2015 Charger SRT 392 / SRT Hellcat Chrysler Group LLC 15D482-126-AA First Edition Rev 1 Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated nondrinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTENTS ! INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .4 ! VEHICLE IDENTIFICATION NUMBER . . . . . . . .6 ! HOW TO USE THIS MANUAL . . . . . . . . . . . . . .4 ! VEHICLE MODIFICATIONS/ALTERATIONS . . . .7 ! WARNINGS AND CAUTIONS . . . . . . . . . . . . . .
4 INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained techLLC vehicle. Be assured that it represents precision nicians and genuine parts, and cares about your satisfaction. workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
INTRODUCTION 5 1
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information. Observe all Warnings and Cautions. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS ! A WORD ABOUT YOUR KEYS . . . . . . . . . . . . .12 ▫ Rearming Of The System . . . . . . . . . . . . . . . . .18 ▫ Keyless Ignition Node (KIN) . . . . . . . . . . . . . .12 ▫ To Arm The System . . . . . . . . . . . . . . . . . . . .19 ▫ SRT Key Fobs . . . . . . . . . . . . . . . . . . . . . . . . .13 ▫ To Disarm The System . . . . . . . . . . . . . . . . . . .19 ▫ Ignition Or Accessory On Message . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Programming Additional Transmitters . . . . . . .24 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . .42 ▫ Transmitter Battery Replacement . . . . . . . . . . .24 ! TRUNK LOCK AND RELEASE . . . . . . . . . . . . .42 ▫ General Information . . . . . . . . . . . . . . . . . . . .25 ! TRUNK SAFETY WARNING. . . . . . . . . . . . . . . .43 ! REMOTE STARTING SYSTEM — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ! SAFETY TIPS . . . . . . . . . . . . . . . . . . . . . . . . . .96 ▫ Transporting Passengers. . . . . . . . . . . . . . . . . .96 ▫ Exhaust Gas . . . . . . . . . . . . . . . . . . . . . . . . .97 ▫ Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 ▫ Periodic Safety Checks You Should Make Outside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Keyless Ignition Node (KIN System) has four operating positions, three of which are labeled and will Your vehicle uses a keyless ignition system. This system illuminate when in position. The three positions are: OFF, consists of a Key Fob with Remote Keyless Entry (RKE) ACC, and ON/RUN. The fourth position is START. transmitter and a Keyless Ignition Node (KIN). During start, ON/RUN will illuminate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 SRT Key Fobs NOTE: SRT vehicles equipped with the 6.2L Supercharged engine comes with three key fobs (two red and one black) that allow for different engine power levels. Please refer to the #Drive Modes# in the “Uconnect Settings” section for further descriptions. The Key Fob also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove the emergency key, slide the mechanical latch on the back of the Key Fob sideways with your thumb and then pull the key out with your other hand. Emergency Key Removal NOTE: You can insert the double-sided emergency key into the lock cylinders with either side up.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 you to cycle the ignition to OFF. In addition to the chime, the ignition or accessory on message will display in the cluster. NOTE: With the Uconnect® system, the power window switches, radio, power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition is placed in the OFF position. Opening either front door will cancel this feature. The time for this feature is programmable.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! An unlocked car is an invitation to thieves. Always remove the Key Fob from vehicle, place the ignition in the OFF and lock all doors when leaving the vehicle unattended. SENTRY KEY® The Sentry Key® Immobilizer system prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 CAUTION! CAUTION! The Sentry Key® Immobilizer system is not compatible with some aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. • Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unattended. • For vehicles equipped with Keyless Enter-N-Go™, always remember to place the ignition in the OFF position.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Key Programming VEHICLE SECURITY ALARM — IF EQUIPPED Programming Key Fobs or RKE transmitters may be The Vehicle Security Alarm monitors the vehicle doors performed at an authorized dealer. for unauthorized entry and the Keyless Enter-N-Go™ START/STOP button for unauthorized operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 To Arm The System Follow these steps to arm the Vehicle Security Alarm: • Push the LOCK button on the Remote Keyless Entry (RKE) transmitter. 3. If any doors are open, close them. 1. Make sure the vehicles ignition is placed in the “OFF” position (refer to #Starting Procedures# in #Starting To Disarm The System And Operating# for further information). The Vehicle Security Alarm can be disarmed using any of • Make sure the vehicle ignition system is OFF.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: exterior lights will flash, the horn will sound. If this occurs, disarm the Vehicle Security Alarm. • The driver’s door key cylinder and the trunk button on the RKE transmitter cannot arm or disarm the Vehicle Security System Manual Override Security Alarm. The Vehicle Security Alarm will not arm if you lock the • When the Vehicle Security Alarm is armed, the interior doors using the manual door lock plunger.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 NOTE: Driving at speeds 5 mph (8 km/h) and above disables the system from responding to all RKE transmit• The front courtesy overhead console and door courter buttons for all RKE transmitters. tesy lights will turn on if the dimmer control is in the “Dome ON” position (extreme top position). NOTE: • The Illuminated Entry system will not operate if the dimmer control is in the “Dome defeat” position (extreme bottom position).
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock The Doors Flash Lights With Lock Push and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice within five seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. This feature will cause the turn signal lights to flash when the doors are locked with the RKE transmitter. This feature can be turned on or turned off.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 If the vehicle is equipped with Passive Entry, refer to Using The Panic Alarm “Keyless Enter-N-Go™” under “Things To Know Before To turn the Panic Alarm feature on or off, push and hold Starting Your Vehicle” for further information. the PANIC button on the RKE transmitter for at least one second and release.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • You may need to be less than 35 ft (11 m) from the 1. Remove the emergency key by sliding the mechanical latch on the back of the RKE transmitter sideways vehicle when using the RKE transmitter to turn off the with your thumb and then pull the key out with your Panic Alarm due to the radio frequency noises emitted other hand. by the system. Programming Additional Transmitters Programming Key Fobs or RKE transmitters may be performed at an authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 2. Separating RKE halves requires screw removal, if 3. Remove the battery by turning the back cover over equipped, and gently prying the two halves of the (battery facing downward) and tapping it lightly on a RKE transmitter apart. Make sure not to damage the solid surface such as a table or similar, then replace the seal during removal. battery.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • This device must accept any interference received, REMOTE STARTING SYSTEM — IF EQUIPPED including interference that may cause undesired operation. This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conveNOTE: Changes or modifications not expressly approved niently from outside the vehicle while still by the party responsible for compliance could void the maintaining security.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 How To Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in PARK • Doors closed • Hood closed • Hazard switch off • Brake switch inactive (brake pedal not pushed) • Battery at an acceptable charge level • RKE PANIC button not pushed • System not disabled from previous remote start event • Vehicle security alarm not active • Ignition in Off position (Keyless Enter-N-Go™) WARNING! • Do not start
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: To Exit Remote Start Mode Without Driving The Vehicle • If an engine fault is present, the vehicle will start and Push and release the REMOTE START button one time or then shut down 10 seconds later. allow the engine to run for the entire 15-minute cycle. • The park lamps will turn on and remain on during NOTE: To avoid unintentional shut downs, the system Remote Start mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 NOTE: For vehicles equipped with the Keyless Enter-N- DOOR LOCKS Go™ feature, the message “Push Button/Insert Key” will Manual Door Locks display in the Driver Information Display (DID) until To lock each door, push the door lock knob on each door trim you push the START button. panel downward. To unlock the front doors, pull the inside Cancel Remote Start door handle to the first detent.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the door lock knob is down when you shut the door, the door will lock. Therefore, make sure the Key Fob is not inside the vehicle before closing the door. WARNING! • For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 information, refer to “Keyless Enter-N-Go™” under A power door lock switch is on each front door trim “Things To Know Before Starting Your Vehicle” for further information. panel. Use this switch to lock or unlock the doors. If you push the power door lock switch while the ignition is in the ACC or ON/RUN position, and any front door is open, the power locks will not operate. This prevents you from accidentally locking the Key Fob in the vehicle.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Unlock Doors On Exit Child-Protection Door Lock System — Rear The doors will unlock automatically on vehicles with Doors To provide a safer environment for small children riding power door locks if: in the rear seats, the rear doors are equipped with 1. The Automatic Unlock Doors On Exit feature is enChild-Protection Door Lock system. abled. To Engage Or Disengage The Child-Protection 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 2 Child-Protection Door Lock Location Child-Protection Door Lock Function WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For emergency exit with the system engaged, • If the vehicle is unlocked by the Passive Entry Door Handle, and no door goes ajar within 60 seconds, the move the lock knob up (unlocked position), roll down the vehicle will re-lock and if equipped, will arm the window and open the door with the outside door handle. security alarm.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 To Unlock From The Passenger Side: With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors automatically. The interior door panel lock knob will raise when the door is unlocked.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE FOBIK-Safe only executes in vehicles with passive entry. NOTE: The vehicle will only unlock the doors when a There are three situations that trigger a FOBIK-Safe valid Passive Entry RKE transmitter is detected inside the search in any passive entry vehicle. vehicle, and no valid Passive Entry RKE transmitter is detected outside the vehicle. The vehicle will not unlock 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 To Lock The Vehicle’s Doors With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handles, push the door handle LOCK button to lock all four doors.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do NOT grab the door handle when pushing the door NOTE: handle button. This could unlock the door(s). • After pushing the door handle button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking. • The Passive Entry system will not operate if the RKE transmitter battery is dead.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: For vehicles equipped with the Uconnect®, the power window switches will remain active for up to 10 minutes after the ignition is placed in the OFF position. Opening either front door will cancel this feature. The time is programmable. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To close the window part way, lift the window switch to the first detent and release it when you want the window The driver door power window switch and some model to stop. passenger door power window switches have an AUTOdown feature. Push the window switch to the second NOTE: detent, release, and the window will go down automati• If the window runs into any obstacle during autocally.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Reset Auto-Up Should the Auto Up feature stop working, the window may need to be reset. To reset Auto Up: push and release the window lockout button again (setting it in the UP position). 2 1. Make sure the door is fully closed. 2. Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed. 3.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, then open the front and rear windows together to minimize the buffeting.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 With the ignition in the ON/RUN position, the Trunk TRUNK SAFETY WARNING Open symbol will display in the instrument cluster indicating that the trunk is open. The odometer display WARNING! will reappear once the trunk is closed. Do not allow children to have access to the trunk, With the ignition in the OFF position , the Trunk Open either by climbing into the trunk from outside, or symbol will display until the trunk is closed.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Emergency Release OCCUPANT RESTRAINT SYSTEMS As a security measure, a Trunk Internal Emergency Release lever is built into the trunk latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be simply opened by pulling on the glow-in-thedark handle attached to the trunk latching mechanism.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 2. If a child from 2 to 12 years old (not in a rear-facing 6. All occupants should always wear their lap and child restraint) must ride in the front passenger seat, shoulder belts properly. move the seat as far back as possible and use the 7. The driver and front passenger seats should be moved proper child restraint. (Refer to “Child Restraints”) back as far as practical to allow the Advanced Front 3.