Owner`s manual

WARNING!
In the Normal (Fixed Speed) Cruise Control mode,
the system will not react to vehicles ahead. Be sure to
maintain a safe distance between your vehicle and
the vehicle ahead. Always be aware which mode is
selected. Failure to follow these warnings can result
in a collision and death or serious personal injury.
To Set A Desired Speed
Turn the Normal (Fixed Speed) Cruise Control ON.
When the vehicle has reached the desired speed, press
the SET (+) or SET (-) button and release. Release the
accelerator and the vehicle will operate at the selected
speed. Once a speed has been set a message CRUISE
CONTROL SET TO MPH/KM will appear indicating
what speed was set. An indicator CRUISE will also
appear and stay on in the instrument cluster when the
speed is set.
To Vary The Speed Setting
When the Normal (Fixed Speed) Cruise Control is set,
you can increase speed by pushing the SET (+) button. If
the button is continually pressed, the set speed will
continue to increase until the button is released, then the
new set speed will be established.
Pressing the SET (+) button once will result ina1mph
(1 km/h) increase in set speed. Each subsequent tap of
the button results in an increase of 1 mph (1 km/h).
While the Normal (Fixed Speed) Cruise Control is set,
you can increase the set speed by pressing and holding
the SET + button. If the button is continually pressed, the
set speed will continue to increase in 5 mph (10 km/h)
increments until the button is released. The increase in set
speed is reflected in the EVIC display.
To decrease speed while the Normal (Fixed Speed) Cruise
Control is set, push the SET (-) button. If the button is
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE