vehicle in front of you when you are much closer. This allows for a more dynamic driving experience. To change FCW status press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the NOTE: If your vehicle has experienced any damage in system has been deactivated.
338 UNDERSTANDING YOUR INSTRUMENT PANEL the SELECT button until a check-mark appears next to the setting, showing that the setting has been selected. Refer to “Rear Park Assist System” in “Understanding The Features Of Your Vehicle” for system function and operating information. Calibrate Compass Refer to “Compass Display” for more information. Display Units Of Measure In: The EVIC, odometer, and Uconnect™ gps (if equipped) can be changed between English and Metric units of measure.
UNDERSTANDING YOUR INSTRUMENT PANEL 339 Refer to “Tires-General Information/Tire Inflation Pressures” in “Starting And Operating” for additional information. • Your system can be set to display pressure units in PSI, kPa, or BAR. MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ RHB) CD/DVD/HDD/NAV — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. Tire Pressure Display NOTE: • Tires heat up during normal driving conditions.
340 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details. Operating Instructions (Uconnect™ Phone) — If Equipped Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details. MEDIA CENTER 130 (SALES CODE RES) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL 341 Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio. Push the ON/VOLUME control knob a second and radio frequency. time to turn off the radio. Clock Setting Procedure Electronic Volume Control 1. Press and hold the TIME button until the hours blink. The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning 2.
342 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones.
UNDERSTANDING YOUR INSTRUMENT PANEL 343 SET/RND Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button. The symbol SET 1 will now show in the display window. Select the button (1 to 6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET/RND button, the station will continue to play but will not be stored into pushbutton memory.
344 UNDERSTANDING YOUR INSTRUMENT PANEL • This radio is capable of playing compact discs (CD), recordable compact discs (CD-R), rewritable compact discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display. If a CD does not go into the slot more than 1.0 in (2.
UNDERSTANDING YOUR INSTRUMENT PANEL 345 NOTE: Ejecting with the ignition OFF is not allowed on AM/FM Button Press the button to select either AM or FM mode. convertible or soft-top models (if equipped). SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection.
346 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Media (Disc Types) The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. a number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.
UNDERSTANDING YOUR INSTRUMENT PANEL 347 Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. MPEG Specification MPEG-1 Audio Layer 3 Sampling Frequency (kHz) 48, 44.
348 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
UNDERSTANDING YOUR INSTRUMENT PANEL 349 MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or NOTE: The radio sales code is located on the lower right ACC position to operate the radio. side of the radio faceplate. Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
350 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature (if equipped). Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
UNDERSTANDING YOUR INSTRUMENT PANEL 351 3. After adjusting the hours, press the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text will begin to blink. message broadcast from an FM station (FM mode only). 4. Adjust the minutes using the right side TUNE/ SCROLL control knob.
352 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. MUSIC TYPE Button Pressing this button once will turn on the Music Type mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be sePush the rotary TUNE/SCROLL control knob a third lected.
UNDERSTANDING YOUR INSTRUMENT PANEL 353 Program Type Information Jazz News Nostalgia Oldies Personality Public Rhythm and Blues Religious Music Religious Talk Rock Soft Soft Rock Soft Rhythm and Blues Sports Talk 16-Digit Character Display Inform Jazz News Nostalga Oldies Persnlty Public R&B Rel Musc Rel Talk Rock Soft Soft Rck Soft R&B Sports Talk Program Type Top 40 Weather 16-Digit Character Display Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be t
354 UNDERSTANDING YOUR INSTRUMENT PANEL hours, press the TUNE/SCROLL control knob to set the minutes. The minutes will begin to blink. Adjust the minutes using the right side TUNE/SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. AM/FM Button Press the button to select either AM or FM mode. SET/RND Button — To Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, press the SET/RND button.
UNDERSTANDING YOUR INSTRUMENT PANEL 355 If you insert a disc with the ignition ON/RUN and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display NOTE: will show the track number, and index time in minutes • The ignition switch must be in the ON/RUN or ACC and seconds. Play will begin at the start of track 1. position to operate the radio.
356 UNDERSTANDING YOUR INSTRUMENT PANEL If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or the radio will reinsert the CD but will not play it. another CD button is pressed. The RW (Reverse) button A disc can be ejected with the radio and ignition OFF. works in a similar manner.
UNDERSTANDING YOUR INSTRUMENT PANEL 357 Notes On Playing MP3 Files • Maximum number of files: 255 The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited. For large numbers writing MP3 files, pay attention to the following restricof files and/or folders, the radio may be unable to tions.
358 UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
UNDERSTANDING YOUR INSTRUMENT PANEL 359 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob.
360 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds to return to ⬙elapsed time⬙ display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
UNDERSTANDING YOUR INSTRUMENT PANEL 361 or visit the Sirius web site at www.sirius.com, or at Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on www.siriuscanada.ca for Canadian residents. the radio to exit this screen. Electronic Serial Number/Sirius Identification Number (ESN/SID) Selecting Uconnect™ Multimedia (Satellite) Mode Please have the following information available when Press the SAT button until ⬙SAT⬙ appears in the display.
362 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek following reasons: up and the left switch to seek down. The radio will • The vehicle is parked in an underground parking remain tuned to the new channel until you make another structure or under a physical obstacle. selection.
UNDERSTANDING YOUR INSTRUMENT PANEL 363 By pressing the SEEK button when the Music Type RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons function is active, the radio will be tuned to the next causes the tuner to search for the next channel in the channel with the same selected Music Type name. direction of the arrows.
364 UNDERSTANDING YOUR INSTRUMENT PANEL Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within five seconds after pressing the SET button, the channel will continue to play but will not be stored into pushbutton memory. You may add a second channel to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 365 This feature allows an iPod威 or external USB device to be Connecting The iPod姞 Or External USB Device plugged into the USB port, located in the center console. Use the connection cable to connect an iPod威 or external USB device to the vehicle’s USB/AUX connector port iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威 which is located in the center console. and iPhone威 devices. Some iPod威 software versions may not fully support the iPod威 control features.
366 UNDERSTANDING YOUR INSTRUMENT PANEL be routed through without damaging the cable when closing the lid. A factory cut out space for the cable to be routed may be located in the base of the center console on either the front or side. This allows routing of the cable without damaging it while closing the lid. If a cut out is not available in the center console base, route the cable away from the lid latch and in a place that will allow the lid to close without damaging the cable.
UNDERSTANDING YOUR INSTRUMENT PANEL 367 NOTE: If the device battery to be charged is completely on the radio faceplate or press the VR button and say ⬙USB⬙ or ⬙Switch to USB⬙. Once in the iPod威/USB/MP3 depleted, it may take awhile to charge. control mode, audio tracks (if available from audio Using This Feature device) start playing over the vehicle’s audio system.
368 UNDERSTANDING YOUR INSTRUMENT PANEL • Turning it counterclockwise (backward) by one • While a track is playing, press the INFO button to see click, will jump to the previous track in the list or the associated metadata (artist, track title, album, etc.) press the VR button and say ⬙Previous Track⬙ for that track. Pressing the INFO button again jumps to the next screen of data for that track.
UNDERSTANDING YOUR INSTRUMENT PANEL 369 • RND button (available on sales code RES radio only): Pressing this button toggles between Shuffle ON and Shuffle OFF modes for the iPod威 or external USB device, or press the VR button and say ⬙Shuffle ON⬙ or ⬙Shuffle Off⬙. If the RND icon is showing on the radio display, then the shuffle mode is ON. List Or Browse Mode During Play mode, pressing any of the buttons described below, will bring up List mode.
370 UNDERSTANDING YOUR INSTRUMENT PANEL • Preset 5 – Audiobooks • Preset 6 – Podcasts • Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • To exit List mode without selecting a track, press the same PRESET button again to go back to Play mode. • LIST button: The LIST button will display the top level menu of the iPod威 or external USB device.
UNDERSTANDING YOUR INSTRUMENT PANEL 371 WARNING! Do not plug in or remove the iPod威 or external USB device while driving. Failure to follow this warning could result in an accident. phone system. Seven devices can be paired to the Uconnect™ phone system, but just one can be selected and played. Selecting Different Audio Device 1. Press PHONE button to begin. Bluetooth Streaming Audio (BTSA) 2.
372 UNDERSTANDING YOUR INSTRUMENT PANEL Previous Track Use the SEEK DOWN button, or press the VR button on the radio and say “Previous Track” to jump to the previous track music on your cellular phone. Browse Browsing is not available on a BTSA device. Only the current song that is playing will display info.
UNDERSTANDING YOUR INSTRUMENT PANEL 373 • When the Video Screen are open and a DVD is inserted Or into the VES™ player, the screen turns on automatiPress the LOAD button then corresponding number (1–6) cally, the headphone transmitters turn on and playwhere the DVD is to be loaded (Non-Touch-Screen). back begins. 2. Insert the DVD with the label facing up.
374 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Remote Control 1. Press the MODE button on the Remote Control. NOTE: The VES™ system will retain the last setting when turned off. Using The Touch-Screen Radio Controls 2. While looking at the video screen, highlight DISC by either pressing Up/Down/Left/Right buttons or by re- 1. Press the MENU hard-key on the radio faceplate. peatedly pressing the MODE button, then press ENTER 2. Touch the Rear VES soft-key to display the Rear VES on the Remote Control.
UNDERSTANDING YOUR INSTRUMENT PANEL 375 4 Rear VES Soft-key Select Channel/Screen 1 And DISC In The MEDIA Column 3. Touch the 1 soft-key and then the DISC soft-key in the MEDIA column. To exit touch the back arrow soft-key at NOTE: • To view a DVD on the radio press the RADIO/MEDIA the top left of the screen. hard-key, on the radio faceplate, then touch the DISC tab soft-key and then the VIEW VIDEO soft-key.
376 UNDERSTANDING YOUR INSTRUMENT PANEL • Viewing a DVD on the Touch-Screen radio screen is Play Video Games not available in all states/provinces, and the vehicle Connect the video game console to the Auxiliary RCA must be stopped, and the shift lever must be in the input jacks located on the back of the center console. PARK position for vehicles with automatic transmission. In vehicles with manual transmission the parking brake must be engaged.
UNDERSTANDING YOUR INSTRUMENT PANEL 377 When connecting an external source to the AUX input, be sure to follow the standard color coding for the VES™ jacks: NOTE: Certain high-end video games, such as Playstation3 and XBox360 will exceed the power limit of the vehicle’s Power Inverter. Refer to the Power Inverter section in your vehicle’s Owner’s Manual for more information. 4 Ensure the Remote Control and Headphone switch is on Channel 1. Using The Remote Control 1.
378 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Touch-Screen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 3. Touch the 1 soft-key and then touch AUX 1 in the VES column. To exit press the back arrow soft-key at the top of the screen. 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES Controls screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 379 Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1 Ensure the Remote Control and Headphone switch is on Channel 2. Using The Remote Control 1. Press the MODE button on the Remote Control and the Mode Select Screen will display, unless a video is playing then only a small banner will appear on the bottom of the screen. 2.
380 UNDERSTANDING YOUR INSTRUMENT PANEL 3. To listen to an audio source on Channel 2 while a video is playing on Channel 1, touch the 2 soft-key and 1. Press the MENU hard-key on the radio faceplate. choose an audio source. To exit touch the back arrow 2. Touch the Rear VES soft-key to display the Rear VES soft-key at the top left of the left screen. Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES Controls screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 381 Important Notes For Single Video Screen System Play A DVD Using The Touch-Screen Radio • VES™ is able to transmit two channels of stereo audio 1. Press the OPEN/CLOSE or LOAD hard-key on the simultaneously. radio faceplate (Touch-Screen). • In split screen mode the left side equates to Channel 1 2. Insert the DVD with the label facing up. The radio and right side equates to Channel 2.