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Never place a rear-facing child restraint in front of an air bag. A deploying Passenger Advanced Front Air Bag can cause death or serious injury to a child 12 years or younger, including a child in a rearfacing child restraint. • Only use rear-facing child restraint in a vehicle with a rear seat. ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 After the sequence completes, the Seat Belt Reminder Light remains illuminated until the respective seat belts are buckled. The driver should instruct all other occupants to buckle their seat belts. If an outboard front seat belt is unbuckled while traveling at speeds greater than 5 MPH (8 km/h), BeltAlert will provide both audio and visual notification.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, the air bags won’t deploy at all. Always wear your seat belt even though you have air bags. • In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 WARNING! (Continued) WARNING! (Continued) • A lap belt worn too high can increase the risk of injury in a collision. The seat belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap part of your seat belt as low as possible and keep it snug. • A twisted seat belt may not protect you properly. In a collision, it could even cut into you. Be sure the seat belt is flat against your body, without twists.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. You are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together. • A frayed or torn seat belt could rip apart in a collision and leave you with no protection. Inspect the seat belt system periodically, checking for cuts, frays, or loose parts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 2 Positioning The Lap Belt Inserting Latch Plate Into Buckle 4. Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Position the shoulder belt across the shoulder and 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of chest with minimal, if any slack so that it is comfortthe latch plate. able and not resting on your neck. The retractor will withdraw any slack in the shoulder belt. 4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no longer twisted. 6.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing or squeezing the release button. To verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage until it is locked into position.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • ONLY use a Seat Belt Extender if it is physically required in order to properly fit the original seat belt system. DO NOT USE the Seat Belt Extender if, when worn, the distance between the front edge of the Seat Belt Extender buckle and the center of the occupant’s body is LESS than 6 inches. • Using a Seat Belt Extender when not needed can increase the risk of serious injury or death in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 The pretensioners are triggered by the Occupant Re- Restraints” section of this manual. The table below straint Controller (ORC). Like the air bags, the preten- defines the type of feature for each seating position. sioners are single use items. A deployed pretensioner or a deployed air bag must be replaced immediately.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the passenger seating position is equipped with an ALR and is being used for normal usage, only pull the seat belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate the ALR. If the ALR is activated, you will hear a ratcheting sound as the seat belt retracts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 How To Disengage The Automatic Locking Mode Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode. WARNING! • The seat belt assembly must be replaced if the switchable Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee Impact Bolsters • Advanced Front Air Bags words “SRS AIRBAG” or “AIRBAG” are embossed on the air bag covers. • Supplemental Side Air Bags • Supplemental Knee Air Bags • Front and Side Impact Sensors • Seat Belt Pretenioners • Seat Belt Buckle Switch • Seat Track Position Sensors Advanced Front Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat belt restraint systems.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Never place a rear-facing child restraint in front of an air bag.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • No objects should be placed over or near the air bag on the instrument panel or steering wheel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bags to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 On the other hand, depending on the type and location of impact, Advanced Front Air Bags may deploy in crashes with little vehicle front-end damage but that produce a severe initial deceleration. way as the air bags inflate to their full size. The Advanced Front Air Bags fully inflate in less time than it takes to blink your eyes. The air bags then quickly deflate while helping to restrain the driver and front passenger.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Driver Knee Air Bag This vehicle is equipped with a Supplemental Driver Knee Air Bag mounted in the instrument panel below the steering column. The Supplemental Driver Knee Air Bag provides enhanced protection during a frontal impact by working together with the seat belts, pretensioners, and Advanced Front Air Bags. Supplemental Side Air Bags Your vehicle is equipped with two types of side air bags: 1.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 When the SAB deploys, it opens the seam on the out- 2. Supplemental Side Air Bag Inflatable Curtains board side of the seatback’s trim cover. The inflating SAB (SABICs): Located above the side windows. The trim deploys through the seat seam into the space between the covering the SABICs is labeled “SRS AIRBAG” or occupant and the door. The SAB moves at a very high “AIRBAG.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SABICs may help reduce the risk of head injury to front and rear seat outboard occupants. SABICs may reduce the risk of injuries in certain side impact and vehicle rollover events, in addition to the injury reduction potential provided by the seat belts and body structure. The SABICs deploy downward, covering the side windows. An inflating SABIC pushes the outside edge of the trim out of the way and covers the window.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 The SABICs and SABs (“Side Air Bags”) are designed to activate in certain side impacts and certain rollover events. The Occupant Restraint Controller (“ORC”) determines whether the deployment of the Side Air Bags in a particular side impact or rollover event is appropriate, based on the severity and type of collision. Vehicle damage by itself is not a good indicator of whether or not Side Air Bags should have deployed.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Relying on the Side Air Bags alone could lead to more severe injuries in a collision. The Side Air Bags work with your seat belt to restrain you properly. In some collisions, Side Air Bags won’t deploy at all. Always wear your seat belt even though you have Side Air Bags. deploys the left Side Air Bags only and a right side impact deploys the right Side Air Bags only.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 event may be in progress and whether deployment is • The air bag material may sometimes cause abrasions and/or skin reddening to the occupants as the air bags appropriate. A slower-developing event may deploy the deploy and unfold. The abrasions are similar to fricseat belt pretensioners on both sides of the vehicle. A tion rope burns or those you might get sliding along a faster-developing event may deploy the seat belt pretencarpet or gymnasium floor.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do not drive your vehicle after the air bags have de- Enhanced Accident Response System ployed. If you are involved in another collision, the air In the event of an impact, if the communication network bags will not be in place to protect you.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 The ORC contains a backup power supply system that may deploy the air bags even if the battery loses power or In order to reset the Enhanced Accident Response System it becomes disconnected prior to deployment. functions after an event, the ignition must be changed from ignition START or ON/RUN to ignition OFF.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE free, if any of the following occurs, have an authorized dealer service the air bag system immediately. WARNING! • The Air Bag Warning Light does not come on during the four to eight seconds when the ignition is first placed in the ON/RUN position. Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Redundant Air Bag Warning Light If a fault with the Air Bag Warning Light is detected, which could affect the Supplemental Restraint System (“SRS”), the Redundant Air Bag Warning Light will illuminate on the instrument panel. The Redundant Air Bag Warning Light will stay on until the fault is cleared. In addition, a single chime will sound to alert you that the Redundant Air Bag Warning Light has come on and a fault has been detected.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, including your trim cover and cushion, needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are different sizes and types of restraints for NOTE: children from newborn size to the child almost large • For additional information, refer to enough for an adult seat belt. Always check the child seat www.seatcheck.org or call 1–866–SEATCHECK (732– Owner’s Manual to make sure you have the correct seat 8243). Canadian residents should refer to Transport for your child.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Summary Of Recommendations For Restraining Children In Vehicles Infants and Toddlers Small Children Larger Children Children Too Large for Child Restraints Child Size, Height, Weight Or Age Children who are two years old or younger and who have not reached the height or weight limits of their child restraint Children who are at least two years old or who have out-grown the height or weight limit of their rear-facing child restraint Children who have out-g
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints Safety experts recommend that children ride rear-facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear-facing child restraint. Two types of child restraints can be used rear-facing: infant carriers and convertible child seats. The infant carrier is only used rear-facing in the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats 5. Can the child stay seated like this for the whole trip? Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Child + Child Restraint Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child Restraint Forward-Facing Child Restraint Up to 65 lbs (29.5 kg) More than 65 lbs (29.5 kg) Up to 65 lbs (29.5 kg) More than 65 lbs (29.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors And Tethers For Children (LATCH) Restraint System Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 LATCH Positions For Installing Child Restraints In This Vehicle 2 • • Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the LATCH anchorage system to attach the child restraint? 65 lbs (29.5 kg) Can the LATCH anchorages and the seat belt be used together to attach a rear-facing or forwardfacing child restraint? No Use the LATCH anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.5 kg).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Can two child restraints be attached using a common lower LATCH anchorage? No Can the rear-facing child restraint touch the back of the front passenger seat? Yes Can the head restraints be removed? Yes Never “share” a LATCH anchorage with two or more child restraints.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage symbols on the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Locating Tether Anchorages There are tether strap anchorages behind each rear seating position located in the panel between the rear seatback and the rear window. They are found under a plastic cover with the tether anchorage symbol on it. LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Never use the same lower anchorage to attach more than one child restraint. Please refer to “Installing The LATCH-Compatible Child Restraint System” for typical installation instructions. 1. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages. 2. Place the child seat between the lower anchorages for that seating position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 4. If the child restraint has a tether strap, connect it to the top tether anchorage. See the section “Installing Child Restraints Using the Top Tether Anchorage” for directions to attach a tether anchor. 5. Tighten all of the straps as you push the child restraint rearward and downward into the seat. Remove slack in the straps according to the child restraint manufacturer’s instructions. 6.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Installing Child Restraints Using The Vehicle Seat Belt • Improper installation of a child restraint to the LATCH anchorages can lead to failure of the restraint. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. • Child restraint anchorages are designed to withstand only those loads imposed by correctly-fitted child restraints.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle 2 • ALR = Switchable Automatic Locking Retractor • Top Tether Anchorage Symbol
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + weight of the child restraint) for using the Tether Anchor with the seat belt to attach a forward facing child restraint? Can the rear-facing child restraint touch the back of the front passenger seat? Weight limit of the Child Restraint Can the head restraints be removed? Can the buckle stalk be twisted to tighten the seat belt against the belt path of the child restraint? Yes Yes No Always use the tether ancho
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR) 4. Pull on the webbing to make the lap portion tight against the child seat. 1. Place the child seat in the center of the seating 5. To lock the seat belt, pull down on the shoulder part of position. For some second row seats, you may need to the belt until you have pulled all the seat belt webbing recline the seat and/or raise the head restraint to get a out of the retractor.
