Owner`s manual

CAUTION!

Do not attempt to shift when the drive wheels are

spinning and do not have traction. Damage to the

transmission may occur.

Launch RPM Set (Manual Transmission Only)

When selected, this screen displays the vehicle’s current

Launch RPM used for Launch Control (see ESC Operat-

ing Modes – Launch Control).

• This feature will only function when the vehicle is

stationary.

• Pressing the SELECT button will bring up a list of

available rpm values to use with Launch Control.

• Scroll to the desired launch rpm value using the

up/down arrow buttons and press the SELECT button

to set the launch rpm to the desired value.

• The newly chosen launch rpm will then be displayed.

When Launch Control is activated, the engine speed

will hold at the newly chosen launch rpm.

NOTE: Launch mode is not available within the first 500

miles of engine break-in.

DRIVING ON SLIPPERY SURFACES

Acceleration

Rapid acceleration on snow covered, wet, or other slip-

pery surfaces may cause the driving wheels to pull

erratically to the right or left. This phenomenon occurs

when there is a difference in the surface traction under

the rear (driving) wheels.

STARTING AND OPERATING 319