User Guide Instruction Manual

U.S. Speed (mph)
•PushingtheSET+ button once will result in a 1 mph increase in set speed. Each
subsequent tap of the button results in an increase of 1 mph.
•Ifthebuttoniscontinuallypushed,thesetspeedwillcontinuetoincreasein5mph
increments until the button is released. The increase in set speed is reflected in the
DID.
Metric Speed (km/h)
•PushingtheSET+ button once will result in a 1 km/h increase in set speed. Each
subsequent tap of the button results in an increase of 1 km/h.
•Ifthebuttoniscontinuallypushed,thesetspeedwillcontinuetoincreasein10km/h
increments until the button is released. The increase in set speed is reflected in the
DID.
To Decrease Speed
While ACC is set, the set speed can be decreased by pushing the SET - button.
The drivers preferred units can be selected through the instrument panel settings if
equipped. Refer to “Understanding Your Instrument Panel” in the Owner’s Manual on the
DVD for more information. The speed increment shown is dependant on the speed of U.S.
(mph) or Metric (km/h) units:
U.S. Speed (mph)
•PushingtheSET- button once will result in a 1 mph decrease in set speed. Each
subsequent tap of the button results in a decrease of 1 mph.
•Ifthebuttoniscontinuallypushed,thesetspeedwillcontinuetodecreasein5mph
decrements until the button is released. The decrease in set speed is reflected in the
DID.
Metric Speed (km/h)
•PushingtheSET- button once will result in a 1 km/h decrease in set speed. Each
subsequent tap of the button results in a decrease of 1 km/h.
•Ifthebuttoniscontinuallypushed,thesetspeedwillcontinuetodecreasein10km/h
decrements until the button is released. The decrease in set speed is reflected in the
DID.
NOTE:
•WhenyouoverrideandpushtheSET+ button or SET - buttons, the new Set Speed will
be the current speed of the vehicle.
•WhenyouusetheSET- button to decelerate, if the engine’ s braking power does not
slow the vehicle sufficiently to reach the set speed, the brake system will automatically
slow the vehicle.
•TheACCsystemappliesthebrakedowntoafullstopwhenfollowingatargetvehicle.
If an ACC host vehicle follows a target vehicle to a standstill, the host vehicle will release
the vehicle brakes two seconds after coming to a full stop.
OPERATING YOUR VEHICLE
42