382 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Remote Control 1. Press the MODE button on the Remote Control. NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen. 2. While looking at Screen 1, highlight DISC by either • Channel/Screen 2 select mode information is shown pressing Up/Down/Left/Right buttons or by repeatedly on the right side of the screen. pressing the MODE button, then press ENTER. • The VES™ will retain the last setting when turned off.
UNDERSTANDING YOUR INSTRUMENT PANEL 383 4 Rear VES Soft-key Select Channel/Screen 1 And DISC In The MEDIA Column 3. Touch the 1 or 2 soft-key and then the DISC soft-key in the MEDIA column. To exit touch the back arrow at the NOTE: • To view a DVD on the radio press the RADIO/MEDIA top left of the screen. hard-key, on the radio faceplate, then touch the DISC tab soft-key and then the VIEW VIDEO soft-key.
384 UNDERSTANDING YOUR INSTRUMENT PANEL • Viewing a DVD on the Touch-Screen radio screen is Remote Control not available in all states/provinces, and the vehicle must be stopped, and the shift lever must be in the PARK position for vehicles with automatic transmission. In vehicles with manual transmission the parking brake must be engaged.
UNDERSTANDING YOUR INSTRUMENT PANEL 385 2. Channel Selector Indicators – When a button is 6. 䉲 / Prev – In radio modes, press to select to the pressed, the currently affected channel or channel button previous station. In disc modes, press to advance to the start of the current or previous audio track or video is illuminated momentarily. chapter. In menu modes, use to navigate in the menu. 3. Light – Turns the remote control backlighting on or off.
386 UNDERSTANDING YOUR INSTRUMENT PANEL disc in a radio with a multiple-disc changer, PROG Up mode is selected and the disc is stopped, press the SETUP selects the next disc and PROG Down selects the previ- button to access the DVD Setup menu. (see the DVD Setup Menu of this manual.) ous disc. 11. MUTE – Press to mute the headphone audio output 16. BACK – When navigating in menu mode, press to for the selected channel. return to the previous screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 387 Remote Control Storage The video screen(s) come with a built in storage compartment for the remote control which is accessible when the screen is opened. To remove the remote, use your index finger to pull and rotate the remote towards you. Do not try to pull the remote straight down as it will be very difficult to remove.
388 UNDERSTANDING YOUR INSTRUMENT PANEL with a DVD player, follow the radio’s instructions to Headphones Operation turn Video Lock on. The radio and the video screen(s) The headphones receive two separate channels of audio using an infrared transmitter from the video screen. indicate when Video Lock is active.
UNDERSTANDING YOUR INSTRUMENT PANEL 389 NOTE: The rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video system is turned off. Changing the Audio Mode for Headphones 1. Ensure the Remote Control channel/screen selector switch is in the same position as the headphone selector switch.. 1. 2. 3. 4.
390 UNDERSTANDING YOUR INSTRUMENT PANEL 3. If the video screen is displaying a video source (such as a DVD Video), pressing DISPLAY shows the status on a popup banner at the bottom of the screen. Pressing the MODE button will advance to the next mode. When the mode is in an audio only source (such as FM), the Mode Selection menu appears on screen. Replacing The Batteries Each set of headphones requires two AAA batteries for operation.
UNDERSTANDING YOUR INSTRUMENT PANEL 391 How Long Does The Coverage Last? This warranty lasts NATURE WHATSOEVER. Some states and jurisdictions may not allow the exclusion or limitation of incidental or as long as you own the Product. consequential damages, so the above limitation may not What Does This Warranty Cover? Except as specified apply to you. This warranty gives you specific legal below, this warranty covers any Product that in normal rights.
392 UNDERSTANDING YOUR INSTRUMENT PANEL You may register your Unwired威 wireless headphones mode, but not change stations until the radio mode is online at www.unwiredtechnology.com or by phone at changed to a mode that is different from the VES™ selected radio mode. When shared, the radio has priority 1-888-293-3332. over the VES™ or all radio modes (FM, AM, and SAT).
UNDERSTANDING YOUR INSTRUMENT PANEL 393 The VES™ can even control radio modes or video modes 1. Channel 1 Mode while the radio is turned off. The VES™ can access the 2. Channel 1 Shared Status radio modes or disc modes by navigating to those modes on the VES™ and activating a radio mode or disc mode. 3. Channel 1 Audio Only/Mute Information Mode Display 4. Channel 2 Mode 5. Channel 2 Shared Status 6. Channel 2 Audio Only/Mute 7. Channel 1 ENTER Button Action 8. Channel 2 ENTER Button Action 9. Clock 10.
394 UNDERSTANDING YOUR INSTRUMENT PANEL Numeric Keypad Menu When the display for either Channel 1 or Channel 2 shows DIRECT TUNE, pressing the remote control’s ENTER button activates a numeric keypad menu. This screen makes it easy to enter a specific tuner frequency, satellite channel, or track number. To enter the desired digit: 1. Press the remote control’s navigation buttons (䉱, 䉲, 䉴, 䉳) to navigate to the desired digit. 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 395 Station List Menu Disc Menu 4 Channel Selection Menu For SIRIUS Backseat TV™ When listening to Satellite audio or watching SIRIUS Backseat TV™ (if equipped), pressing the remote control’s MENU button displays a list of all available channels. Navigate this list using the remote control’s navigation buttons (䉱, 䉲) to find the desired station, press the remote control’s ENTER button to tune to that station.
396 UNDERSTANDING YOUR INSTRUMENT PANEL Display Settings settings are already set for optimum viewing, so there is no need to change these settings under normal circumstances. To change the settings, press the remote control’s navigation buttons (䉱, 䉲) to select an item, then press the remote control’s navigation buttons (䉴, 䉳) to change the value for the currently selected item.
UNDERSTANDING YOUR INSTRUMENT PANEL 397 • Close the video screen. Disc Formats The VES™ DVD player is capable of playing the follow• To change the current audio mode, press the remote ing types of discs (12 mm or 8 mm diameter): control’s MODE button. This will automatically select the next available audio mode without using the Mode • DVD-Video discs (MPEG-2 video compression) (see notes about DVD Region Codes) Select menu.
398 UNDERSTANDING YOUR INSTRUMENT PANEL If you record a disc using a personal computer, there may be cases where the VES™ DVD player may not be able to When a DVD-Audio disc is inserted in the VES™ DVD play some or the entire disc, even if it is recorded in a player, the DVD-Audio title on the disc is played by compatible format and is playable on other players. To default (most DVD-Audio discs also have a Video title, help avoid playback problems, use the following guidebut the Video title is ignored).
UNDERSTANDING YOUR INSTRUMENT PANEL 399 • Mixed media recordable DVD formats will only play the Video_TS portion of the disc. end with the extension ⬙.mp3⬙ or ⬙.MP3⬙ and WMA files must always end with the extension ⬙.wma⬙ or ⬙.WMA⬙. To prevent incorrect playback, do not use these extensions for any other types of files.
400 UNDERSTANDING YOUR INSTRUMENT PANEL between 64 and 192Kbps. Variable bit rates are also If a disc has a damaged track which results in audible or supported. For both formats, the recommended visible errors that persists for 2.0 seconds, the DVD player will attempt to continue playing the disc by sample rate is either 44.1kHz or 48kHz. skipping forward 1.0 to 3.0 seconds at a time.
UNDERSTANDING YOUR INSTRUMENT PANEL 401 Display Other Language Setup All of the Language settings have a special ⬙Other⬙ setting to accommodate languages other than Japanese or English. These languages are selected using a special fourdigit code. To enter a new language code, activate the DVD Setup Menu and follow these additional instructions: • Using the remote control Up and Down cursor buttons, highlight the Language item you want to edit, and then press the remote control ENTER button.
402 UNDERSTANDING YOUR INSTRUMENT PANEL • When the entire four-digit code is entered, press the remote control’s ENTER button. If the language code is not valid, the numbers all change back to ⬙*⬙. If the digits are visible after this step, then the language code is valid. them where lower numbers are designated for all audiences and higher numbers are designated for more adult audiences. When a DVD-Video disc is loaded, its rating is compared to the setting in the DVD player.
UNDERSTANDING YOUR INSTRUMENT PANEL 403 To set the password, activate the DVD Setup Menu and follow these additional instructions: • Using the remote control Left and Right cursor buttons, select the Rating tab. • Highlight ⬙Change Password⬙, and then press the remote control’s ENTER button. • Enter the current password. Select a digit, use the remote control Up and Down cursor buttons to set the value for the current digit, and then press the remote control’s Right cursor button to select the next digit.
404 UNDERSTANDING YOUR INSTRUMENT PANEL • After the four-digit password is entered, press the To set the rating, activate the DVD Setup Menu and remote control’s ENTER button to accept the change. follow these additional instructions: • Using the remote control’s Left and Right cursor buttons, select the Rating tab. • Highlight ⬙Change Rating⬙, and then press the remote control’s ENTER button. • Enter the current password.
UNDERSTANDING YOUR INSTRUMENT PANEL 405 Dolby威 Digital and MLP Lossless Manufactured • Using the remote control’s Up and Down cursor under license from Dolby Laboratories. ⬙Dolby⬙, buttons, select the new rating level, and then press the remote control’s ENTER button to accept the change. ⬙MLP Lossless⬙, and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Product Agreement Copyright 1992-1997 Dolby Laboratories.
406 UNDERSTANDING YOUR INSTRUMENT PANEL STEERING WHEEL AUDIO CONTROLS The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume.
UNDERSTANDING YOUR INSTRUMENT PANEL 407 The button located in the center of the left-hand control CD/DVD DISC MAINTENANCE will tune to the next preset station that you have pro- To keep a CD/DVD in good condition, take the following precautions: grammed in the radio preset pushbutton. CD Player Pressing the top of the switch once will go to the next track on the CD.
408 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particu- Dual-Zone Automatic Temperature Control (ATC) lar disc, it may be damaged (i.e., scratched, reflective — If Equipped coating removed, a hair, moisture or dew on the disc) • The Automatic Temperature Control (ATC) allows oversized, or have protection encoding. Try a known both driver and front passenger seat occupants to good disc before considering disc player service. select individual comfort settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 409 2. Recirculation Control Button Press and release to change the current setting, the indicator illuminates when ON. 3. Left Front Seat Occupant Temperature Display This display shows the temperature setting for the left front seat occupant. 4. Mode Display This display shows the current Mode selection (Panel, Bi-Level, Floor, Mix). Automatic Temperature Control (ATC) Panel 1.
410 UNDERSTANDING YOUR INSTRUMENT PANEL will cause the ATC to switch into manual mode. The 11. Blower Control blower will engage immediately if the Defrost mode is There are seven blower speeds, the blower speed increases as you move the control to the right from the selected. lowest blower setting. Performing this function will 8. Passenger Temperature Control Up Button cause the ATC to switch into manual mode. Provides the passenger with independent temperature control.
UNDERSTANDING YOUR INSTRUMENT PANEL 411 3. When the system is set up for your comfort level, it is 16. Driver Temperature Control Up Button Provides the driver with independent temperature con- not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to trol. Push the button for warmer temperature settings. function automatically. 17. Rear Control Button Provides the rear seat occupants with independent NOTE: blower and temperature control.
412 UNDERSTANDING YOUR INSTRUMENT PANEL selected. This allows the front occupants to control the Manual Operation This system offers a full complement of manual override volume of air circulated in the vehicle and cancel the features. Auto mode. NOTE: Each of these features operate independently The operator can also select the direction of the airflow from each other. If any one feature is controlled manually, by selecting one of the following positions.
UNDERSTANDING YOUR INSTRUMENT PANEL 413 NOTE: In many temperature positions, the BI-LEVEL temperature settings for best windshield and side winmode is designed to provide cooler air out of the panel dow defrosting. When the defrost mode is selected, the blower will automatically default to medium-high unless outlets and warmer air from the floor outlets. the blower is controlled manually. Floor Mode Air comes from the floor outlets.
