Owner`s manual

Changing Modes (ACC Only)

• If desired, the Adaptive Cruise Control mode can be turned off and the system can be

operated as a normal (fixed speed) Cruise Control mode. When in the normal (fixed

speed) Cruise Control mode the distance setting feature will be disabled and the system

will maintain the speed you set.

• To change between the different cruise control modes, press the ADAPTIVE CRUISE

CONTROL (ACC)ON/OFF button which turns the ACC and the normal (fixed speed) control

OFF. Pressing of the NORMAL (Fixed Speed) CRUISE CONTROL ON/OFF button will result

in turning ON (changing to) the Normal (Fixed Speed) Cruise Control mode.

• Refer to your Owner's Manual on the DVD for further information.

Forward Collision Warning (FCW) With Mitigation

• The Forward Collision Warning (FCW) system with mitigation provides the driver with

audible warnings, visual warnings (within the EVIC), and may apply a brake jerk to warn

the driver when it detects a potential frontal collision. The warnings and limited autono-

mous braking are intended to provide the driver with enough time to react, avoid or

mitigate the potential collision.

Turning FCW ON Or OFF

NOTE:

The default status of FCW is “On”, this allows the system to warn you of a possible collision

with the vehicle in front of you when you are farther away and it applies limited braking. This

gives you the most reaction time to avoid a possible collision.

• The forward collision button is located below the climate controls, on the switch panel.

• To turn the FCW system OFF, press the forward collision button once to turn the system

OFF (led turns on).

• To turn the FCW system back ON, press the forward collision button again to turn the

system ON (led turns off).

Changing FCW Status

• The FCW feature has three settings and can be changed within the Uconnect® System

Screen:

•Far

• Near

• Off

NOTE:

The FCW and active braking settings can only be changed when the vehicle is in PARK .

OPERATING YOUR VEHICLE