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. If the child restraint has a top tether strap and the Installing Child Restraints Using The Top Tether seating position has a top tether anchorage, connect Anchorage the tether strap to the anchorage and tighten the tether WARNING! strap.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available. 2. Rotate or lift the cover to access the anchor directly behind the seat where you are placing the child restraint. 3.
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Remove slack in the tether strap according to the child Transporting Pets restraint manufacturer’s instructions. Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly WARNING! injured, or injure a passenger during panic braking or in • An incorrectly anchored tether strap could lead to a collision. increased head motion and possible injury to the child.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 It is recommended for the operator to observe the follow- 100 to 300 miles (161 to 483 km): ing driving behaviors during the new vehicle break-in • Depress the accelerator pedal slowly and not more period: than halfway to avoid rapid acceleration in lower 0 to 100 miles (0 to 161 km): gears (1st to 3rd gears). • Do not allow the engine to operate at idle for an • Avoid aggressive braking. extended period of time.
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE For the first 1500 mi (2414 km): • Do not participate in track events, sport driving schools, or similar activities during the first 1500 mi (2414 km). NOTE: Check engine oil with every refueling and add if necessary. Oil and fuel consumption may be higher through the first oil change interval. SAFETY TIPS Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 Exhaust Gas WARNING! (Continued) WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The Vehicle Seat Belts not lit during starting, see your authorized dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Inspect the seat belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 WARNING! WARNING! (Continued) Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle.
100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside The Vehicle Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid (if Examine tires for excessive tread wear and uneven wear equipped), or brake fluid leaks are suspected, the cause patterns.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ! MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 ▫ Power Mirrors . . . . . . . . . . . . . . . . . . . . . . .117 ▫ Inside Day/Night Mirror — If Equipped . . . .108 ▫ Heated Mirrors — If Equipped . . . . . . . . . . . .118 ▫ Automatic Dimming Mirror — If Equipped . . .108 ▫ Illuminated Vanity Mirrors — If Equipped . . .118 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . .
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ! SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 ! TO OPEN AND CLOSE THE HOOD . . . . . . . . .144 ▫ Power Seats — If Equipped . . . . . . . . . . . . . .128 ! LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 ▫ Power Lumbar — If Equipped . . . . . . . . . . . .130 ▫ Headlight Switch . . . . . . . . . . . . . . . . . . . . .145 ▫ Heated Seats — If Equipped . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 ▫ Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . .150 ▫ Mist Feature . . . . . . . . . . . . . . . . . . . . . . . . .158 ▫ Lane Change Assist . . . . . . . . . . . . . . . . . . .151 ▫ Headlights On With Wipers (Available With Automatic Headlights Only) . . . . . . . . . . . . .158 ▫ High/Low Beam Switch . . . . . . . . . . . . . . . .151 ▫ Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . .
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . .167 ▫ Setting The Following Distance In ACC . . . . . .179 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . .167 ▫ Overtake Aid . . . . . . . . . . . . . . . . . . . . . . . .183 ▫ To Accelerate For Passing . . . . . . . . . . . . . . . .168 ▫ ACC Operation At Stop . . . . . . . . . . . . . . . . .183 ! ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 ▫ Changing FCW And Active Braking Status. . . .199 ▫ Enabling And Disabling ParkSense® . . . . . . . .213 ▫ FCW Limited Warning . . . . . . . . . . . . . . . . . .200 ▫ Service The ParkSense® Rear Park Assist System . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214 ▫ Service FCW Warning . . . . . . . . . . . . . . . . . .200 ! LANESENSE — IF EQUIPPED . . . . . . . . . . . . .201 ▫ LaneSense Operation . . . . . . . . . . . . . . . . . . .
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Programming A Non-Rolling Code . . . . . . . . .225 ▫ Sunshade Operation. . . . . . . . . . . . . . . . . . . .232 ▫ Canadian/Gate Operator Programming . . . . . .226 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . .232 ▫ Using HomeLink® . . . . . . . . . . . . . . . . . . . .228 ▫ Sunroof Maintenance . . . . . . . . . . . . . . . . . . .233 ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . .228 ▫ Ignition Off Operation . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 ▫ Cargo Area — Vehicles Equipped With 60/40 Split-Folding Rear Seat . . . . . . . . . . . . . . . . . .241 ▫ Rear Window Defroster . . . . . . . . . . . . . . . . .243 ! REAR WINDOW FEATURES . . . . . . . . . . . . . .
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the windshield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting. The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you. NOTE: • The Automatic Dimming Mirror feature is disabled when the vehicle is in reverse gear to improve rear view viewing. • The Automatic Dimming Mirror feature can be turned on or off using the Uconnect® System.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The ASSIST and 9–1–1 features operate through • Vehicle Customer Care – Total support for all other the Uconnect® Access service. These buttons will only vehicle issues. operate as long as your Uconnect® Access service is 9-1-1 Call active. Refer to your “Uconnect® System supplement 1. Push the 9-1-1 Call button on the Rearview Mirror. manual” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 3. Once a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit the following important vehicle information to a 9-1-1 operator: NOTE: Once a connection is made between the vehicle’s 9-1-1 Call system and the 9-1-1 operator, the 9-1-1 operator may be able to open a voice connection with the vehicle to determine if additional help is needed.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • If anyone in the vehicle could be in danger (e.g., fire or smoke is visible, dangerous road conditions or location), do not wait for voice contact from a 9-1-1 operator. All occupants should exit the vehicle immediately and move to a safe location. • The 9-1-1 Call system is embedded into the vehicle’s electrical system. Do not add aftermarket electrical equipment to the vehicle’s electrical system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 WARNING! (Continued) • Modifications to any part of the 9-1-1 Call system could cause the air bag system to fail when you need it. You could be injured if the air bag system is not there to help protect you. 9-1-1 Call System Limitations Vehicles sold in Canada and Mexico DO NOT have 9-1-1 Call system capabilities. 9-1-1 or other emergency line operators in Canada and Mexico may not answer or respond to 9-1-1 system calls.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • The Occupant Restraint Control module turns on the Air Bag Warning Light on the instrument panel if a malfunction in any part of the system is detected. If the Air Bag Warning Light is illuminated, the air bag system may not be working properly and the 9-1-1 system may not be able to send a signal to a 9-1-1 operator. If the Air Bag Warning Light is illuminated, have an authorized dealer service the ORC system immediately.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 NOTE: Never place anything on or near the vehicle’s wireless and GPS antennas. You could prevent wireless and GPS signal reception, which can prevent your vehicle from placing an emergency call. Wireless and GPS signal reception is required for the 9-1-1 Call system to function properly.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE in both mirrors when you use the Remote Keyless Entry (RKE) transmitter or open any door. This LED shines Some models have outside mirrors that are hinged. The outward to illuminate the front and rear door handles. It hinge allows the mirror to pivot forward and rearward to also shines downward to illuminate the area in front of resist damage. The hinge has three detent positions: full the doors. forward, full rearward and normal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 NOTE: The Tilt Mirrors in Reverse feature is not turned on when delivered from the factory. The Tilt Mirrors in Reverse feature can be turned on and off using the Uconnect® System. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. 3 Power Mirrors The power mirror controls are located on the driver’s door trim panel.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using the mirror control switch, push on any of the four Illuminated Vanity Mirrors — If Equipped arrows for the direction that you want the mirror to An illuminated vanity mirror is located on the sun visor. move. To use the mirror, rotate the sun visor downward and Power mirror preselected positions can be controlled by swing the mirror cover upward. The light turns on the optional Memory Seat Feature. Refer to “Driver automatically.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 “Slide-On-Rod” And Extender Features Of Sun Visor To use the “Slide-On-Rod” feature of the sun visor, rotate the sun visor downward and swing the sun visor so it is parallel to the side window, grab the sun visor and pull rearwards until the sun visor is in the desired position. To use the extender feature of the sun visor, grab the extender which is located at the rear of the visor and pull rearward.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE BLIND SPOT MONITORING (BSM) — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radarbased sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones from the rear/front/side of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 The BSM detection zone covers approximately one lane width on both sides of the vehicle 12 ft (3.8 m). The zone length starts at the outside rear view mirror and extends approximately 10 ft (3 m) beyond the rear bumper of the vehicle. The BSM system monitors the detection zones on both sides of the vehicle when the vehicle speed reaches approximately 6 mph (10 km/h) or higher and will alert the driver of vehicles in these areas.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Overtaking Traffic If you pass another vehicle slowly (with a relative speed of less than 15 mph (24 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 15 mph (24 km/h), the warning light will not illuminate.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicyclists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicle’s mirrors, glance over your shoulder, and use your turn signal before changing lanes. Failure to do so can result in serious injury or death.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. Modes Of Operation Three selectable modes of operation are available in the Uconnect® System. Refer to “Uconnect® Settings/ Customer Programmable Features” in “Understanding Your Instrument Panel” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded. Whenever a turn signal and detected object are present on the same side at the same time, both the visual and audio alerts will be issued. In addition to the audible alert the radio (if on) volume will be reduced.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. The device must accept any interference received, including interference that may cause undesired operation of the device. Changes or modifications to any of these systems by other than an authorized service facility could void authorization to use this equipment. SEATS WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch. Release the switch when the desired position is reached.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the seat will move in the direction of the switch. Release the switch when the desired position is reached. WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 The front driver and passenger heated seats are operated using the Uconnect® System. WARNING! Power Lumbar Switch Heated Seats — If Equipped On some models, the front and rear seats may be equipped with heaters in both the seat cushions and seatbacks.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE will change from HI to LO, indicating the change. The LO-level setting will turn OFF automatically after apThe front heated seats control buttons are located within proximately 45 minutes. the climate or controls screen of the touchscreen. NOTE: You can choose from HI, LO or OFF heat settings. The indicator lights in each switch indicate the level of heat in • Once a heat setting is selected, heat will be felt within use.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Rear Heated Seats NOTE: On some models, the two outboard seats are equipped • Once a heat setting is selected, heat will be felt within with heated seats. The heated seat switches for these two to five minutes. seats are located on the rear of the center console. There that allow the rear • The engine must be running for the heated seats to are two heated seat switches operate. passengers to operate the seats independently.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The engine must be running for the ventilated Located in the seat cushion and seat back are small fans seats to operate. that draw the air from the passenger compartment and Vehicles Equipped With Remote Start move air through fine perforations in the seat cover to help keep the driver and front passenger cooler in higher On models that are equipped with remote start, the ambient temperatures.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision. Reactive Head Restraints — Front Seats The front driver and passenger seats are equipped with Reactive Head Restraints (RHR).