414 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • If the system is in Mix, Floor or Defrost Mode, the A/C can be turned off, but the A/C system shall remain active to prevent fogging of the windows. NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging. The Recirculation mode is not allowed in the Defrost modes to improve window clearing operation. Recirculation will be disabled automatically if this mode is selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 415 Only when the Rear Control Icon is illuminated do the second row seat occupants have control of the rear blower speed. The rear blower control, located in the rear overhead console, has an off position and a range of blower speeds. This allows the second row seat occupants to control the volume of air circulated in the rear of the vehicle.
416 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: In many temperature positions, the BI-LEVEL Rear Temperature Control Only when the Rear Control Icon is illuminated do the mode is designed to provide cooler air out of the headsecond row seat occupants have control of the rear mode liner outlets and warmer air from the floor outlets. control knob. Floor Mode Air comes from the floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 417 blower speeds will reduce fogging. Interior fogging on Winter Operation the windshield can be quickly removed by selecting the When operating the system during the winter months, make sure the air intake, located directly in front of the DEFROST mode. windshield, is free of ice, slush, snow, or other Regular cleaning of the inside of the windows with a obstructions.
418 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips Chart
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 424 䡵 Automatic Transmission . . . . . . . . . . . . . . . . . 430 ▫ Automatic Transmission . . . . . . . . . . . . . . . 424 ▫ Key Ignition Park Interlock . . . . . . . . . . . . . 432 ▫ Keyless Enter-N-Go – If Equipped . . . . . . . . 425 ▫ Brake/Transmission Shift Interlock System . . 432 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 426 ▫ Five-Speed Automatic Transmission (3.
420 STARTING AND OPERATING 䡵 All-Wheel Drive Operation . . . . . . . . . . . . . . . 450 ▫ After Driving Off-Road . . . . . . . . . . . . . . . . 460 ▫ Single-Speed Operating Instructions/ Precautions (3.6L Engine) – If Equipped . . . . 450 䡵 Power Steering . . . . . . . . . . . . . . . . . . . . . . . 461 ▫ Electronically Shifted Transfer Case (Three-Position Switch) (5.7L Engine) – If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 450 ▫ Shifting Procedure . . . . . . . . . . . . . . . .
STARTING AND OPERATING 421 ▫ Electronic Stability Control (ESC) . . . . . . . . . 470 䡵 Tires — General Information . . . . . . . . . . . . . 488 ▫ Trailer Sway Control (TSC) . . . . . . . . . . . . . 474 ▫ Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . 488 ▫ Hill Start Assist (HSA) . . . . . . . . . . . . . . . . 474 ▫ Tire Inflation Pressures . . . . . . . . . . . . . . . . 489 ▫ Ready Alert Braking . . . . . . . . . . . . . . . . . . 477 ▫ Tire Pressures For High Speed Operation . .
422 STARTING AND OPERATING ▫ Replacement Tires . . . . . . . . . . . . . . . . . . . . 496 ▫ E-85 Usage In Non-Flex Fuel Vehicles . . . . . . 512 䡵 Tire Chains (Traction Devices) . . . . . . . . . . . . . 497 ▫ MMT In Gasoline . . . . . . . . . . . . . . . . . . . . 513 䡵 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 498 ▫ Materials Added To Fuel . . . . . . . . . . . . . . . 514 䡵 Tire Rotation Recommendations . . . . . . . . . . . 499 ▫ Fuel System Cautions . . . . . . . . . . . .
STARTING AND OPERATING 423 ▫ Replacement Parts . . . . . . . . . . . . . . . . . . . 519 ▫ Towing Requirements . . . . . . . . . . . . . . . . . 533 ▫ Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 519 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . 538 䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 519 䡵 Snow Plow . . . . . . . . . . . . . . . . . . . . . . . . . . 539 ▫ Fuel Filler Cap (Gas Cap) . . . . . . . . . . . . . .
424 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
STARTING AND OPERATING 425 CAUTION! (Continued) • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal. Do not press the accelerator.
426 STARTING AND OPERATING Installing And Removing The ENGINE START/STOP Button Installing The Button 1. Remove the key fob from the ignition switch. NOTE: The ENGINE START/STOP button should only be removed or inserted with the ignition in the LOCK position (OFF position for Keyless Enter-N-Go). Normal Starting Using The ENGINE START/STOP Button 2. Insert the ENGINE START/STOP button into the ignition switch with the lettering facing up and readable.
STARTING AND OPERATING 427 NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position and the transmission is in PARK, the system will automatically time out after 1. Place the shift lever in PARK, then press and release 30 minutes of inactivity and the ignition will switch to the the ENGINE START/STOP button. OFF position. 2. The ignition switch will return to the OFF position. Keyless Enter-N-Go Functions – With Driver’s Foot 3.
428 STARTING AND OPERATING • Press the ENGINE START/STOP button a second time If Engine Fails To Start to change the ignition switch to the RUN position WARNING! (EVIC displays “IGNITION MODE RUN”), • Press the ENGINE START/STOP button a third time to return the ignition switch to the OFF position (EVIC displays “IGNITION MODE OFF”).
STARTING AND OPERATING 429 Clearing A Flooded Engine (Using ENGINE START/STOP Button) If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather⬙ procedures, it may be flooded. To clear any excess fuel, press and hold the brake pedal, push the accelerator pedal all the way to the floor and hold it, then press and release the ENGINE START/STOP button once. The starter motor will engage automatically, run for 10 seconds, and then disengage.
430 STARTING AND OPERATING The engine block heater cord is located: • 3.6L Engine – coiled and strapped to the engine oil dipstick tube. • 5.7L Engine – bundled and fastened to the injector harness. The engine block heater must be plugged in at least one hour to have an adequate warming effect on the coolant. WARNING! Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt AC electrical cord could cause electrocution.
STARTING AND OPERATING 431 WARNING! WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the key fob. Once the key fob is removed, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
432 STARTING AND OPERATING WARNING! (Continued) • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your foot is firmly pressing the brake pedal.
STARTING AND OPERATING 433 The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers). Shifting from DRIVE to PARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped.
434 STARTING AND OPERATING PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the PARK position first, and then apply the parking brake.
STARTING AND OPERATING 435 WARNING! (Continued) WARNING! (Continued) • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your foot is firmly pressing the brake pedal.
436 STARTING AND OPERATING CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • Look at the shift lever position display and verify that it indicates the PARK position.
STARTING AND OPERATING 437 WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage.
438 STARTING AND OPERATING Transmission Limp Home Mode Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home Mode is activated. In this mode, the transmission remains in the current gear until the vehicle is brought to a stop. After the vehicle has stopped, the transmission will remain in second gear regardless of which forward gear is selected.
STARTING AND OPERATING 439 To exit ERS mode, simply press and hold the shift lever to Electronic Range Select (ERS) Operation The Electronic Range Select (ERS) shift control allows the the right (+) until “D” is once again displayed in the shift driver to limit the highest available gear when the shift lever position indicator in the instrument cluster. lever is in the DRIVE position.
440 STARTING AND OPERATING Overdrive Operation The automatic transmission includes an electronically controlled Overdrive (fifth gear). The transmission will automatically shift into the Overdrive gear if the following conditions are present: • the shift lever is in the DRIVE position, • vehicle speed is sufficiently high, and • the driver is not heavily pressing the accelerator. Six-Speed Automatic Transmission (5.
STARTING AND OPERATING 441 PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the PARK position first, and then apply the parking brake.
442 STARTING AND OPERATING WARNING! WARNING! (Continued) • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Your vehicle could move and injure you and others if it is not completely in PARK. Check by trying to move the shift lever rearward (with the brake pedal released), after you have placed it in PARK. Make sure the transmission is in PARK before leaving the vehicle.
STARTING AND OPERATING 443 WARNING! (Continued) CAUTION! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.
444 STARTING AND OPERATING • With brake pedal released, verify that the shift lever will not move out of PARK. REVERSE This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage.
STARTING AND OPERATING 445 To access all six available gears, you must use the If the transmission becomes extremely hot, the “TransElectronic Range Select (ERS) feature (refer to “Electronic mission Temperature Warning Light” may illuminate and the transmission may downshift out of Overdrive until Range Select (ERS)” in this section). the transmission cools down.
446 STARTING AND OPERATING torque converter clutch and the top overdrive gear are inhibited until the transmission fluid is warm (refer to the “Note” under “Torque Converter Clutch” in this section). During extremely cold temperatures (-16°F [-27°C] or below), operation may briefly be limited to first and direct gears only. Normal operation will resume once the transmission temperature has risen to a suitable level.
STARTING AND OPERATING 447 If the transmission cannot be reset, authorized dealer You can switch between DRIVE and ERS mode at any vehicle speed. When the shift lever is in the DRIVE service is required. position, the transmission will operate automatically, Electronic Range Select (ERS) Operation shifting between all available gears.
448 STARTING AND OPERATING Screen Display Actual Gear(s) Allowed 1 1 2 1-2 3 1-3 4 5 6 D 1,2, 1,2, 1,2, 1-5 4 4,5 4-6 • vehicle speed is sufficiently high, • the driver is not heavily pressing the accelerator, and • the TOW/HAUL switch has not been activated. NOTE: To select the proper gear position for maximum deceleration (engine braking), simply press and hold the When To Use TOW/HAUL Mode shift lever to the left (-).
STARTING AND OPERATING 449 Torque Converter Clutch A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in the upper gears. When the vehicle speed drops or during some accelerations, the clutch automatically disengages.
450 STARTING AND OPERATING Electronic Range Select (ERS) feature, when the trans- ABS and Traction Control, provides resistance to any mission is sufficiently warm, will demonstrate that the wheel that is slipping to allow additional torque transfer transmission is able to shift into and out of Overdrive. to wheels with traction. • If the vehicle has not been driven for several days, the first few seconds of operation after shifting the transmission into gear may seem sluggish.
STARTING AND OPERATING 451 This electronically shifted transfer case is designed to be driven in the AWD AUTO position for normal street and highway conditions on dry hard surfaced roads. For variable driving conditions, the AWD AUTO mode can be used. In this mode, the front axle is engaged, but the vehicle’s power is sent to the rear wheels. All-wheel drive will be automatically engaged when the vehicle senses a loss of traction.
452 STARTING AND OPERATING Transfer Case Position Indicator Messages The Transfer Case Position Indicator messages (AWD AUTO and LOW RANGE) are located in the EVIC (Electronic Vehicle Information Center) and indicate the current and desired transfer case selection. Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further information.
STARTING AND OPERATING 453 engine start up or illuminates during driving, it means Proper operation of all-wheel drive vehicles depends on that the all-wheel drive system is not functioning prop- tires of equal size, type and circumference on each wheel. erly and that service is required. Any difference in tire size can cause damage to the transfer case. WARNING! Always engage the parking brake when powering down the vehicle if the “SERV AWD Warning Light” is illuminated.
454 STARTING AND OPERATING For additional information on the appropriate use of each towing behind another vehicle. Refer to “Recreational transfer case mode position, see the information below: Towing” in “Starting and Operating” for further information. AWD AUTO All-Wheel Drive Auto Range - This range sends power to Shifting Procedure the rear wheels.
STARTING AND OPERATING 455 will flash until the transfer case completes the shift. 3. While still rolling, rotate the AWD control switch to When the shift is complete, the position indicator light the desired position. for the selected position will stop flashing and remain 4. After the desired position indicator light is ON (not ON. flashing), shift the transmission back into gear. AWD AUTO⇔LOW RANGE Alternate Procedure NOTE: When shifting into or out of LOW RANGE some 1.
