Owner`s manual

Uconnect® 5.0
Setting the Time
1. Press the More hard-key on the right side of the display, next press the Settings soft-key
and then the Time soft-key. OR Press the Settings hard-key on the right side of the
display, then press the Clock soft-key. The Time setting screen is displayed and the clock
can be adjusted as described in the following procedure.
NOTE:
In the Clock Setting Menu you can also select Display Clock. Display Clock turns the clock
display in the status bar on or off.
2. Touch the Up or Down arrows to adjust the hours or minutes, next select the AM or PM
soft-key. You can also select 12hr or 24hr format by touching the desired soft-key.
3. Once the time is set press the “Done” soft-key to exit the time screen.
Equalizer, Balance and Fade
1. Press the SETTINGS hard-key on the right side of the unit.
2. Then scroll down and press the Audio soft-key to get to the Audio menu.
3. The Audio Menu shows the following options for you to customize your audio settings.
Equalizer
• Touch the Equalizer soft-key to adjust the Bass, Mid and Treble. Use the + or - soft-key to
adjust the equalizer to your desired settings. Press the back arrow soft-key when done.
ELECTRONICS
65