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjustment Button 1 — Release Button 2 — Adjustment Button • A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed head restraints in a location outside the occupant compartment. • ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Rear Head Restraints The center head restraint has two adjustable positions, up or down. When the center seat is being occupied the head restraint should be in the raised position. When there are no occupants in the center seat the head restraint can be lowered for maximum visibility for the driver. 3 To raise the head restraint, pull upward on the head restraint.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After releasing the seatback, it can be folded forward. Folding Rear Seat The rear seatbacks can be folded forward to provide an additional storage area. To fold the rear seatback, pull on the loops located on the upper seatback. NOTE: These loops can be tucked away when not in use. Folded Rear Seatback When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Adjust all memory profile settings to desired preferences (i.e., seat, side mirror, adjustable pedals [if equipped], power tilt and telescopic steering column [if equipped], and radio station presets). 3. Push and release the SET (S) button on the memory switch. 4. Within five seconds, push and release the MEMORY button 1 or 2. The Drivers Information Display (DID) will display which memory position has been set.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Linking And Unlinking The Remote Keyless Entry Transmitter To Memory NOTE: If a memory profile has not already been set, refer to #Programming The Memory Feature# in this section for instructions on how to set a memory profile. Your RKE transmitters can be programmed to recall one of two pre-programmed memory profiles by pushing the 3. Once the profile has been recalled, push and release UNLOCK button on the RKE transmitter.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If the vehicle is equipped with Passive Entry, the memory settings will be recalled with a Passive Entry NOTE: The vehicle must be in PARK to recall memory Unlock into the driver’s door using the Key Fob linked to positions. If a recall is attempted when the vehicle is not position 2. in PARK, a message will display in the Drivers InformaA recall can be cancelled by pushing any of the MEMORY tion Display (DID).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 • When you cycle the vehicles ignition to the OFF position, the driver seat will move about 2.4 in (60 mm) rearward if the driver seat position is greater than or equal to 2.7 in (67.7 mm) forward of the rear stop. The seat will return to its previously set position when you cycle the vehicles ignition to the ACC or RUN position. • The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9 in (22.7 mm) forward of the rear stop.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. 3. Reach under the center front edge of the hood and push and hold the safety catch lever to the left. 1. Pull the hood release lever located under the left side of the instrument panel. Safety Catch Lever Location 4. Lift the hood upward to the open position. Hood Release Lever 2. Move to the front of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 inches (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch counterclockwise to the AUTO position. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 is set to ON. In addition, the headlights will turn off NOTE: when the wipers are turned off if they were turned on by • The Automatic High Beam Headlamp Control can be this feature. turned on or off using the Uconnect® System. Refer to “Uconnect® Settings” in “Understanding Your InstruNOTE: The Headlights On with Wipers feature can be ment Panel” for further information. turned on or off using the Uconnect® System.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Push the multifunction lever away from you (toward To activate the delay feature, turn OFF the ignition switch while the headlights are still on. Then, turn off the front of vehicle) to engage the high beam mode. headlights within 45 seconds. The delay interval begins NOTE: This system will not activate until the vehicle is when the headlight switch is turned off. at or above 15 mph (24 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Daytime Running Lights (DRL) — If Equipped The Daytime Running Lights will turn On when the engine is started and remain On unless the headlamps are turned ON, the parking brake is applied, or the engine is shut Off.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE An indicator light in the instrument cluster illuminates when the fog lights are turned on. NOTE: The fog lights will operate with the low beam headlights or parking lights on. However, selecting the high beam headlights will turn off the fog lights. Multifunction Lever The multifunction lever controls the operation of the turn signals, headlight beam selection and passing lights. The multifunction lever is located on the left side of the steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 NOTE: High/Low Beam Switch • If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. Push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever toward you to switch the headlights back to low beam.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the lights off, push the switch a second time. The Lights are mounted in the overhead console. Each light lights also turn on when a door is opened. The lights will can be turned on by pushing the switch on either side of also turn on when the UNLOCK button on the RKE is pushed. the console. These buttons are backlit for night time visibility.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Courtesy Lights Ambient Light — If Equipped The courtesy lights can be turned on by pushing the top The overhead console is equipped with an ambient light corner of the lens. To turn the lights off, push the lens a feature. This light casts illumination for improved visibilsecond time. ity of the floor and center console area.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Lights The interior lights come on when a door is opened. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open. This includes the glove box light and the trunk light.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Interior Light Defeat (OFF) Rotate the left dimmer control to the extreme bottom “OFF” position. The interior lights will remain off when the doors are open. Parade Mode (Daytime Brightness Feature) Rotate the instrument panel dimmer control upward to the first detent. This feature brightens all text displays such as the odometer, Driver Information Display (DID), and radio when the position lights or headlights are on.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE are four delay settings, which allow you to regulate the wipe interval from a minimum of one cycle every second to a maximum of approximately 36 seconds between cycles. The delay intervals will double in duration when the vehicle speed is 10 mph (16 km/h) or less.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 CAUTION! (Continued) • In cold weather, always turn off the wiper switch and allow the wipers to return to the “Park” position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted. • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE mist or spray from a passing vehicle. The wipers will continue to operate until you release the multifunction This feature utilizes a heating element to thaw out any ice lever. buildup that could occur at the outlets or within the windshield washer nozzles. To activate, push the rear NOTE: The mist feature does not activate the washer window defroster button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 NOTE: The Headlights On with Wipers feature can be turned on or off using the Uconnect® System. Refer to “Uconnect® Settings/Customer Programmable Features” in “Understanding Your Instrument Panel” for further information. Rain Sensing Wipers — If Equipped Settings 1 and 2 can be used if the driver desires less wiper sensitivity. Setting 4 can be used if the driver desires more sensitivity. Place the wiper switch in the OFF position when not using the system.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Rain Sensing system has protection features for the POWER TILT/TELESCOPING STEERING COLUMN wiper blades and arms, and will not operate under the — IF EQUIPPED following conditions: This feature allows you to tilt the steering column • Low Ambient Temperature — When the ignition is upward or downward. It also allows you to lengthen or first turned ON, the Rain Sensing system will not shorten the steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmitter or the memory switch on the driver’s door trim panel to return the tilt/telescopic steering column to preprogrammed positions. Refer to “Driver Memory Seat” in this section. WARNING! Power Tilt/Telescoping Switch To tilt the steering column, move the lever up or down as desired.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HEATED STEERING WHEEL — IF EQUIPPED Vehicles Equipped With Remote Start The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on it will operate for up to 80 minutes before automatically shutting off. The heated steering wheel can shut off early or may not turn on when the steering wheel is already warm.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 WARNING! (Continued) • Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. 3 ADJUSTABLE PEDALS — IF EQUIPPED The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Control System is on. The following messages will be displayed on vehicles equipped with the Driver Information Display (DID) if the pedals are attempted to be adjusted when the system is locked out (“Adjustable Pedal Disabled — Cruise Control Engaged” or “Adjustable Pedal Disabled — Vehicle In Reverse”).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). 3 The Electronic Speed Control buttons are located on the right side of the steering wheel.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In order to ensure proper operation, the Electronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed. WARNING! Leaving the Electronic Speed Control system on when not in use is dangerous.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 The drivers preferred units can be selected through the instrument panel settings if equipped. Refer to “UnderA soft tap on the brake pedal, pushing the CANCEL standing Your Instrument Panel” for more information. button, or normal brake pressure while slowing the The speed increment shown is dependant on the chosen vehicle will deactivate the Electronic Speed Control withspeed unit of U.S. (mph) or Metric (km/h): out erasing the set speed from memory.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will • If the button is continually pushed, the set speed will continue to increase until the button is released, then continue to decrease until the button is released, then the new set speed will be established. the new set speed will be established.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: The Electronic Speed Control system maintains ADAPTIVE CRUISE CONTROL (ACC) — IF speed up and down hills. A slight speed change on EQUIPPED moderate hills is normal. Adaptive Cruise Control (ACC) increases the driving On steep hills, a greater speed loss or gain may occur so convenience provided by cruise control while traveling it may be preferable to drive without Electronic Speed on highways and major roadways.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the ACC sensor detects a vehicle ahead, ACC will You can change the mode by using the Cruise Control apply limited braking or acceleration (not to exceed buttons. The two control modes function differently. the original set speed) automatically to maintain a Always confirm which mode is selected. preset following distance, while matching the speed of the vehicle ahead.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 WARNING! (Continued) WARNING! (Continued) • The ACC system: • Does not react to pedestrians, oncoming vehicles, and stationary objects (e.g., a stopped vehicle in a traffic jam or a disabled vehicle). • Cannot take street, traffic, and weather conditions into account, and may be limited upon adverse sight distance conditions. • Does not always fully recognize complex driving conditions, which can result in wrong or missing distance warnings.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • When towing a trailer up or down steep slopes. • When circumstances do not allow safe driving at a constant speed. Adaptive Cruise Control (ACC) Operation The speed control buttons (located on the right side of the steering wheel) operates the ACC system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 NOTE: Any chassis/suspension or tire size modifications • When the parking brake is set. to the vehicle will effect the performance of the Adaptive • When the automatic transmission is in PARK, RECruise Control and Forward Collision Warning System. VERSE or NEUTRAL. Activating Adaptive Cruise Control (ACC) • When the Vehicle speed is outside of the speed range. You can only engage ACC if the vehicle speed is above • When the brakes are overheated.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the system OFF, push and release the Adaptive Push and release the Adaptive Cruise Control (ACC) Cruise Control (ACC) ON/OFF button again. At this ON/OFF button. The ACC menu in the DID displays time, the system will turn off and the DID will display “Adaptive Cruise Control (ACC) Off.” “ACC Ready.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! NOTE: ACC cannot be set if there is a stationary vehicle in front of your vehicle in close proximity. Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have a collision. Always leave the system off when you are not using it. Remove your foot from the accelerator pedal.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The shift lever/gear selector is removed from the To Turn Off Drive position. The system will turn off and erase the set speed in • The Electronic Stability Control/Traction Control Sys- memory if: tem (ESC/TCS) activates. • The Normal (Fixed Speed) Electronic Speed Control ON/OFF button is pushed. • The vehicle parking brake is applied. • Driver seatbelt is unbuckled at low speeds. • The ignition is turned off. • The driver switches ESC to full-off mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 NOTE: To Vary The Speed Setting • If your vehicle stays at standstill for longer than two To Increase Speed seconds, then the system will cancel and the brake While ACC is set, you can increase the set speed by force will be ramped-out. The driver will have to apply pushing the SET + button. the brakes to keep the vehicle at a standstill.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Metric Speed (km/h) U.S. Speed (mph) • Pushing the SET + button once will result in a 1 km/h • Pushing the SET - button once will result in a 1 mph increase in set speed. Each subsequent tap of the decrease in set speed. Each subsequent tap of the button results in an increase of 1 km/h. button results in a decrease of 1 mph.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 NOTE: • When you override and push the SET + button or SET - buttons, the new Set Speed will be the current speed of the vehicle. • When you use the SET - button to decelerate, if the engine’s braking power does not slow the vehicle sufficiently to reach the set speed, the brake system will automatically slow the vehicle. • The ACC system applies the brake down to a full stop when following a target vehicle.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Distance Setting 4 Bars (Longest) Distance Setting 3 Bars (Long)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 3 Distance Setting 2 Bars (Medium) Distance Setting 1 Bar (Short)