456 STARTING AND OPERATING continuously while the original position indicator light is ON, until all requirements have been met. NOTE: The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, then the shift will not take place and no position indicator lights will be on or flashing. NEUTRAL Shift Procedure 1. Turn the ignition switch to the ON position, engine off. 2.
STARTING AND OPERATING 457 Vehicle Information Center (EVIC)” in “Understanding OFF-ROAD DRIVING TIPS Your Instrument Panel” for further information. When To Use LOW Range – If Equipped When off-road driving, shift to LOW for additional ON-ROAD DRIVING TIPS Utility vehicles have higher ground clearance and a traction.
458 STARTING AND OPERATING CAUTION! When driving through water, do not exceed 5 mph (8 km/h). Always check water depth before entering, as a precaution, and check all fluids afterward. Driving through water may cause damage that may not be covered by the new vehicle limited warranty. and/or the flow rate is reduced. If you must cross flowing water avoid depths in excess of 9 in (23 cm). The flowing water can erode the streambed, causing your vehicle to sink into deeper water.
STARTING AND OPERATING 459 Driving In Snow, Mud And Sand In heavy snow, when pulling a load, or for additional control at slower speeds, shift the transmission to a low gear and shift the transfer case to LOW if necessary. Refer to “All-Wheel Drive Operation” in “Starting and Operating” for further information. Do not shift to a lower gear than necessary to maintain forward motion. Over-revving the engine can spin the wheels and traction will be lost.
460 STARTING AND OPERATING Remember, never drive diagonally across a hill always After Driving Off-Road Off-road operation puts more stress on your vehicle than drive straight up or down. does most on-road driving. After going off-road, it is If the wheels start to slip as you approach the crest of a always a good idea to check for damage. That way you hill, ease off the accelerator and maintain forward motion can get any problems taken care of right away and have by turning the front wheels slowly.
STARTING AND OPERATING 461 • Check for accumulations of plants or brush. These • If you experience unusual vibration after driving in things could be a fire hazard. They might hide damage mud, slush or similar conditions, check the wheels for to fuel lines, brake hoses, axle pinion seals, and impacted material. Impacted material can cause a propeller shafts. wheel imbalance and freeing the wheels of it will correct the situation.
462 STARTING AND OPERATING CAUTION! Extreme steering maneuvers may cause the electrically driven pump to reduce or stop power steering assistance in order to prevent damage to the system. Normal operation will resume once the system is allowed to cool. occurred, which caused an over temperature condition in the power steering system. You will lose power steering assistance momentarily until the over temperature condition no longer exists.
STARTING AND OPERATING 463 5.7L Engine • Upon initial start-up in cold weather, the power steerThe standard power steering system will give you good ing pump may make noise for a short amount of time. vehicle response and increased ease of maneuverability This is due to the cold, thick fluid in the steering in tight spaces. The system will provide mechanical system. This noise should be considered normal, and it steering capability if power assist is lost. does not in any way damage the steering system.
464 STARTING AND OPERATING Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as anticipated. Coordinate inspection efforts through an authorized dealer. CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components.
STARTING AND OPERATING 465 MULTI-DISPLACEMENT SYSTEM (MDS) (IF EQUIPPED) — 5.7L ENGINE ONLY This feature offers improved fuel economy by shutting off four of the engine’s eight cylinders during light load and cruise conditions. The system is automatic with no driver inputs or additional driving skills required. NOTE: The MDS system may take some time to return to full functionality after a battery disconnect.
466 STARTING AND OPERATING NOTE: • When the parking brake is applied and the transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied. It does not show the degree of brake application.
STARTING AND OPERATING 467 WARNING! (Continued) • Do not leave the key fob in or near the vehicle, and do not leave Keyless Enter-N-Go in the ACC or ON/RUN mode. A child could operate power windows, other controls, or move the vehicle. • Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a collision. • Always fully apply the parking brake when leaving your vehicle, or it may roll and cause damage or injury.
468 STARTING AND OPERATING Anti-Lock Brake System (ABS) Traction Control System (TCS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lock-up and help avoid skidding on slippery surfaces during braking. This system monitors the amount of wheel spin of each of the driven wheels.
STARTING AND OPERATING 469 Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes. This can help reduce braking distances. The BAS complements the anti-lock brake system (ABS). Applying the brakes very quickly results in the best BAS assistance.
470 STARTING AND OPERATING Electronic Roll Mitigation (ERM) This system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicle speed are sufficient to potentially cause wheel lift, it then applies the brake of the appropriate wheel and may also reduce engine power to lessen the chance that wheel lift will occur.
STARTING AND OPERATING 471 counteracting the oversteer or understeer condition. En- flash during acceleration, ease up on the accelerator and gine power may also be reduced to help the vehicle apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. maintain the desired path. ESC uses sensors in the vehicle to determine the vehicle path intended by the driver and compares it to the actual path of the vehicle.
472 STARTING AND OPERATING The ESC system has two available operating modes in Partial Off AWD AUTO range and two-wheel drive vehicles, and This mode is entered by momentarily pressing the “ESC OFF” switch. When in “Partial Off” mode, the TCS one operating mode in AWD LOW range. portion of ESC, except for the BLD feature described in AUTO Range (All-Wheel Drive Models) Or the TCS section, has been disabled and the “ESC Off Two-Wheel Drive Models Indicator Light” will be illuminated.
STARTING AND OPERATING 473 Off” mode is overcome, turn ESC back on by momentarily pressing the “ESC OFF” switch. This may be done while the vehicle is in motion. WARNING! ESC OFF Switch NOTE: To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand, or gravel, it may be desirable to switch to the “Partial Off” mode by pressing the “ESC OFF” switch.
474 STARTING AND OPERATING and Operating” for further information. When TSC is functioning, the “ESC Malfunction Indicator Light” will Partial Off flash, the engine power may be reduced and you may This is the normal operating mode for ESC in AWD LOW feel the brakes being applied to individual wheels to range. Whenever the vehicle is started in AWD LOW attempt to stop the trailer from swaying.
STARTING AND OPERATING 475 brake pedal. If the driver does not apply the throttle HSA will work in REVERSE and all forward gears when during this short period of time, the system will release the activation criteria have been met. The system will not brake pressure and the vehicle will roll down the hill. The activate if the vehicle is placed in NEUTRAL or PARK.
476 STARTING AND OPERATING HSA HSA will provide assistance when starting on a grade when pulling a trailer. WARNING! • If you use a trailer brake controller with your trailer, your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released, there may not be enough brake pressure to hold the vehicle and trailer on a hill and this could cause a collision with another vehicle or object behind you.
STARTING AND OPERATING 477 Ready Alert Braking Ready Alert Braking may reduce the time required to reach full braking during emergency braking situations. It anticipates when an emergency braking situation may occur by monitoring how fast the throttle is released by the driver. When the throttle is released very quickly, Ready Alert Braking applies a small amount of brake pressure. This brake pressure will not be noticed by the driver.
478 STARTING AND OPERATING The “ESC Malfunction Indicator Light” (located in the TIRE SAFETY INFORMATION instrument cluster) starts to flash as soon as the tires lose Tire Markings traction and the ESC system becomes active. The “ESC Malfunction Indicator Light” also flashes when TCS is active. If the “ESC Malfunction Indicator Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible.
STARTING AND OPERATING 479 NOTE: • Temporary spare tires are spares designed for tempo• P (Passenger) - Metric tire sizing is based on U.S. rary emergency use only. Temporary high pressure design standards. P-Metric tires have the letter “P” compact spare tires have the letter “T” or “S” molded molded into the sidewall preceding the size designainto the sidewall preceding the size designation. Extion. Example: P215/65R15 95H. ample: T145/80D18 103M.
480 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.
STARTING AND OPERATING 481 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
482 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
STARTING AND OPERATING 483 Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
484 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
STARTING AND OPERATING 485 This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. axles must not be exceeded. For further information on GAWRs, vehicle loading, and trailer towing, refer to “Vehicle Loading” in this section.
486 STARTING AND OPERATING 3. Subtract the combined weight of the driver and pas- NOTE: • The following table shows examples on how to calcusengers from XXX lbs or XXX kg. late total load, cargo/luggage, and towing capacities 4. The resulting figure equals the available amount of of your vehicle with varying seating configurations cargo and luggage load capacity. For example, if “XXX” and number and size of occupants.
STARTING AND OPERATING 487 5
488 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING 489 WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement.
490 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage it. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter.
STARTING AND OPERATING 491 Tire Pressures For High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
492 STARTING AND OPERATING vehicle. If your vehicle has this option refer to an Compact Spare Tire – If Equipped authorized tire dealer for the recommended tire rotation The compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a pattern.
STARTING AND OPERATING 493 WARNING! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control.
494 STARTING AND OPERATING WARNING! WARNING! Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressure listed on your Tire and Loading Information Placard located on the driver’s side door opening. Replace (or repair) the original equipment tire at the first opportunity and reinstall it on your vehicle.
STARTING AND OPERATING 495 Life Of Tire The service life of a tire is dependent upon various factors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! 1 — Worn Tire 2 — New Tire Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an collision resulting in serious injury or death.
496 STARTING AND OPERATING Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed. (Refer to the paragraph on “Tread Wear Indicators”). Refer to the “Tire and Loading Information” placard for the size designation of your tire.
STARTING AND OPERATING 497 WARNING! (Continued) • Never use a tire with a smaller load index or capacity than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. You could lose control and have a collision. • Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control.
498 STARTING AND OPERATING CAUTION! CAUTION! (Continued) To avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted traction device clearance between tires and other suspension components, it is important that only traction devices in good condition are used. Broken devices can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate device breakage. Remove the damaged parts of the device before further use.
STARTING AND OPERATING 499 Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph (120 km/h). For speeds above 75 mph (120 km/h) refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures.
500 STARTING AND OPERATING The suggested rotation method is the “forward-cross” TIRE PRESSURE MONITOR SYSTEM (TPMS) The Tire Pressure Monitoring System (TPMS) will warn shown in the following diagram. the driver of a low tire pressure based on the vehicle recommended cold tire pressure. Tire Rotation The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease.
STARTING AND OPERATING 501 The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low pressure warning threshold for any reason, including low temperature effects, or natural pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above recommended cold tire pressure.
502 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Do not use aftermarket tire sealants or balance beads if your vehicle is equipped with a TPMS, as damage to the sensors may result.
STARTING AND OPERATING 503 • Seasonal temperature changes will affect tire pressure, A tire pressure monitoring sensor is located in the spare and the TPMS will monitor the actual tire pressure in wheel, if the vehicle is equipped with a matching full-size spare wheel and tire assembly. The matching full-size the tire. spare tire can be used in place of any of the four road Base System tires.
504 STARTING AND OPERATING vehicle may need to be driven for up to 20 minutes above 3. Lots of snow or ice around the wheels or wheel 15 mph (24 km/h) to receive this information. housings. The “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds, and remain on solid when a system fault is detected. In addition, a “SERVICE TPM SYSTEM” message will be displayed for a minimum of five seconds when a system fault is detected, and a chime will sound.
STARTING AND OPERATING 505 will turn OFF the “Tire Pressure Monitoring Telltale Light” as long as none of the road tires are below the low pressure warning threshold. • If your vehicle is not equipped with a matching full-size spare wheel and tire assembly, it does not have a tire pressure monitoring sensor in the spare tire. The TPMS will not be able to monitor the tire pressure.
506 STARTING AND OPERATING NOTE: It is particularly important, for you to regularly Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will check the tire pressure in all of your tires and to maintain illuminate in the instrument cluster, and an authe proper pressure. dible chime will be activated, when one or more of The Tire Pressure Monitor System (TPMS) consists of the the four active road tire pressures are low.
STARTING AND OPERATING 507 The system will automatically update, the graphic display of the pressure value(s) will stop “flashing,” and the “Tire Pressure Monitoring Telltale Light” will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information.
