Owner`s manual
continually held in the SET (-) position, the set speed will
continue to decrease until the button is released. Release
the button when the desired speed is reached, and the
new set speed will be established.
Pressing the SET (-) button once will result ina1mph
(1 km/h) decrease in set speed. Each subsequent tap of
the button results in a decrease of 1 mph (1 km/h).
While the Normal (Fixed Speed) Cruise Control is set, the
set speed can be decreased by pressing and holding the
SET - button. If the button is continually pressed, the set
speed will continue to decrease in 5 mph (10 km/h)
increments until the button is released. The decrease in
set speed is reflected in the EVIC display.
To Cancel
The following conditions will cancel the Normal (Fixed
Speed) Cruise Control without clearing the memory:
• You softly tap or depress the brake pedal.
• You press the CANCEL button.
• The Electronic Stability Control/Traction Control Sys-
tem (ESC/TCS) activates.
• The vehicle parking brake is applied.
• The braking temperature exceeds normal range (over-
heated).
• The shift lever is removed from the Drive position.
To Resume Speed
To resume a previously set speed, push the RES button
and release. Resume can be used at any speed above
20 mph (32 km/h).
To Turn Off
The system will turn off and erase the set speed in
memory if:
• You push the Normal Fixed Speed ON/OFF button.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217