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To increase the distance setting, push the Distance Setting • The vehicle ahead moves out of your lane or view of — Increase button and release. Each time the button is the sensor. pushed, the distance setting increases by one bar (longer). • The distance setting is changed. To decrease the distance setting, push the Distance Setting — Decrease button and release. Each time the button • The system disengages. (Refer to the information on ACC Activation).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Overtake Aid When driving with ACC engaged and following a Target vehicle, the system will provide an additional acceleration to assist in passing vehicles in front. This additional acceleration is triggered when the driver utilizes the left or right turn signal. The Overtake Aid will only provide additional acceleration if the vehicle moves with the corresponding turn signal and until the current set speed is reached.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the target vehicle does not start moving within two seconds of your vehicle coming to a standstill, the ACC with Stop system will cancel and the brakes will release. A cancel message will display on the DID and produce a warning chime. Driver intervention will be required at this moment.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Push the SET + or the SET- button (located on the steering Display Warnings And Maintenance wheel) and the following will display in the DID: “Wipe Front Radar Sensor In Front Of Vehicle” ACC SET Warning When ACC is set, the set speed will display in the The “ACC/FCW Unavailable Wipe Front Radar Sensor” warning will display and also a chime will indicate when instrument cluster. conditions temporarily limit system performance.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE vehicle has left these areas. Under rare conditions, when • Do not remove any screws from the sensor. Doing so the radar is not tracking any vehicles or objects in its path could cause an ACC system malfunction or failure and this warning may temporarily occur. require a sensor realignment.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 obstructions, such as mud, dirt, or ice on windshield and fog on the inside of glass. In these cases, the DID will • If the “ACC/FCW Unavailable Wipe Front Radar display “ACC/FCW Limited Functionality Clean Front Sensor” message occurs frequently (e.g. more than Windshield” and the system will have degraded perforonce on every trip) without any snow, rain, mud, or mance.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the condition that created limited functionality is Precautions While Driving With ACC no longer present, the system will return to full function- In certain driving situations, ACC may have detection ality. issues. In these cases, ACC may brake late or unexpectNOTE: If the “ACC/FCW Limited Functionality Clean edly. The driver needs to stay alert and may need to Front Windshield” message occurs frequently (e.g. more intervene.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 the vehicle is out of the curve the system will resume your original Set Speed. This is a part of normal ACC system functionality. NOTE: On tight turns ACC performance may be limited. Offset Driving Condition Example Turns And Bends When driving on a curve with ACC engaged, the system may decrease the vehicle speed and acceleration for stability reasons, with no target vehicle detected.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using ACC On Hills Lane Changing When driving on hills, ACC may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, ACC performance may be limited. ACC may not detect a vehicle until it is completely in the lane in which you are traveling.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Narrow Vehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There may not be sufficient distance to the vehicle ahead.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Stationary Objects And Vehicles General Information ACC does not react to stationary objects and stationary vehicles. For example, ACC will not react in situations where the vehicle you are following exits your lane and the vehicle ahead is stopped in your lane. Always be attentive and ready to apply the brakes if necessary.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Normal (Fixed Speed) Electronic Speed Control Mode In addition to Adaptive Cruise Control mode, a Normal (Fixed Speed) Electronic Speed Control mode is available for cruising at fixed speeds. The Normal (Fixed Speed) Electronic Speed Control mode is designed to maintain a set cruising speed without requiring the driver to operate the accelerator. Electronic Speed Control can only be operated if the vehicle speed is above 20 mph (32 km/h).
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Once a speed has been set a message (CRUISE CON- • If the button is continually pushed, the set speed will continue to increase in 5 mph increments until the TROL SET TO MPH/KM) will appear indicating what button is released. The increase in set speed is reflected speed was set. This light will turn on when the electronic in the DID display. speed control is SET.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 The drivers preferred units can be selected through the • If the button is continually pushed, the set speed will instrument panel settings if equipped. Refer to “Undercontinue to decrease in 10 km/h decrements until the standing Your Instrument Panel” for more information. button is released. The decrease in set speed is reThe speed decrement shown is dependant on the speed flected in the DID display. of U.S. (mph) or Metric (km/h) units: To Cancel U.S.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The shift lever/gear selector is removed from the FORWARD COLLISION WARNING (FCW) WITH Drive position. MITIGATION — IF EQUIPPED To Resume Speed Forward Collision Warning (FCW) With Mitigation To resume a previously set speed, push the RES button Operation and release. Resume can be used at any speed above The Forward Collision Warning (FCW) system with 20 mph (32 km/h).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 NOTE: FCW monitors the information from the forward event stops the vehicle completely, the system will hold looking sensors as well as the Electronic Brake Controller the vehicle at standstill for two seconds and then release (EBC), to calculate the probability of a forward collision. the brakes. When the system determines that a forward collision is probable, the driver will be provided with audible and visual warnings and may provide a brake jerk warning.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the system determines a collision with the vehicle in front of you is no longer probable, the warning message will be deactivated. NOTE: • The minimum speed for FCW activation is 1 mph (2 km/h). • The FCW alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the course prediction. This is expected and is a part of normal FCW activation and functionality.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 To turn the FCW system OFF, push the forward collision Changing FCW And Active Braking Status button once to turn the system OFF (led turns on). The FCW Sensitivity And Active Braking Settings are To turn the FCW system back ON, push the forward programmable through the Uconnect® System. Refer to collision button again to turn the system ON (led turns “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. off).
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE fully available. Once the condition that limited the system performance is no longer present, the system will • The system will retain the last setting selected by the return to its full performance state. If the problem perdriver after ignition shut down. sists, see your authorized dealer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 LANESENSE — IF EQUIPPED LaneSense Operation The driver may manually override the haptic warning by applying torque into the steering wheel at any time. When only a single lane marking is detected and the driver unintentionally drifts across the lane marking (no turn signal applied), the LaneSense system provides a visual warning through the DID to prompt the driver to remain within the lane.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning LaneSense ON Or OFF The default status of LaneSense is “OFF”. To turn the LaneSense system ON, push the LaneSense button to turn the system ON (LED turns off). A “Lane Sense On” message is shown in the DID. The LaneSense button is located on the center stack To turn the LaneSense system OFF, push the LaneSense below the Uconnect® display. button once to turn the system OFF (LED turns on).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 • When the LaneSense system senses the lane has been approached and is in a lane departure situation, the left thick lane line flashes yellow (on/off), the left thin line remains solid yellow and the LaneSense indicator changes from solid white to flashing yellow.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The LaneSense system operates with the similar behavior for a right lane departure when only the right lane marking has been detected. Left Lane Departure — Both Lanes Detected • When the LaneSense system is ON, the lane lines turn from gray to white to indicate that both of the lane markings have been detected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 • For example: If approaching the left side of the lane the steering wheel will turn to the right. changes from solid yellow to flashing yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary. • For example: If approaching the left side of the lane the steering wheel will turn to the right.
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The LaneSense system operates with the similar NOTE: behavior for a right lane departure. • When enabled the system operates above 37 mph (60 km/h) and below 112 mph (180 km/h). Changing LaneSense Status The LaneSense system settings can be configured • Use of the turn signal suppresses the warnings. through the Uconnect® system screen.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 ParkSense® will retain the last system state (enabled or ParkSense® Warning Display disabled) from the last ignition cycle when the ignition is The ParkSense® Warning screen will only be displayed if changed to the ON/RUN position. Sound and Display is selected from the Uconnect® ParkSense® can be active only when the shift lever is in System. Refer to #Uconnect® Settings” in “UnderstandREVERSE.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If an obstacle is detected in the center rear region, the display will show a single solid arc in the center rear region and will produce a one-half second tone. As the vehicle moves closer to the obstacle, the display will show the single arc moving closer to the vehicle and the sound tone will change from slow, to fast, to continuous.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 3 Slow Tone/Solid Arc Fast Tone/Flashing Arc
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Continuous Tone/Flashing Arc
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Arc — Center Rear Arc — Right Rear Radio Volume Reduced None 6th Solid 5th Solid 4th Solid None None None None 3rd Flashing None No Yes Yes Yes Yes 2nd Flashing 2nd Flashing Yes 1st Flashing 1st Flashing Yes
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 When the ParkSense® system is disabled, the Drivers Information Display (DID) will display ParkSense® can be enabled and disabled with the the “PARKSENSE OFF” message for approxiParkSense® switch, located on the switch panel below mately five seconds. Refer to “Drivers Informathe Uconnect® display. tion Display (DID)” in “Understanding Your Instrument Panel” for further information.