508 STARTING AND OPERATING NOTE: Your system can be set to display pressure units message will not be present, and a pressure value will be in PSI, kPa, or BAR. displayed instead of dashes. A system fault can occur by any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings.
STARTING AND OPERATING 509 Pressure Monitoring Telltale Light” as long as none of message is then followed by a graphic display, with road tires are below the low pressure warning threshpressure values still shown. This indicates the pressure old. values are still being received from the TPM Sensors but they may not be located in the correct vehicle position.
510 STARTING AND OPERATING For each subsequent ignition switch cycle, a chime will sound, the “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and then remain on solid, and the EVIC will display a ⬙SERVICE TPM SYSTEM⬙ message for a minimum of five seconds and then display dashes (- -) in place of the pressure value. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the spare tire, the TPMS will update automatically.
STARTING AND OPERATING 511 FUEL REQUIREMENTS 3.6L Engine – If Equipped This engine is designed to meet all emissions regulations and provide excellent fuel economy and performance when using high-quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended, as it will not provide any benefit over regular gasoline in these engines. 5.
512 STARTING AND OPERATING Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline.” Reformulated gasoline contains oxygenates and are specifically blended to reduce vehicle emissions and improve air quality. The manufacturer supports the use of reformulated gasoline. Properly blended reformulated gasoline will provide excellent performance and durability of engine and fuel system components.
STARTING AND OPERATING 513 If a Non-FFV vehicle is inadvertently fueled with E-85 MMT In Gasoline fuel, the engine will have some or all of these symptoms: MMT is a manganese-containing metallic additive that is blended into some gasoline to increase octane. Gasoline • operate in a lean mode blended with MMT provides no performance advantage • OBD II “Malfunction Indicator Light” on beyond gasoline of the same octane number without MMT.
514 STARTING AND OPERATING Materials Added To Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law.
STARTING AND OPERATING 515 Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
516 STARTING AND OPERATING the other sections of this manual for information on features that are common between Flexible Fuel and gasoline-only powered vehicles. CAUTION! Only vehicles with the E-85 fuel filler door label can operate on E-85.
STARTING AND OPERATING 517 Ethanol Fuel (E-85) When you do switch fuel types it is recommended that: E-85 is a mixture of approximately 85% fuel ethanol and • you do not switch when the fuel gauge indicates less 15% unleaded gasoline. than 1/4 full WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smoking materials lit in or near the vehicle when removing the fuel filler tube cap (gas cap) or filling the tank.
518 STARTING AND OPERATING • Some additives used in regular gasoline are not fully compatible with E-85 and may form deposits in your engine. To eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as MOPAR威 Injector Cleanup or Techron may be used. Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles FFV vehicles operated on E-85 require specially formulated engine oils.
STARTING AND OPERATING 519 Replacement Parts Maintenance Many components in your Flexible Fuel Vehicle (FFV) are CAUTION! designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol comDo not use ethanol mixture greater than 85% in your patible parts. vehicle. It will cause difficulty in cold starting and may affect driveability. CAUTION! Replacing fuel system components with non-ethanol compatible components can damage your vehicle.
520 STARTING AND OPERATING 1. Press the fuel filler door release switch (located under 2. Open the fuel filler door, and remove the fuel filler the headlamp switch). cap.
STARTING AND OPERATING 521 CAUTION! WARNING! • Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “Malfunction Indicator Light (MIL)” to illuminate, due to fuel vapors escaping from the system. • A poorly fitting gas cap may cause the MIL to turn on.
522 STARTING AND OPERATING • Tighten the gas cap about one-quarter turn until you hear one click. This is an indication that the cap is properly tightened. • If the gas cap is not tighten properly, the MIL will come on. Be sure the gas cap is tightened every time the vehicle is refueled. Emergency Fuel Filler Door Release If you are unable to open the fuel filler door, use the fuel filler door emergency release. 1. Open the liftgate. Release Cable 2.
STARTING AND OPERATING 523 in “Understanding Your Instrument Panel” for further information. Tighten the fuel filler cap properly and press the SELECT button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. VEHICLE LOADING Certification Label As required by National Highway Traffic Safety Administration regulations, your vehicle has a certification label affixed to the driver’s side door or B-Pillar.
524 STARTING AND OPERATING springs, tires, or wheels). Heavier axles or suspension components, sometimes specified by purchasers for increased durability, does not necessarily increase the vehicle’s GVWR. capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and rear curb weight values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are added.
STARTING AND OPERATING 525 until the specified weight limitations are met. Store the heavier items down low and be sure that the weight is distributed equally. Stow all loose items securely before driving. TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle.
526 STARTING AND OPERATING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Gross Combination Weight Rating (GCWR) Certification Label” in “Starting and Operating” for The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. further information.
STARTING AND OPERATING 527 Trailer Tongue Weight (TW) The TW is the downward force exerted on the hitch ball by the trailer. In most cases it should not be less than 10% or more than 15% of the trailer load. You must consider this as part of the load on your vehicle. Weight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle.
528 STARTING AND OPERATING trailer stability. A friction/hydraulic sway control mechanism and a weight distributing (load equalizing) hitch are recommended for heavier trailer tongue weights (TW) and may be required depending on Vehicle and Trailer configuration/loading to comply with gross axle weight rating (GAWR) requirements. WARNING! • An improperly adjusted weight-distributing hitch system may reduce handling, stability, and braking performance, and could result in a collision.
STARTING AND OPERATING 529 5 With Weight-Distributing Hitch (Correct) Improper Adjustment of Weight-Distributing Hitch (Incorrect)
530 STARTING AND OPERATING Trailer Hitch Classification Your vehicle may be factory equipped for safe towing of trailers weighing over 3,500 lbs (1 587 kg) with the optional Trailer Tow Prep Package. See your authorized dealer for package content. The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
STARTING AND OPERATING 531 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Model Model GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross Trailer Wt.) Max. Trailer Tongue Wt. (See Note) 3.6L RWD 11,600 lbs (5 262 kg) 40 sq ft (3.72 sq m) 6,200 lbs (2 812 kg) 620 lbs (281 kg) 3.6L AWD 11,600 lbs (5 262 kg) 40 sq ft (3.72 sq m) 6,200 lbs (2 812 kg) 620 lbs (281 kg) 5.
532 STARTING AND OPERATING If the gross trailer weight is 3,500 lbs (1 587 kg) or more, it is mandatory to use a weight-distributing hitch to ensure stable handling of your vehicle. NOTE: Vehicles not factory equipped with trailer tow package are limited to 3,500 lbs (350 lbs tongue weight). Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
STARTING AND OPERATING 533 NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to “Tire Safety Information/Tire and Loading Information Placard” in “Starting and Operating” for further information.
534 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision. • When hauling cargo or towing a trailer, do not overload your vehicle or trailer.
STARTING AND OPERATING 535 Towing Requirements – Tires − Do not attempt to tow a trailer while using a compact spare tire. replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GAWR limits. Towing Requirements – Trailer Brakes − Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.
536 STARTING AND OPERATING CAUTION! WARNING! (Continued) If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. • Towing any trailer will increase your stopping distance. When towing, you should allow for additional space between your vehicle and the vehicle in front of you.
STARTING AND OPERATING 537 5 Four-Pin Connector 1 — Female Pins 2 — Male Pin 3 — Ground 4 — Park 5 — Left Stop/Turn 6 — Right Stop/Turn Seven-Pin Connector 1 2 3 4 — — — — Battery Backup Lamps Right Stop/Turn Electric Brakes 5 — Ground 6 — Left Stop/Turn 7 — Running Lamps
538 STARTING AND OPERATING Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. The transmission fluid and filter should be changed if you REGULARLY tow a trailer for more than 45 minutes of continuous operation. Refer to “Maintenance Schedule” for the proper maintenance intervals. Automatic Transmission The DRIVE range can be selected when towing.
STARTING AND OPERATING 539 Cooling System SNOW PLOW To reduce potential for engine and transmission over- Snow plows, winches, and other aftermarket equipment heating, take the following actions: should not be added to the front end of your vehicle. The airbag crash sensors may be affected by the change in the − City Driving front end structure. The airbags could deploy unexpectWhen stopped for short periods of time, shift the transedly or could fail to deploy during a collision.
540 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.
STARTING AND OPERATING 541 6. Install a suitable clamping device, designed for towRecreational Towing – Rear-Wheel Drive Models DO NOT flat tow this vehicle. Damage to the drivetrain ing, to secure the front wheels in the straight position. will result. Recreational towing (for two-wheel drive models) is allowed ONLY if the rear wheels are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this procedure: 1.
542 STARTING AND OPERATING CAUTION! CAUTION! Towing this vehicle in violation of the above requirements can cause severe transmission and/or transfer case damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty. • Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. • Tow only in the forward direction.
STARTING AND OPERATING 543 CAUTION! (Continued) • Failure to follow these procedures can cause severe transmission and/or transfer case damage. Damage from improper towing is not covered under the New Vehicle Limited Warranty. • Do not use a bumper-mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged.
544 STARTING AND OPERATING CAUTION! It is necessary to follow these steps to be certain that the transfer case is fully in NEUTRAL (N) before recreational towing to prevent damage to internal parts. 4. Turn the ignition switch to the ON/RUN position, but do not start the engine. 5. Press and hold the brake pedal. 6. Shift the transmission into NEUTRAL. 7. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case NEUTRAL (N) 1.
STARTING AND OPERATING 545 11. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 12. Repeat steps 9 and 10 with transmission in DRIVE. 13. Turn OFF the engine. 14. Firmly apply the parking brake. 15. Shift the transmission into PARK. CAUTION! NEUTRAL Switch 8. After the shift is completed and the NEUTRAL (N) light stays on, release the NEUTRAL (N) button. 9. Start the engine. 10. Shift the transmission into REVERSE.
546 STARTING AND OPERATING 17. Attach the vehicle to the tow vehicle using a suitable tow bar. • A flashing NEUTRAL (N) indicator light indicates that shift requirements have not been met. 18. Release the parking brake. Shifting Out Of NEUTRAL (N) Use the following procedure to prepare your vehicle for normal usage: NOTE: • Steps 1 through 6 are requirements that must be met prior to pressing the NEUTRAL (N) button, and must continue to be met until the shift has been completed.
STARTING AND OPERATING 547 NOTE: When shifting out of transfer case NEUTRAL (N), turning the engine OFF may be required to avoid gear clash. 9. Shift transmission into PARK. 10. Release the brake pedal. 11. Disconnect vehicle from the tow vehicle. 12. Start the engine. 13. Press and hold the brake pedal. 14. Release the parking brake. NEUTRAL Switch 15. Shift the transmission into DRIVE, release the brake 7.
548 STARTING AND OPERATING NOTE: • The ignition switch must be in the ON/RUN position • Steps 1 through 5 are requirements that must be met for a transfer case shift to take place and for the prior to pressing the transfer case NEUTRAL (N) position indicator lights to be operable. If the ignition button and must continue to be met until the shift has switch is not in the ON/RUN position, the shift will been completed.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 551 ▫ Road Tire Installation . . . . . . . . . . . . . . . . . 566 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 551 䡵 Jump-Starting . . . . . . . . . . . . . . . . . . . . . . . . 567 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 552 ▫ Preparations For Jump-Start . . . . . . . . . . . . . 568 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . 553 ▫ Jump-Starting Procedure .
550 WHAT TO DO IN EMERGENCIES 䡵 Towing A Disabled Vehicle . . . . . . . . . . . . . . . 574 ▫ Rear-Wheel Drive Models . . . . . . . . . . . . . . 576 ▫ Towing Without The Ignition Key Fob . . . . . 576 ▫ All-Wheel Drive Models . . . . . . . . . . . . . . .
WHAT TO DO IN EMERGENCIES 551 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the switch bank just above the climate controls. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning • On the highways — slow down. flasher.
