Owner`s manual

Power Lumbar

• Push the switch forward to increase the

lumbar support. Push the switch rearward

to decrease the lumbar support.

• Pushing upward or downward on the

switch will raise and lower the position of

the support.

Memor y Seat

• The memory seat feature allows you to

save two different driver seating positions

(excluding lumbar position), outside mir-

rors, tilt/telescoping steering column po-

sition, and radio station preset settings.

The memory seat buttons are located on

the driver's door panel.

• Adjust all memory profile settings, press

the SET button then press 1 or 2 within five

seconds.

• To program a remote keyless entry (RKE)

transmitter to a memory position, you

must select the “Personal Settings Linked To Key Fob” feature within “Doors & Locks”

through the Uconnect® system screen. Refer to Programmable Features in the Electron-

ics section of this guide.

• Place the ignition in the OFF position, select the desired memory profile (1) or (2). Once

the profile has been recalled, press and release the SET (S) button on the memory switch,

then press and release button (1) or (2) accordingly. Press and release the LOCK button on

the RKE transmitter within 10 seconds.

• To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on the

programmed RKE transmitter.

• Refer to the Owner's Manual on the DVD for further details.

GETTING STARTED