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Service The ParkSense® Rear Park Assist System During vehicle start up, when the ParkSense® Rear Park Assist System has detected a faulted condition, the instrument cluster will actuate a single chime, once per ignition cycle and it will display the “PARKSENSE UNAVAILABLE WIPE REAR SENSORS” or “PARKSENSE UNAVAILABLE SERVICE REQUIRED” message for five seconds.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 ParkSense® System Usage Precautions NOTE: • ParkSense® will reduce the volume of the radio when it is sounding an audio tone. • Clean the ParkSense® sensors regularly, taking care not to scratch or damage them. The sensors must not be covered with ice, snow, slush, mud, dirt or debris. Failure to do so can result in the system not working • Jackhammers, large trucks, and other vibrations could properly.
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! (Continued) • ParkSense® is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity. • The vehicle must be driven slowly when using ParkSense® in order to be able to stop in time when an obstacle is detected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 NOTE: The ParkView® Rear Back Up Camera has programmable modes of operation that may be selected through the Uconnect® System. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. When the Vehicle is shifted out of Reverse (with camera delay turned OFF) the rear camera mode is exited and the last touchscreen appears again.
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! Drivers must be careful when backing up even when using the ParkView® Rear Back Up Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 OVERHEAD CONSOLE Front Map/Reading Lights — If Equipped The overhead console contains courtesy/reading lights and storage for sunglasses. Universal Garage Door Opener (HomeLink®) and power sunroof switches may also be included, if equipped. Lights are mounted in the overhead console. Each light can be turned on by pushing the switch on either side of the console. These buttons are backlit for night time visibility.
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the lights off, push the switch a second time. The lights also turn on when a door is opened. The lights will also turn on when the UNLOCK button on the RKE is pushed. Front Map/Reading Light Switches Courtesy Lights The courtesy lights can be turned on by pushing the top corner of the lens. To turn the lights off, push the lens a second time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 Sunglasses Bin Door GARAGE DOOR OPENER — IF EQUIPPED At the front of the console a compartment is provided for the storage of a pair of sunglasses. The storage compartment access is a “push/push” design. Push the chrome pad on the door to open. Push the chrome pad on the door to close. HomeLink® replaces up to three hand-held transmitters that operate devices such as garage door openers, motorized gates, lighting or home security systems.
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink® system. To erase the channels place the ignition in the ON/RUN position and push and hold the two outside HomeLink® buttons (I and III) for up 20 seconds or until the red indicator flashes.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 Programming A Rolling Code For programming garage door openers that were manufactured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is attached to the garage door opener. It is NOT the button that is normally used to open and close the door. The name and color of the button may vary by manufacturer. 3 Training The Garage Door Opener 1 — Door Opener 2 — Training Button 1.
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. Firmly push and release the “LEARN” or “TRAINING” button. On some garage door openers/devices there may be a light that blinks when the garage door opener/device is in the LEARN/TRAIN mode. 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator To reprogram a channel that has been previously trained, light in view. follow these steps: 3. Push and hold the Homelink® button you want to 1. Cycle the ignition to the ON/RUN position. program while you push and hold the hand-held 2. Push and hold the desired HomeLink® button until transmitter button.
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To program the two remaining HomeLink® buttons, Canadian/Gate Operator Programming repeat each step for each remaining button. DO NOT For programming transmitters in Canada/United States erase the channels. that require the transmitter signals to “time-out” after several seconds of transmission.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view. • If the indicator light stays on constantly, programming is complete and the garage door/device should activate when the HomeLink® button is pushed. • To program the two remaining HomeLink® buttons, repeat each step for each remaining button. DO NOT erase the channels. 3.
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Without releasing the button proceed with The HomeLink® Universal Transceiver is disabled when “Canadian/Gate Operator Programming” step 2 and the Vehicle Security Alarm is active. follow all remaining steps. Troubleshooting Tips Using HomeLink® If you are having trouble programming HomeLink®, To operate, push and release the programmed here are some of the most common solutions: HomeLink® button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 WARNING! • Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run your vehicle in the garage while programming the transceiver. Exhaust gas can cause serious injury or death. • Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate.
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. Power Sunroof Switch WARNING! • Never leave children unattended in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children. Do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 WARNING! (Continued) • Do not allow small children to operate the sunroof. Never allow your fingers, other body parts, or any object, to project through the sunroof opening. Injury may result. movement. The sunroof and sunshade will remain in a partially opened condition until the switch is pushed and held rearward again.
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Feature Sunshade Operation This feature will detect an obstruction in the opening of the sunroof during Express Close operation. If an obstruction in the path of the sunroof is detected, the sunroof will automatically retract. Remove the obstruction if this occurs. Next, push the switch forward and release to Express Close. The sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 Sunroof Maintenance ELECTRICAL POWER OUTLETS Use only a non-abrasive cleaner and a soft cloth to clean Your vehicle is equipped with one 12 Volt (13 Amp) the glass panel. power outlet on the instrument panel and one 12 Volt (10 Amp) power outlet in the center console that can be used Ignition Off Operation to power cellular phones, small electronics and other low NOTE: powered electrical accessories.
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To ensure proper cigar lighter operation, a MOPAR® knob and element must be used. WARNING! The front power outlet is located inside the storage area on the center stack of the instrument panel. Do not place ashes inside the cubby bin located on the center console on vehicles not equipped with the ash receiver tray. A fire leading to bodily injury could result.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 3 Center Console Power Outlet NOTE: If the Media Hub is in use, do not exceed the maximum power of 100 Watts (8 Amps) for the center console power outlet. When the Media Hub is not in use, the outlet can deliver up to 120 Watts (10 Amps). If the power rating is exceeded, the fuse protecting the system will need to be replaced.
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The instrument panel power outlet and dual rear console USB ports can be changed to “battery” powered all the time by moving the #12 20 Amp fuse from “IGN” to “B+”. Refer to “Rear Power Distribution Center Cover” in “Rear Power Distribution Center (Fuses)”. WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 CAUTION! (Continued) • Power outlets are designed for accessory plugs only. Do not hang any type of accessory or accessory bracket from the plug. Improper use of the power outlet can cause damage. CUPHOLDERS Front Seat Cupholders The cupholders are located in the forward edge of the center console.
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Seat Cupholders The rear seat cupholders are located in the center armrest between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the rear occupant’s elbows.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 Lighted Cupholders — If Equipped STORAGE On some vehicles the rear cupholders are equipped with Glove Compartment a light ring that illuminates the cupholders for the rear The glove compartment is located on the passenger side passengers. The light ring is controlled by the Dimmer of the instrument panel. Control. Refer to “Lights” in “Understanding The Features Of Your Vehicle” for further information.
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Inside the center console armrest, there is a removable There is an open cubby bin located forward of the shift upper storage tray that can be slid forward/rearward on rails for access to the lower storage area. This tray has an lever. integrated coin holder, along with additional area for Two separate storage compartments are also located small items like an ipod or phone. Below the upper tray, underneath the center console armrest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 Door Storage The door panels contain storage areas. Cargo Area — Vehicles Equipped With 60/40 Split-Folding Rear Seat The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they provide a continuous, nearly-flat extension of the load floor.
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury. • The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located on the climate control. Push this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 10 minutes. For an additional five minutes of operation, push the button a second time.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ! INSTRUMENT PANEL FEATURES . . . . . . . . . .248 ! Uconnect® SETTINGS . . . . . . . . . . . . . . . . . . .280 ! INSTRUMENT CLUSTER — SRT . . . . . . . . . . .249 ▫ Buttons On The Faceplate. . . . . . . . . . . . . . . .281 ! INSTRUMENT CLUSTER — SRT . . . . . . . . . . .250 ▫ Buttons On The Touchscreen. . . . . . . . . . . . . .281 ! INSTRUMENT CLUSTER DESCRIPTIONS . . . . .251 ▫ Customer Programmable Features — Uconnect® 8.4 Settings . . . . . . . . . .
246 UNDERSTANDING YOUR INSTRUMENT PANEL ! Uconnect® RADIOS — IF EQUIPPED . . . . . . . .332 ! Uconnect® VOICE RECOGNITION QUICK TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .350 ! iPod®/USB/MP3 CONTROL . . . . . . . . . . . . . .333 ▫ Introducing Uconnect® . . . . . . . . . . . . . . . . .350 ! STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . . .334 ▫ Get Started . . . . . . . . . . . . . . . . . . . . . . . . . .351 ▫ Radio Operation . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 247 ▫ Mobile App (8.4A/8.4AN) . . . . . . . . . . . . . . .360 ▫ SiriusXM Travel Link™ (8.4A/8.4AN) . . . . . . .362 ▫ Voice Texting (8.4A/8.4AN) . . . . . . . . . . . . . .361 ▫ Additional Information . . . . . . . . . . . . . . . . .363 ▫ Yelp® (8.4A/8.4AN). . . . . . . . . . . . . . . . . . . .
248 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 2 3 4 5 6 — Air Outlet — Instrument Cluster — Paddle Shifters — Uconnect® System — SRT Controls — Glove Compartment 7 — Climate Controls 8 — Power Outlet 9 — Engine Start/Stop Button 10 — Trunk Release Button 11 — Dimmer Controls 12 — Headlight Switch
UNDERSTANDING YOUR INSTRUMENT PANEL 249 INSTRUMENT CLUSTER — SRT 4 Instrument Cluster For SRT 6.
250 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — SRT Instrument Cluster For SRT 6.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 INSTRUMENT CLUSTER DESCRIPTIONS 3. Brake Warning Light 1. Tachometer This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir.
252 UNDERSTANDING YOUR INSTRUMENT PANEL The light will remain on until the cause is corrected. Vehicles equipped with the Anti-Lock Brake System (ABS) are also equipped with Electronic Brake Force NOTE: The light may flash momentarily during sharp Distribution (EBD). In the event of an EBD failure, the cornering maneuvers which change fluid level condiBrake Warning Light will turn on along with the ABS tions. The vehicle should have service performed, and Light.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 4. Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition is first cycled to the ON/RUN position. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information. 5. Driver Information Display (DID) Area NOTE: U.S.
254 UNDERSTANDING YOUR INSTRUMENT PANEL As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System This indicator will illuminate when the park (TPMS) that illuminates a low tire pressure telltale when lights or headlights are turned on. one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as 7.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
256 UNDERSTANDING YOUR INSTRUMENT PANEL 9. Electronic Stability Control (ESC) OFF Indicator malfunction has been detected in the ESC system. If this Light — If Equipped light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at This light indicates the Electronic Stability Conspeeds greater than 30 mph (48 km/h), see your authotrol (ESC) is off.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 functioning and service is required. However, the conventional brake system will continue to operate normally The arrow will flash with the exterior turn if the BRAKE warning light is not on. signal when the turn signal lever is operated. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock NOTE: Brakes.