552 WHAT TO DO IN EMERGENCIES CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads HOT (H), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on HOT (H), and you hear continuous chimes, turn the engine off immediately and call for service. WARNING! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator.
WHAT TO DO IN EMERGENCIES 553 WARNING! (Continued) • The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack Location The scissor-type jack and tire changing tools are located in rear cargo area, below the load floor.
554 WHAT TO DO IN EMERGENCIES Rotate the thumb screw on the jack to loosen the assem- the square socket extension to rotate the “spare tire drive” nut. The nut is located under a plastic cover at the bly and remove the jack from the bracket. center-rear of the cargo floor area, just inside the liftgate opening. Thumb Screw Location Spare Tire Stowage The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism.
WHAT TO DO IN EMERGENCIES 555 CAUTION! Do not use power tools to winch the tire up or down. Impact type tools can damage the winch mechanism. Spare Tire Removal 1. Remove the jack tools from the bag. 2. Raise the rubber mat and remove the plug from storage compartment floor. 3. Fit the jack handle extension over the drive nut. Use the lug wrench handle and extension to completely lower the spare tire. Keep turning the handle until the winch stops.
556 WHAT TO DO IN EMERGENCIES 4. Slide the tire out from under the vehicle and rotate it 5. Spread the retaining tabs on the plastic plate and pull vertically behind the rear bumper. the metal stamping toward you to release it from the plastic plate.
WHAT TO DO IN EMERGENCIES 557 6. Slide the metal stamping up the steel extension tube 7. Pinch the three short and two long tubes to remove the and winch cable. Rotate the metal stamping and push it protective plate from the steel spare wheel. through the hole in the plastic plate and wheel.
558 WHAT TO DO IN EMERGENCIES Preparations For Jacking 1. Park the vehicle on a firm level surface, away from traffic. 3. Block the diagonally opposite wheel. WARNING! Do not attempt to change a tire on the side of the vehicle closest to moving traffic, pull far enough off the road to avoid being hit when operating the jack or changing the wheel. 2. Place the transmission in PARK, set the parking brake and activate the Hazard Warning flashers.
WHAT TO DO IN EMERGENCIES 559 Jacking Instructions WARNING! (Continued) WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Turn on the Hazard Warning flasher. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set the automatic transmission in PARK.
560 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Loosen (but do not remove) the wheel lug nuts by turning them to the left, one turn, while the wheel is still on the ground. 2. Assemble the jack and jacking tools. Jack and Tool Assembly 3.
WHAT TO DO IN EMERGENCIES 561 6 Lift Point Symbol On Sill Molding Front Jacking Location
562 WHAT TO DO IN EMERGENCIES 4. For a rear tire, place the jack in the slot on the rear tie-down bracket, just forward of the rear tire (as indicated by the triangular lift point symbol on the sill molding). Do not raise the vehicle until you are sure the jack is fully engaged. Rear Jacking Location 5. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle just enough to remove the flat tire.
WHAT TO DO IN EMERGENCIES 563 WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and wheel. 7. Install the spare wheel/tire on the vehicle and install the lug nuts with the cone-shaped end toward the wheel. Lightly tighten the nuts. CAUTION! Be sure to mount the spare tire with the valve stem facing outward.
564 WHAT TO DO IN EMERGENCIES 8. Lower the vehicle by turning the jack screw counterclockwise, and remove the jack and wheel blocks. 9. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened twice. The correct wheel nut tightness is 110 ft lbs (150 N·m).
WHAT TO DO IN EMERGENCIES 565 6 Installing Winch Road Wheel Installed In Spare Location 12. Slide the road wheel on the ground using the protec- NOTE: Double check to ensure the tire is snug against tive plate until it is directly under the winch and between the underbody of the vehicle. Damage to the winch cable the rear bumper and exhaust system heat shields. Raise may result if the vehicle is driven with the tire loose.
566 WHAT TO DO IN EMERGENCIES WARNING! Do not use power tools to winch the tire up or down. Impact-type tools may damage the winch mechanism. 15. Have the aluminum road wheel and tire repaired as soon as possible and properly secure the spare tire, jack and tool kit. WARNING! A loose tire or jack, thrown forward in a collision or 13. Lower the jack to the fully closed position. Return the hard stop could endanger the occupants of the vetools to the proper positions in the tool bag. Fold the flap hicle.
WHAT TO DO IN EMERGENCIES 567 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle is lowered to the ground. JUMP-STARTING If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully. 3.
568 WHAT TO DO IN EMERGENCIES WARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury. Preparations For Jump-Start The battery in your vehicle is located under the passenger’s front seat. There are remote locations located under the hood to assist in jump-starting.
WHAT TO DO IN EMERGENCIES 569 WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
570 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. 5.
WHAT TO DO IN EMERGENCIES 571 7. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery. 8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. 9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle. CAUTION! Accessories that can be plugged into the vehicle power outlets draw power from the vehicle’s battery, even when not in use (i.e.
572 WHAT TO DO IN EMERGENCIES CAUTION! CAUTION! (Continued) Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the engine to idle with the shift lever in NEUTRAL for at least one minute after every five rocking-motion cycles. This will minimize overheating and reduce the risk of transmission failure during prolonged efforts to free a stuck vehicle.
WHAT TO DO IN EMERGENCIES 573 EMERGENCY TOW HOOKS — IF EQUIPPED If your vehicle is equipped with tow hooks, there will be one in the rear and two mounted on the front of the vehicle. The rear hook will be located on the driver’s side of the vehicle. CAUTION! Tow hooks are for emergency use only, to rescue a vehicle stranded off road. Do not use tow hooks for tow truck hookup or highway towing. You could damage your vehicle.
574 WHAT TO DO IN EMERGENCIES 4. Using a screwdriver or similar tool, carefully remove 6. Using the screwdriver or similar tool, reach into the the shift lever override access cover, located on the opening and press and hold the shift lever override down. bottom of the cupholder. 7. Move the shift lever to the NEUTRAL position. 8. The vehicle may then be started in NEUTRAL. 9. Reinstall the shift lever override access cover and rubber liner. Shift Lever Override Access Cover 5.
WHAT TO DO IN EMERGENCIES 575 Towing Condition Flat Tow Wheel Lift or Dolly Tow Flatbed Wheels OFF the Ground NONE Front Rear ALL RWD MODELS AWD MODELS If transmission is operable: See instructions in “Recreational Towing” under “Starting and Operating” • Transmission in NEUTRAL • Transmission in PARK • 30 mph (48 km/h)max speed • Transfer Case in NEUTRAL • 15 miles (24 km) max distance • Tow in forward direction NOT ALLOWED NOT ALLOWED BEST METHOD OK BEST METHOD Proper towing or lifting e
576 WHAT TO DO IN EMERGENCIES If the vehicle’s battery is discharged refer to “Shift Lever Rear-Wheel Drive Models Override” in “What To Do In Emergencies” for instruc- The manufacturer recommends towing your vehicle with tions on shifting the automatic transmission out of the all four wheels OFF the ground using a flatbed. PARK position for towing.
WHAT TO DO IN EMERGENCIES 577 If the transmission is not operable, or the vehicle must be towed faster than 30 mph (48 km/h) or farther than 15 miles (24 km), tow with the rear wheels OFF the ground. Acceptable methods are to tow the vehicle on a flatbed, or with the front wheels raised and the rear wheels on a towing dolly, or (when using a suitable steering wheel stabilizer to hold the front wheels in the straight position) with the rear wheels raised and the front wheels on the ground.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 3.6L . . . . . . . . . . . . . 581 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 590 䡵 Engine Compartment — 5.7L . . . . . . . . . . . . . 582 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . 590 䡵 Onboard Diagnostic System — OBD II . . . . . . 583 ▫ Maintenance-Free Battery . . . . . . . . . . . . . . 591 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 583 ▫ Air Conditioner Maintenance . . . . . . . . . . . .
580 MAINTAINING YOUR VEHICLE ▫ Brake System . . . . . . . . . . . . . . . . . . . . . . . 607 ▫ Halogen Headlamps – If Equipped . . . . . . . . 627 ▫ Front/Rear Axle Fluid . . . . . . . . . . . . . . . . . 609 ▫ Front Turn Signal . . . . . . . . . . . . . . . . . . . . 628 ▫ Transfer Case . . . . . . . . . . . . . . . . . . . . . . . 610 ▫ Front Fog Lamps . . . . . . . . . . . . . . . . . . . . 628 ▫ Automatic Transmission . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 581 ENGINE COMPARTMENT — 3.
582 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 5.
MAINTAINING YOUR VEHICLE 583 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
584 MAINTAINING YOUR VEHICLE the SELECT button to turn off the message. If the Normally, the OBD II system will be ready. The OBD II problem continues, the message will appear the next time system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacethe vehicle is started. ment. If the OBD II system should be determined not A loose, improperly installed, or damaged fuel filler cap ready for the I/M test, your vehicle may fail the test.
MAINTAINING YOUR VEHICLE 585 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a. The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
586 MAINTAINING YOUR VEHICLE DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE 587 CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
588 MAINTAINING YOUR VEHICLE Change Engine Oil American Petroleum Institute (API) Engine Oil The oil change indicator system will remind you that it is Identification Symbol This symbol means that the oil has time to take your vehicle in for scheduled maintenance. been certified by the American Refer to “Maintenance Schedule” for further information. Petroleum Institute (API).
MAINTAINING YOUR VEHICLE 589 Engine Oil Viscosity – 3.6L Engine SAE 5W-30 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. For information on engine oil filler cap location, refer to “Engine Compartment” in “Maintaining Your Vehicle” for further information.
590 MAINTAINING YOUR VEHICLE Materials Added To Engine Oils Do not add any supplemental materials, other than leak detection dyes, to your engine oil. Engine oil is an engineered product and its performance may be impaired by supplemental additives. Engine Oil Filter The engine oil filter should be replaced with a new filter at every oil change. Engine Oil Filter Selection The manufacturer’s engines have a full-flow type disposable oil filter. Use a filter of this type for replacement.
MAINTAINING YOUR VEHICLE 591 WARNING! The air induction system (air cleaner, hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc.) removed. Failure to do so can result in serious personal injury.
592 MAINTAINING YOUR VEHICLE WARNING! (Continued) CAUTION! • Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 Volts. Do not allow cable clamps to touch each other. • Battery posts, terminals, and related accessories contain lead and lead compounds. Wash hands after handling.
MAINTAINING YOUR VEHICLE 593 Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt condition should also be checked at this time. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components.
594 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency (EPA) and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. The A/C air filter is located in the fresh air inlet behind the glove box.
MAINTAINING YOUR VEHICLE 595 CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. 7. Rotate the glove compartment door back into position.
596 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. Avoid using the wiper blades to wipe frost or ice from the When performing other underhood services, the hood windshield. Keep the blade rubber out of contact with latch, release mechanism and safety catch should be petroleum products such as engine oil, gasoline, etc. cleaned and lubricated.
MAINTAINING YOUR VEHICLE 597 3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. 1 — Wiper Arm 2 — Pivot Cap NOTE: The rear wiper arm cannot be raised fully upward unless the pivot cap is raised first. 2. Lift the rear wiper arm upward to raise the wiper blade off of the liftgate glass.
598 MAINTAINING YOUR VEHICLE 4. Install the wiper blade pivot pin into the wiper blade windshield washer solvent only (not radiator antifreeze). holder at the end of the wiper arm, and firmly press the When refilling the washer fluid reservoir, take some washer fluid and apply it to a cloth or towel and wipe wiper blade until it snaps into place. clean the wiper blades, this will help blade performance. 5.
MAINTAINING YOUR VEHICLE 599 Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sound of the exhaust system; or if the exhaust fumes can be detected inside the vehicle; or when the underside or rear of the vehicle is damaged; have an authorized technician inspect the complete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts.
