Owner`s manual

SPEED CONTROL

• The speed control switches are located

on the right side of the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button

to activate

the Speed Control.

• CRUISE CONTROL READY will appear on

the instrument cluster to indicate the

Speed Control is on.

• Push the ON/OFF button

a second

time to turn the system off. CRUISE CON-

TROL OFF will appear on the instrument

cluster to indicate the Speed Control is off.

SET

• With the Speed Control on, push and release the SET+ or SET- button to set a desired

speed.

• Once a speed has been set a message CRUISE CONTROL SET TO MPH/KM will appear

indicating what speed was set. An indicator CRUISE will also appear and stay on in the

instrument cluster when the speed is set.

Accel/Decel

• Once a speed is set, pushing the SET + button once or the SET – button once will increase

or decrease the set speed approximately 1 mph (1 km/h).

• Push and hold the SET + button to accelerate in 5 mph (10 km/h) increments or push and

hold the SET – button to decelerate in 5 mph (10 km/h) increments; release the button to

save the new set speed.

Resume

• To resume a previously selected set speed in memory, push the RES button and release.

Cancel

• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain the

set speed memory.

• Push the ON/OFF button to turn the system off and erase the set speed memory.

OPERATING YOUR VEHICLE