258 UNDERSTANDING YOUR INSTRUMENT PANEL The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range.
UNDERSTANDING YOUR INSTRUMENT PANEL 259 Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the MIL after This light will flash at a fast rate for approxiengine start. The vehicle should be serviced if the MIL mately 15 seconds when the vehicle security stays on through several of your typical driving cycles. In alarm is arming, and then will flash slowly most situations, the vehicle will drive normally and will until the vehicle is disarmed. not require towing.
260 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to the driver, occupants or others.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 This system conveniently allows the driver to select a • Diagnostics — If Equipped variety of useful information by pushing the arrow • Performance Shift Indicator (PSI) — If Equipped buttons located on the left side of the steering wheel.
262 UNDERSTANDING YOUR INSTRUMENT PANEL Up And Down Arrow Buttons: • Main menu and submenu’s wrap for continuous scrolling. Using the Up or Down arrows allows you to cycle through the Main Menu Items. • Upon returning to a main menu, the last submenu screen viewed within that main menu will be disChanges the Main Screen area and Menu Title played. area. OK Button: For Digital Speedometer Left And Right Arrow Buttons: • Pushing the OK button changes units (MPH or km/h).
UNDERSTANDING YOUR INSTRUMENT PANEL 263 • Pushing the left arrow button will exit each submenu Unless reset, this message will continue to display each time you place the ignition in the ON/RUN position. To layer and return to the main menu. turn off the message temporarily, push and release the For the Trip and Fuel Economy menus (and new PerforOK button.
264 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the indicator message illuminates when you 2. Push and release the DOWN arrow button to scroll start the vehicle, the oil change indicator system did not downward through the main menu to “ Vehicle Info.” reset. If necessary, repeat this procedure. 3. Push and release the RIGHT arrow button to access Secondary Method Of Navigating To The Oil Life the ”Oil Life” screen. Screen In The DID And Holding Ok 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 Cruise Control This area will show reconfigurable white caution telltales. These telltales include: • Service Forward Collision Warming — If Equipped This light warns the driver of a potential collision with the vehicle in front and prompts the driver to take action in order to avoid the • Cruise Ready collision.
266 UNDERSTANDING YOUR INSTRUMENT PANEL to be taken to the dealer for service. It is likely the vehicle has lost power steering assistance. Refer to “Power This telltale will turn on to indicate that the Steering” in “Starting And Operating” for further LaneSense Departure has detected a failure. information. • LaneSense Failure Telltale • Service AWD Indicator This telltale will turn on to indicate the All Wheel Drive (AWD) system is not functioning properly and that service is required.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 • Decklid Ajar This light will turn on to indicate the decklid may be ajar. • Charging System Light This light shows the status of the electrical charging system. If the light stays on or comes on while driving, turn off some of the vehicle’s non-essential electrical devices or increase engine speed (if at idle). If • Oil Pressure Warning Light the charging system light remains on, it means that the This light indicates low engine oil pressure.
268 UNDERSTANDING YOUR INSTRUMENT PANEL • Electronic Throttle Control (ETC) Light • Oil Temperature Warning Light This light informs you of a problem with the This telltale indicates engine oil temperature is Electronic Throttle Control (ETC) system. The high. If the light turns on while driving, stop light will come on when the ignition is first the vehicle and shut off the engine as soon as turned ON and remain on briefly as a bulb possible. check.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 • Speed Limit Warning Light Push and release the UP or DOWN arrow button until the Speed Limit Warning Menu icon/title is highlighted in the DID. Push and release OK to enter speed warning. Use UP or DOWN arrow to select a desired speed, then push and release OK to set the speed. The Manual Speed Assist (MSA) Speed Warning telltale will display in the DID, and a chime will sound with a pop up warning message when the set speed is exceeded.
270 UNDERSTANDING YOUR INSTRUMENT PANEL DID Selectable Menu Items Tire Pressure Monitor Push and release the UP or DOWN arrow buttons until Coolant Temp the desired Selectable Menu item is displayed in the DID. Trans Temp Follow the Menu or submenu prompts as desired. Oil Temp Speedometer Oil Pressure Push and release the UP or DOWN arrow button until the Speedometer menu is displayed in the DID.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 Performance Features WARNING! Measurement of vehicle statistics with the Performance Features is intended for off-highway or offroad use only and should not be done on any public roadways. It is recommended that these features be used in a controlled environment and within the limits of the law.
272 UNDERSTANDING YOUR INSTRUMENT PANEL • 1/4 Mile (400 meters) Timer – Best – Last – Current – Reaction Timer The following describes each feature and its operation: • Braking Distance – Distance – From Speed • The feature will “ready” when the vehicle speed is at 0 mph (0 km/h). The word “READY” will flash when conditions are met for the event to begin. • Current G-Forces • Dashes will display if the vehicle fails to reach 60 mph (100 km/h) in less then 10 seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 • The feature will “ready” when the vehicle is at 0 mph (0 km/h). The word “READY” will flash when condiWhen selected, this screen displays the time it takes for tions are met for the event to begin. the vehicle to go from 0 to 100 mph (0 to 161 km/h) within 20 seconds. • Dashes will display if the vehicle fails to reach 1/8 mile (200 meters) in less then 15 seconds. • The feature will “ready” when the vehicle speed is at 0 to 100 mph (0 to 161 km/h) 0 mph (0 km/h).
274 UNDERSTANDING YOUR INSTRUMENT PANEL • To clear the vehicle’s best 1/4 mile 400 meters) run, push and hold the OK button for two seconds. • Pushing and holding the OK button will clear the current and last run values. Braking Distance Current G-Force When selected, this screen displays the vehicle’s braking When selected, this screen displays the current G-Force distance, and the speed at which the brake pedal was (lateral and longitudinal) that displays the directions of depressed. the forces.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 Lap Timer 1st (top) space on the Timer History page the current time resets to 0:00.0 at every push of the OK button. When selected, the Lap Timer page will show the timer always at 0:00.00 with the previous Best and Last time • The timer will stop when the driver navigates away data (unless the driver has cleared it via hold to Reset). from this page. • Pushing OK will start “current” timer from 0:00.0.
276 UNDERSTANDING YOUR INSTRUMENT PANEL Push the ADAPTIVE CRUISE CONTROL (ACC) ON/ OFF button (located on the steering wheel) until one of When selected, this screen displays the Top Speed since the following displays in the DID: last reset: Adaptive Cruise Control Off • Populates a top speed from first drive cycle and every time that speed is exceeded that number is stored here When ACC is deactivated, the display will read “Adapunless/until the driver resets the screen. tive Cruise Control Off.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 The ACC screen may display once again if any ACC LaneSense — If Equipped activity occurs, which may include any of the following: The DID displays the current LaneSense system settings. • Distance Setting Change The information displayed depends on LaneSense system status and the conditions that need to be met. For • System Cancel further information, refer to “LaneSense — If Equipped” • Driver Override in “Understanding The Features Of Your Vehicle.
278 UNDERSTANDING YOUR INSTRUMENT PANEL • Lower end of gauge will be displayed in an amber Audio color and turn green as Fuel Economy improves. Push and release the UP or DOWN arrow button until • MPG will have the gauge fill from the left (clockwise). the Audio Menu displays in the DID. • L/100 km will have the gauge fill from the right Stored Messages (counter clockwise). Push and release the UP or DOWN arrow button until • Hold OK to reset average fuel economy information.
UNDERSTANDING YOUR INSTRUMENT PANEL 279 • If the menu is exited before the end of codes is reached - when the driver re-enters the list will be restarted Push and release the UP or DOWN arrow button until from the beginning. the diagnostic Menu is selected. Then, the Driver is able to view engine and emission vehicle faults. • When no codes are present or the last code is reached = (P0000) and this message is displayed: • Push OK to have the most recent fault code sent.
280 UNDERSTANDING YOUR INSTRUMENT PANEL The PSI indicator in the DID display remains illuminated until the driver changes gear, or the driving conditions return to a situation where changing gear is not required, corresponding to the configured RPMs in the head unit. Uconnect® SETTINGS The Uconnect® system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel that allows you to access and change the customer programmable features.
UNDERSTANDING YOUR INSTRUMENT PANEL 281 Buttons On The Faceplate Buttons On The Touchscreen Buttons on the faceplate are located below the Uconnect® system in the center of the instrument panel. In addition, there is a Scroll/Enter control knob located on the right side. Turn the control knob to scroll through menus and change settings (i.e., 30, 60, 90), push the center of the control knob one or more times to select or change a setting (i.e., ON, OFF).
282 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Display • Only one touchscreen area may be selected at a time. After pressing the “Display” button on the touchscreen the following settings will be available: • Depending on the vehicles options, feature settings • Display Mode may vary. When making a selection, press the button on the touch- When in this display you may select one of the auto screen to enter the desired mode. Once in the desired display settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 283 point on the scale between the “+” and “–” buttons on the touchscreen. Then press the back arrow button on the When in this display, you may select the brightness with touchscreen. the headlights on.
284 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Language When in this display, you may select one of multiple languages (English / Français / Español) for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the Set Language button on the touchscreen, then press the desired language button on the touchscreen until a check-mark appears next to the language, showing that setting has been selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 285 Units • Pressure After pressing the “Units” button on the touchscreen you Select from: “psi,” “kPa,” or “bar.” may select each unit of measure independently displayed • Temperature in the Driver Information Display (DID), and navigation system (if equipped). The following selectable units of Select from: “°C,” or “°F.” measure are listed below: • Power • Speed Select from: “HP” (US), “HP” (UK), and “kW.” Select from: “MPH” or “km/h.
286 UNDERSTANDING YOUR INSTRUMENT PANEL next to the setting, showing that setting has been seAfter pressing the “Voice” button on the touchscreen the lected. Press the back arrow button on the touchscreen to return to the previous menu. following settings will be available: Voice • Voice Response Length When in this display, you may change the Voice Response Length settings.