600 MAINTAINING YOUR VEHICLE CAUTION! • The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine. • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
MAINTAINING YOUR VEHICLE 601 To minimize the possibility of catalytic converter dam- Cooling System age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. WARNING! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator.
602 MAINTAINING YOUR VEHICLE accumulation of bugs, leaves, etc. If dirty, clean by gently Cooling System – Drain, Flush, And Refill spraying water from a garden hose vertically down the If the engine coolant (antifreeze) is dirty and contains a considerable amount of sediment, clean and flush with face of the condenser. reliable cooling system cleaner. Follow with a thorough Check the engine cooling system hoses for brittle rubber, rinsing to remove all deposits and chemicals.
MAINTAINING YOUR VEHICLE 603 CAUTION! • Mixing of engine coolant (antifreeze), other than the specified HOAT engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. If a non-HOAT engine coolant (antifreeze) is introduced into the cooling system in an emergency, it should be replaced with the specified engine coolant (antifreeze) as soon as possible. • Do not use water alone or alcohol based engine coolant (antifreeze) products.
604 MAINTAINING YOUR VEHICLE • Mix a minimum solution of 50% HOAT engine coolant (antifreeze) and distilled water. Use higher concentrations (not to exceed 70%) if temperatures below -34°F (-37°C) are anticipated. NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent engine coolant (antifreeze) changes.
MAINTAINING YOUR VEHICLE 605 WARNING! • The warning words DO NOT OPEN HOT on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle.
606 MAINTAINING YOUR VEHICLE of this. As long as the engine operating temperature is If an examination of your engine compartment shows no satisfactory, the coolant bottle need only be checked once evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. a month. When additional engine coolant (antifreeze) is needed to • Do not overfill the coolant recovery bottle.
MAINTAINING YOUR VEHICLE 607 • Make sure that the radiator and coolant recovery bottle hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage.
608 MAINTAINING YOUR VEHICLE With disc brakes, the fluid level can be expected to fall as the brake linings wear. However, an unexpected drop in fluid level may be caused by a leak and a system check should be conducted. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. WARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information.
MAINTAINING YOUR VEHICLE 609 WARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Front/Rear Axle Fluid For normal service, periodic fluid level checks are not required. When the vehicle is serviced for other reasons the exterior surfaces of the axle assembly should be inspected. If gear oil leakage is suspected inspect the fluid level.
610 MAINTAINING YOUR VEHICLE CAUTION! Do not over tighten the plugs as it could damage then and cause them to leak. Adding Fluid Add fluid at the filler hole, until it runs out of the hole, when the vehicle is in a level position. Drain First remove fill plug, then remove drain plug. RecomSelection Of Lubricant mended tightening torque for drain and fill plugs is 15 to Use only the manufacturer’s recommended fluid. Refer 25 ft lbs (20 to 34 N·m).
MAINTAINING YOUR VEHICLE 611 Automatic Transmission Selection Of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only the manufacturer’s recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid.
612 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission components. Such damage is not covered by the New Vehicle Limited Warranty. • Using a transmission fluid other than the manufacturer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder.
MAINTAINING YOUR VEHICLE 613 6. Remove the dipstick again, and note the fluid level on both sides. The fluid level should be between the “HOT” (upper) reference holes on the dipstick at normal operating temperature. The fluid level is only valid if there is a solid coating of oil on both sides of the dipstick. If the fluid is low, add as required into the dipstick tube. Do To check the fluid level properly, the following procedure not overfill.
614 MAINTAINING YOUR VEHICLE CAUTION! Be aware that if the fluid temperature is below 50°F (10°C) it may not register on the dipstick. Do not add fluid until the temperature is elevated enough to produce an accurate reading. passable in snow and ice, and those that are sprayed on trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle.
MAINTAINING YOUR VEHICLE 615 Washing • Wash your vehicle regularly. Always wash your vehicle in the shade using MOPAR威 Car Wash or a mild car wash soap, and rinse the panels completely with clear water. • If insects, tar, or other similar deposits have accumulated on your vehicle, use MOPAR威 Super Kleen Bug and Tar Remover or equivalent to remove. CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces.
616 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, Wheel And Wheel Trim Care touch them up immediately. The cost of such repairs is • All wheels and wheel trim, especially aluminum and considered the responsibility of the owner. chrome plated wheels, should be cleaned regularly • If your vehicle is damaged due to a collision or similar with a mild soap and water to prevent corrosion.
MAINTAINING YOUR VEHICLE 617 Stain Repel Fabric Cleaning Procedure – If Interior Care Use MOPAR威 Total Clean or equivalent to clean fabric Equipped Stain Repel seats may be cleaned in the following man- upholstery and carpeting. ner: Interior Trim should be cleaned starting with a damp • Remove as much of the stain as possible by blotting cloth, a damp cloth with MOPAR威 Total Clean or equivawith a clean, dry towel. lent, then MOPAR威 Spot & Stain Remover or equivalent, if absolutely necessary.
618 MAINTAINING YOUR VEHICLE taken to avoid soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean your leather upholstery. Application of a leather conditioner is not required to maintain the original condition. WARNING! To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution followed by rinsing.
MAINTAINING YOUR VEHICLE 619 Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. If the belts need cleaning, use MOPAR威 Total Clean, a mild soap solution, or lukewarm water. Do not remove the belts from the vehicle to wash them. Dry with a soft cloth. 1. Clean with a wet soft rag.
620 MAINTAINING YOUR VEHICLE FUSES Totally Integrated Power Module The Totally Integrated Power Module is located in the engine compartment. This center contains cartridge fuses and mini fuses. A description of each fuse and component may be stamped on the inside cover, otherwise the cavity number of each fuse is stamped on the inside cover that corresponds to the following chart.
MAINTAINING YOUR VEHICLE 621 Cavity Cartridge Fuse J03 30 Amp Pink J04 25 Amp Natural J05 25 Amp Natural J06 40 Amp Green J07 J08 J09 30 Amp Pink 40 Amp Green 30 Amp Pink Mini Fuse Description Trailer Tow Driver Door Node Passenger Door Node Antilock Brakes Pump/Stability Control System Antilock Brakes Valve/Stability Control System Power Seat E-Brake Cavity Cartridge Fuse J10 30 Amp Pink J11 30 Amp Pink J12 30 Amp Pink J13 60 Amp Yellow J14 20 Amp Blue J15 40 Amp Green J17 40 Amp Green Mini Fuse De
622 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse J18 20 Amp Blue J19 J20 J21 J22 M1 Mini Fuse Description Powertrain Control Module/Powertrain Control Module Transmission Range Radiator Fan Motor HI/Radiator Fan Motor Low Front Wiper 60 Amp Yellow 30 Amp Pink 20 Amp Blue 25 Amp Natural 15 Amp Blue Cavity Cartridge Fuse M2 M3 M5 M6 Front/Rear Washer Control Sunroof Module M7 Stop Lamp M9 M8 M10 Mini Fuse 20 Amp Yellow 20 Amp Yellow 25 Amp Natural 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 20
MAINTAINING YOUR VEHICLE 623 Cavity Cartridge Fuse M11 M12 M13 M14 M15 Mini Fuse 10 Amp Red 30 Amp Green 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow Description Heating, Ventilation & Air Conditioning (Climate Control System) Radio/Amplifier Cavity Cartridge Fuse M16 M18 M19 Instrument Cluster M20 Back Up Camera M21 Power Seat Module(s)/Adaptive Cruise Control/Audio Telematics/Daytime Running Lights Relay/Air Suspension Module/Instrument Cluster M22 M23 M24 Mini Fuse 10 Amp Red 15 Amp Blue 25 Amp Natu
624 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse M25 M26 M27 Mini Fuse 20 Amp Yellow 10 Amp Red 10 Amp Red M28 15 Amp Blue M29 10 Amp Red 15 Amp Blue M30 Description Fuel Pump Motor Output/Diesel Lift Pump (Export Only) Driver Door Switch Bank Ignition Switch/ Wireless Control Module/Keyless Entry Module Powertrain Controller/ Transmission Controller Tire Pressure Monitor J1962 Diag Connector Cavity Cartridge Fuse M31 M32 M33 Mini Fuse 20 Amp Yellow 10 Amp Red 10 Amp Red M34 10 Amp Red M35
MAINTAINING YOUR VEHICLE 625 Cavity Cartridge Fuse M37 M38 Mini Fuse 10 Amp Red 25 Amp Natural Description Antilock Brakes/ Stability Control System Module/ Stoplamp Switch Sensor All Door Lock &Unlock CAUTION! • When installing the totally integrated power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the totally integrated power module and possibly result in a electrical system failure.
626 MAINTAINING YOUR VEHICLE • Anytime you store your vehicle, or keep it out of service (i.e. vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. Exterior Lights Bulb Type Headlamp – High Intensity Discharge (HID) . . . . . Service at Authorized Dealer (**) Headlamp (Low Beam) . . . . . . . . .
MAINTAINING YOUR VEHICLE 627 Because of this, you should not attempt to service a headlamp bulb yourself. If a headlamp bulb fails, take your vehicle to an authorized dealer for service. NOTE: Numbers refer to commercial bulb types that can be purchased from your authorized dealer. If a bulb needs to be replaced, visit your authorized dealer or refer to the applicable Service Manual.
628 MAINTAINING YOUR VEHICLE 3. Disconnect the electrical connector and replace the bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front Turn Signal 1. Open the hood. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
MAINTAINING YOUR VEHICLE 629 CAUTION! • Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. • Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring. 4.
630 MAINTAINING YOUR VEHICLE Rear Tail, Stop, Turn Signal, And Backup Lamps 1. Raise the liftgate. 2. Remove the two push-pins from the tail lamp housing. 4. Twist socket counter clockwise and remove from lamp. 5. Pull the bulb to remove it from the socket. 6. Replace the bulb, reinstall the socket, and reattach the 3. Grasp the tail lamp and pull firmly rearward to lamp assembly. disengage the lamp from the aperture panel. Rear Liftgate Mounted Tail Lamp 1. Raise the liftgate. 2.
MAINTAINING YOUR VEHICLE 631 Center High-Mounted Stop Lamp (CHMSL) Rear License Lamp The center high-mounted stop lamp is an LED assembly. 1. Use a screw driver to gently pry against the side of the See your authorized dealer for replacement. snap tab to remove the license lamp lens. 2. Pull bulb from socket. 3. Replace bulb. 4. Reinstall lens.
632 MAINTAINING YOUR VEHICLE FLUID CAPACITIES Fuel (Approximate) 3.6L and 5.7L Engines Engine Oil with Filter 3.6L Engine (SAE 5W-30, API Certified) 5.7L Engine (SAE 5W-20, API Certified) Cooling System * 3.6L Engine (MOPAR威 Engine Coolant/Antifreeze 5-Year/100,000 Mile Formula or equivalent) – Without Trailer Tow Package 3.6L Engine (MOPAR威 Engine Coolant/Antifreeze 5-Year/100,000 Mile Formula or equivalent) – With Trailer Tow Package 3.
MAINTAINING YOUR VEHICLE 633 3.6L Engine (MOPAR威 Engine Coolant/Antifreeze 5-Year/100,000 Mile Formula or equivalent) – Front and Rear Heat With Trailer Tow Package 5.7 Liter Engine (MOPAR威 Engine Coolant/Antifreeze 5-Year/100,000 Mile Formula or equivalent) – Front and Rear Heat Without Trailer Tow Package 5.
634 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil – 3.6L Engine Engine Oil – 5.7L Engine Engine Oil Filter Spark Plugs – 3.6L Engine Spark Plugs – 5.7L Engine Fuel Selection – 3.6L Engine Fuel Selection – 5.7L Engine Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent.
