User Guide Instruction Manual

•TheACCsystemmaintainssetspeedwhendrivinguphillanddownhill.However,a

slight speed change on moderate hills is normal. In addition, downshifting may occur

while climbing uphill or descending downhill. This is normal operation and necessary

to maintain set speed. When driving up hill and down hill, the ACC system will cancel

if the braking temperature exceeds normal range (overheated).

Distance Setting (ACC Only)

The specified following distance for ACC can be set by varying the distance setting

between four bars (longest), three bars (long), two bars (medium) and one bar (short).

Using this distance setting and the vehicle speed, ACC calculates and sets the distance

to the vehicle ahead. This distance setting displays in the DID.

•Toincreasethedistancesetting,pushtheDistanceSetting—Increasebuttonand

release. Each time the button is pushed, the distance setting increases by one bar

(longer).

•Todecreasethedistancesetting,pushtheDistanceSetting—Decreasebuttonand

release. Each time the button is pushed, the distance setting decreases by one bar

(shorter).

Changing Modes (ACC Only)

If desired, the Adaptive Cruise Control mode can be turned off and the system can be

operated as a normal (Fixed Speed) Speed Control mode. When in the normal (Fixed

Speed) Speed Control mode the distance setting feature will be disabled and the system

will maintain the speed you set.

•Tochangebetweenthedifferentcruisecontrolmodes,pushtheADAPTIVECRUISE

CONTROL (ACC) ON/OFF button which turns the ACC and the normal (Fixed Speed)

Speed Control OFF.

•Pushingthenormal(FixedSpeed)SPEEDCONTROLON/OFFbuttonwillresultin

turning ON (changing to) the normal (Fixed Speed) Speed Control mode.

Refer to your Owner's Manual on the DVD for further information.

OPERATING YOUR VEHICLE