MAINTAINING YOUR VEHICLE 635 Chassis Component Automatic Transmission Transfer Case – 3.6L Engine Transfer Case – 5.7L Engine Axle Differential (Front-Rear) Brake Master Cylinder Power Steering Reservoir – 3.6L Engine Power Steering Reservoir – 5.7L Engine Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. Shell Automatic Transmission Fluid 3353 or equivalent. MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product.
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 638 ▫ Required Maintenance Intervals . . . . . . . . . .
M A I N T E N A N C E 638 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done S anytime a malfunction is suspected.
MAINTENANCE SCHEDULES 639 M NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated.
M A I N T E N A N C E 640 MAINTENANCE SCHEDULES Once A Month • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required. • Check the fluid levels of the coolant reservoir, brake master cylinder, power steering and transmission S C (5.7L only) and add as needed. H E • Check all lights and other electrical items for correct D operation.
MAINTENANCE SCHEDULES 641 M 8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 16,000 Miles (26,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
M 642 MAINTENANCE SCHEDULES A I 24,000 Miles (39,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 24,000 miles (39 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system. ❏ Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
MAINTENANCE SCHEDULES 643 M 40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule 48,000 Miles (78,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code ❏ Change the engine oil and engine oil filter.
M 644 MAINTENANCE SCHEDULES A I 56,000 Miles (91,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 56,000 miles (91 000 km). S C H E D U L E S 8 Odometer Reading Repair Order # Signature, Authorized Service Center Date Dealer Code 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
MAINTENANCE SCHEDULES 645 M 72,000 Miles (117,000 km) or 54 Months Maintenance Service Schedule 80,000 Miles (130,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system. ❏ Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
M 646 MAINTENANCE SCHEDULES A I 88,000 Miles (143,000 km) or N T 66 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E 88,000 miles (143 000 km).
MAINTENANCE SCHEDULES 647 M 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). Replace the engine air cleaner filter. Replace the air conditioning filter. Replace the spark plugs (3.6L Engine). Replace the spark plugs (5.7L Engine). Inspect and replace PCV valve if necessary.
M 648 MAINTENANCE SCHEDULES A I 104,000 Miles (169,000 km) or N T 78 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 104,000 miles (169 000 km). ❏ Flush and replace the engine coolant at 104,000 miles (169 000 km) or 60 months whichever comes first.
MAINTENANCE SCHEDULES 649 M 120,000 Miles (195,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏ Inspect the CV joints. ❏ Inspect exhaust system. ❏ Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing. ❏ Change the automatic transmission fluid and filter(s).
M 650 MAINTENANCE SCHEDULES A I 128,000 Miles (208,000 km) or 96 Months Maintenance Service N T Schedule E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (208 000 km). A N ❏ Replace the engine air cleaner filter. C ❏ Replace the air conditioning filter. E ❏ Replace the spark plugs (5.7L Engine).
MAINTENANCE SCHEDULES 651 M 144,000 Miles (234,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (234 000 km). ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. ❏ Replace the air conditioning filter. ❏ Inspect the brake linings, replace if necessary.
M A I N T E N A N C E S C H E D U L E S 8 652 MAINTENANCE SCHEDULES † This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 655 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 657 ▫ Prepare For The Appointment . . . . . . . . . . . 655 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 657 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 655 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
654 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 661 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 661 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 661 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 655 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
656 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 Auburn Hills, MI 48321–8004 solved with this process. Phone: (800) 423–6343 • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center P.O. Box 1621 ship. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE 657 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
658 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 659 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
660 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC vemaintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE 661 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
662 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
664 INDEX Adaptive Cruise Control (ACC) (Cruise Control) . . 208 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 519 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 514 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 590 Air Conditioner Maintenance . . . . . . . . . . . . . . . 593 Air Conditioning Filter . . . . . . . . . . . . . . . . . . . . 594 Air Conditioning Refrigerant . . . . . . . . . . . . . . . 594 Air Conditioning System . . . . . . . . . . . . . . . .
INDEX 665 Master Cylinder . . . . . . . . . . . . . . . . . . . . . 607 Fluid Level Check . . . . . . . . . . . . . . . . . 612,613 Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 Fluid Type . . . . . . . . . . . . . . . . . . . . . . . . . 611 Warning Light . . . . . . . . . . . . . . . . . . . . . . . 305 Special Additives . . . . . . . . . . . . . . . . . . . . . 611 Autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . 439,447 Brake/Transmission Interlock . . . . . . . . . .
666 INDEX Cargo Area Features . . . . . . . . . . . . . . . . . . . . . . 279 Cargo Compartment . . . . . . . . . . . . . . . . . . . . . . 279 Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 Luggage Carrier . . . . . . . . . . . . . . . . . . . . . 284 Cargo Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 Cargo Tie-Downs . . . . . . . . . . . . . . . . . . . . . . . . 281 Cellular Phone . . . . . . . . . . . . . . . . . . . . . . .
INDEX 667 Defroster, Windshield . . . . . . . . . . . . . . . . . . 100,413 Diagnostic System, Onboard . . . . . . . . . . . . . . . . 583 Dipsticks Automatic Transmission . . . . . . . . . . . . . . . . 613 Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . 587 Power Steering . . . . . . . . . . . . . . . . . . . . . . 464 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . . 574 Disposal Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 590 Used Engine Fluids . . . . . . . .
668 INDEX Electric Remote Mirrors . . . . . . . . . . . . . . . . . . . 112 Emission Control System Maintenance . . . . . . . . . 584 Electrical Outlet, Auxiliary (Power Outlet) . . . . . . 263 Engine Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 590 Electronic Brake Control System . . . . . . . . . . . . . 467 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . 429 Anti-Lock Brake System . . . . . . . . . . . . . . . . 468 Break-In Recommendations . . . . . . . . . . . . . .
INDEX 669 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 590 Engine Oil Disposal . . . . . . . . . . . . . . . . . . . 590 Finish Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615 Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 551 Hazard Warning . . . . . . . . . . . . . . . . . . . . . 551 Turn Signal . . . . . . . . . . . . . . . . 101,303,628,630 Flexible Fuel Vehicles Cruising Range . . . . . . . . . . . . . . . . . . . . . . 518 Engine Oil . . . . . .
670 INDEX Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 587 Power Steering . . . . . . . . . . . . . . . . . . . . . . 464 Fluids, Lubricants and Genuine Parts . . . . . . . . . . 634 Fog Light Service . . . . . . . . . . . . . . . . . . . . . . . . 628 Fog Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 303,628 Folding Rear Seat . . . . . . . . . . . . . . . . . . . . . 174,177 Forward Collision Warning . . . . . . . . . . . 232,318,337 Four-Way Hazard Flasher . . . . . . . . . .
INDEX 671 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . 304 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 299 Gear Ranges . . . . . . . . . . . . . . . . . . . . . . . . 433,441 Gear Select Lever Override . . . . . . . . . . . . . . . . . 573 General Information . . . . . . . . . . . . 20,29,153,229,510 Glass Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 618 Gross Axle Weight Rating . . . . . . . . . . . . . . . 523,526 Gross Vehicle Weight Rating . . . . . . . .
672 INDEX Instrument Panel and Controls . . . . . . . . . . . . . . 297 Instrument Panel Lens Cleaning . . . . . . . . . . . . . 619 Integrated Power Module (Fuses) . . . . . . . . . . . . 620 Interior Appearance Care . . . . . . . . . . . . . . . . . . 617 Intermittent Wipers (Delay Wipers) . . . . . . . . . . . 199 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Inverter, Power . . . . . . . . . . . . . . . . . . . . . . . . . 268 Jack Location . . . . . . . . . . . . . . . . . .
INDEX 673 Rear Tail . . . . . . . . . . . . . . . . . . . . . . . . . . . 630 Bulb Replacement . . . . . . . . . . . . . . . . . . . . 627 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . 307 Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 Security Alarm (Theft Alarm) . . . . . . . . . . . . 305 Center Mounted Stop . . . . . . . . . . . . . . . . . . 631 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 627 Daytime Running . . . . . . . . . . . . . . . . . . . .
674 INDEX Lower Anchors and Tether for CHildren (LATCH) . . . . . . . . . . . . . . . . . . . . . 85,87 Lubrication, Body . . . . . . . . . . . . . . . . . . . . . . . 595 Luggage Rack (Roof Rack) . . . . . . . . . . . . . . . . . 284 Electric Remote . . . . . . . . . . . . . . . . . . . . . . 112 Exterior Folding . . . . . . . . . . . . . . . . . . . . . 112 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Rearview . . .
INDEX 675 Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Off-Pavement Driving (Off-Road) . . . . . . . . . . . . 457 Off-Road Driving (Off-Pavement) . . . . . . . . . . . . 457 Oil Change Indicator . . . . . . . . . . . . . . . . . . . . . 322 Oil Change Indicator, Reset . . . . . . . . . . . . . . . . . 322 Oil, Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 587 Capacity . . . . . . . . . . . . . .
676 INDEX Placard, Tire and Loading Information . . . . . . . . . 484 Polishing and Waxing . . . . . . . . . . . . . . . . . . . . . 615 Power Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . 35 Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 Lift Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Outlet (Auxiliary Electrical Outlet) . . . . . . . . 263 Seats . . . . . . . . . . . . . . . . . . . .
INDEX 677 Rearview Mirrors . . . . . . . . . . . . . . . . . . . . . . . . 110 Reclining Front Seats . . . . . . . . . . . . . . . . . . . . . 164 Recorder, Event Data . . . . . . . . . . . . . . . . . . . . . . 80 Recreational Towing . . . . . . . . . . . . . . . . . . . . . . 540 Shifting into Transfer Case Neutral (N) . . . . . 543 Shifting out of Transfer Case Neutral (N) . . . . 546 Reformulated Gasoline . . . . . . . . . . . . . . . . . . . . 512 Refrigerant . . . . . . . . . . . . . . . . . . . . .
678 INDEX Child Restraint . . . . . . . . . . . . . . . . . . . 81,82,91 Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Front Seat . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 619 Pretensioners . . . . . . . . . . . . . . . . . . . . . . . . 60 Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . 307 Shoulder Belt Anchorage . . . . . . . . . . .
INDEX 679 Shoulder Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Side Airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Signals, Turn . . . . . . . . . . . . . . . . . . . 101,303,628,630 SmartBeams . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . 497 Snow Plow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 539 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498 Spare Tire . .
680 INDEX Synthetic Engine Oil . . . . . . . . . . . . . . . . . . . . . . 589 System, Remote Starting . . . . . . . . . . . . . . . . . . . . 29 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 Telescoping Steering Column . . . . . . . . . . . . . 202,203 Temperature Control, Automatic (ATC) . . . . . . . . 408 Temperature Gauge, Engine Coolant . . . . . . . . . . 308 Tether Anchor, Child Restraint . . . . . . . . . . . . . . . 85 Text Messaging . . . . . . . . . . . . . . . . . . .
INDEX 681 Tongue Weight/Trailer Weight . . . . . . . . . . . . . . 532 Tow Hooks, Emergency . . . . . . . . . . . . . . . . . . . 573 Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525,574 24-Hour Towing Assistance . . . . . . . . . . . . . 137 Disabled Vehicle . . . . . . . . . . . . . . . . . . . . . 574 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 Recreational . . . . . . . . . . . . . . . . . . . . . . . . 540 Weight . . . . . . . . . . . . . . . . . . . . . . . .
682 INDEX Uniform Tire Quality Grades . . . . . . . . . . . . . . . . 661 Universal Consumer Interface (UCI) Connector . . . 364 Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 250 Untwisting Procedure, Seat Belt . . . . . . . . . . . . . . 56 Upholstery Care . . . . . . . . . . . . . . . . . . . . . . . . 617 Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . 328 Vehicle Certification Label . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
2012 Durango 2012 OWNER’S MANUAL Chrysler Group LLC 12WD01-126-AF Sixth Edition Printed in U.S.A.