UNDERSTANDING YOUR INSTRUMENT PANEL 287 buttons on the touchscreen to adjust the hours up or • Show Time In Status Bar — If Equipped down. Press the back arrow button on the touchscreen to This feature will allow you to turn on or shut off the return to the previous menu. digital clock in the status bar. To change the Show Time • Set Time Minutes Status setting press the “Show Time in Status Bar” button This feature will allow you to adjust the minutes.
288 UNDERSTANDING YOUR INSTRUMENT PANEL Near. The default status of FCW is the Far setting. This means the system will warn you of a possible collision with the vehicle in front of you when you are farther away. This gives you the most reaction time. To change the setting for more dynamic driving, select the Near setting. This warns you of a possible collision when you are much closer to the vehicle in front of you. To change the FCW status, press and release the “Near” or “Far” button.
UNDERSTANDING YOUR INSTRUMENT PANEL 289 a balance of steering feel and steering effort. Press the back arrow button on the touchscreen to return to the When this feature is selected, it sets the strength of the previous menu. steering wheel feedback for potential lane departures. The amount of directional torque the steering system can • ParkSense® apply to the steering wheel to correct for vehicle lane The ParkSense® system will scan for objects behind the departure can be set at “Low,” “Medium” or “High.
290 UNDERSTANDING YOUR INSTRUMENT PANEL setting, indicating that the setting had been selected. Press the back arrow button on the touchscreen to return The Front ParkSense® Chime Volume settings can be to the previous menu. ParkSense® will retain its last selected from the DID or Uconnect® System. The chime known configuration state through ignition cycles. volume settings include LOW, MEDIUM, and HIGH. The factory default volume setting is MEDIUM.
UNDERSTANDING YOUR INSTRUMENT PANEL 291 • Blind Spot Alert When this feature is selected, the Blind Spot Alert feature Provides alerts, visual and/or audible, to indicate objects in your blind spot. The Blind Spot Alert feature can be activated in “Lights” mode. When this mode is selected, the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the exterior mirrors.
292 UNDERSTANDING YOUR INSTRUMENT PANEL next to setting, indicating that the setting had been • Rain Sensing Auto Wipers selected. Press the back arrow button on the touchscreen When this feature is selected, the system will automatito return to the previous menu. cally activate the windshield wipers if it senses moisture • ParkView® Backup Camera Delay on the windshield.
UNDERSTANDING YOUR INSTRUMENT PANEL 293 press the “+” or “-” button on the touchscreen to select After pressing the “Lights” button on the touchscreen the your desired time interval. Press the back arrow button on the touchscreen to return to the previous menu, or following settings will be available. push the back button on the faceplate.
294 UNDERSTANDING YOUR INSTRUMENT PANEL • Auto Dim High Beams — If Equipped When this feature is selected, the high beam headlights will activate/deactivate automatically under certain conditions. To make your selection, press the “Auto High Beams” button on the touchscreen, until a check-mark appears next to setting, indicating that the setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu, or push the back button on the faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL 295 or without the sound horn on lock feature selected. To After pressing the “Doors & Locks” button on the touch- make your selection, press the “Flash Lights with Lock” button on the touchscreen, until a check-mark appears screen the following settings will be available: next to setting, indicating that the setting has been • Auto Unlock On Exit selected.
296 UNDERSTANDING YOUR INSTRUMENT PANEL • Sound Horn With Remote Start When this feature is selected, the horn will sound when the remote start is activated. To make your selection, press the “Sound Horn with Remote Start” button on the touchscreen until a check-mark appears next to setting, showing that setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 297 setting, showing that the setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu. Refer to “Keyless Enter-N-Go™” in “Things To Know Before Starting Your Vehicle”.
298 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Start” button to select from “Off,” “Remote Start” or “All Starts” until a check-mark appears next to setting, showing that setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 299 NOTE: Bass/Mid/Treble allow you to simply slide your After pressing the “Audio” button on the touchscreen the finger up or down to change the setting as well as press directly on the desired setting. following settings will be available. Audio • Balance/Fade • Speed Adjusted Volume This feature allows you to adjust the Balance and Fade settings. Press and drag the speaker icon, use the arrows to adjust, or tap the ‘C’ icon to readjust to the center.
300 UNDERSTANDING YOUR INSTRUMENT PANEL • AUX Volume Offset — If Equipped This feature provides the ability to tune the audio level for portable devices connected through the AUX input. To make your selection, press the AUX Volume Match button on the touchscreen, choose a level from –3 to +3. Press the back arrow button on the touchscreen to return to the previous menu. • Loudness — If Equipped Loudness improves sound quality at lower volumes.
UNDERSTANDING YOUR INSTRUMENT PANEL 301 touchscreen, select the channels you would like to skip Restore Settings followed by pressing the back arrow button on the After pressing the “Restore Settings” button on the touchscreen. touchscreen the following settings will be available: • Subscription Information • Restore Settings New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your radio.
302 UNDERSTANDING YOUR INSTRUMENT PANEL Clear Personal Data System Information After pressing the “Clear Personal Data Settings” button After pressing the “System Information” button on the on the touchscreen the following settings will be avail- touchscreen the following information will be available: able: • System Information • Clear Personal Data When System Information is selected, a System Information When this feature is selected it will remove personal data screen will appear displaying the syste
UNDERSTANDING YOUR INSTRUMENT PANEL 303 WARNING! Measurement of vehicle statistics with the SRT Performance Pages is intended for off-highway or offroad use only and should not be done on any public roadways. It is recommended that these features be used in a controlled environment and within the limits of the law. The capabilities of the vehicle as measured by the Performance Pages must never be exploited in a reckless or dangerous manner, which can jeopardize the user’s safety or the safety of others.
304 UNDERSTANDING YOUR INSTRUMENT PANEL The following describes each feature and its operation: Home When Home is selected, the following options will be available: • A series of six images which can be selected by the user. • A left and right arrow to allow the user to scroll through vehicle images. • A short-cut to the SRT Drive Modes feature.
UNDERSTANDING YOUR INSTRUMENT PANEL 305 When the Timers Page is selected you will be able to select from following “Tickets”: Timers • Current Pressing the “Current” button displays a “real time” summary of performance timers. • Last Pressing the “Last” button displays the last recorded run of performance timers. • Best Pressing the “Best” button displays the best recorded run of performance timers, except for braking data.
306 UNDERSTANDING YOUR INSTRUMENT PANEL • With a USB jump drive installed, press the “USB” button to save to the jump drive. • Save Pressing the “Save” button will let you save the last run. Any saved run over 10, will overwrite the last saved run • With an SD Card installed, press the “SD Card” to save for Uconnect® System storage. The operation of the Save runs to the SD Card. feature is listed below: • Press the “Uconnect” button to save the runs to the Owner web page.
UNDERSTANDING YOUR INSTRUMENT PANEL 307 NOTE: The distance measurement will be aborted if the brake pedal is released or the parking brake is engaged, Displays the time it takes for the vehicle to go from 0 to before the vehicle comes to a complete stop. 60 mph (0 to 100 km/h). • Brake Speed • 0-100 MPH (0-160 km/h) Displays the speed the vehicle is traveling when the Displays the time it takes for the vehicle to go from 0 to brake pedal is depressed. 100 mph (0 to 160 km/h).
308 UNDERSTANDING YOUR INSTRUMENT PANEL Gauges 1 When selected, this screen displays the following values: • Coolant Temperature Shows the actual coolant temperature. • Oil Pressure Shows the actual oil pressure. • Oil Temperature Shows the actual oil temperature. • Battery Voltage Shows the actual battery voltage. SRT Performance Pages — Gauges 1 (6.2L) • Trans Oil Temp Shows the actual automatic transmission oil temperature.
UNDERSTANDING YOUR INSTRUMENT PANEL 309 • Oil Pressure Shows the actual oil pressure. Gauges 2 4 SRT Performance Pages — Gauges 1 (6.4L) When selected, this screen displays the following values: • Coolant Temperature Shows the actual coolant temperature. • Oil Temperature Shows the actual oil temperature. SRT Performance Pages — Gauges 2 (6.
310 UNDERSTANDING YOUR INSTRUMENT PANEL When selected, this screen displays the following values: • Battery Voltage Shows the actual battery voltage. • Intake Air Temperature Shows the actual intake air temperature. • Transmission Temperature Shows the actual transmission temperature. SRT Performance Pages — Gauges 2 (6.
UNDERSTANDING YOUR INSTRUMENT PANEL 311 When selected, this screen displays the following values: G-Force • Boost Pressure Shows the current value for boost pressure. • Air Fuel Ratio Shows the current value for the air fuel ratio. 4 • Inter-Cooler (I/C) Coolant Temperature Shows the current value for the I/C coolant temperature. • Intake Air Temperature Shows the actual intake air temperature.
312 UNDERSTANDING YOUR INSTRUMENT PANEL When G-Force is selected, the following features will be • Vehicle Speed available: Vehicle Speed measures the current speed of the vehicle • Lateral G-Force Left and Right in either mph or km/h, starting at 0 with no maximum The lateral g-force measures the (sideways) left and right value. force of the vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL 313 Engine 4 SRT Performance Pages — Engine (6.2L) When selected, this screen displays the following values: SRT Performance Pages — Engine (6.4L) • Vehicle Speed Shows the actual vehicle speed. • Instantaneous Horsepower/Kilowatts Shows the instantaneous horsepower.
314 UNDERSTANDING YOUR INSTRUMENT PANEL • Instantaneous Torque Shows the instantaneous torque. SRT Drive Modes Key FOB 6.2L Supercharged Engine — If Equipped • Oil Pressure (6.4L Only) Shows the actual oil pressure. • Gear Shows the current (or pending) operating gear of the vehicle. • Boost Pressure (6.2L Only) Shows the actual boost pressure.
UNDERSTANDING YOUR INSTRUMENT PANEL 315 If your vehicle is equipped with the 6.2L supercharged engine, it will support an additional engine power level configuration as part of SRT Drive Modes. Use of the RED key FOB unlocks the full potential of the engine’s output, and allows the driver to select from two power levels within Drive Modes Set-Up. Black Key FOB Use of the BLACK key FOB limits the driver to a reduced engine output.
316 UNDERSTANDING YOUR INSTRUMENT PANEL Your SRT vehicle is equipped with a Drive Modes feature which allows for coordinating the operation of various vehicle systems depending upon the type of driving behavior desired. The Drive Modes feature is controlled through the Uconnect® radio and may be accessed by performing any of the following: • Selecting “Drive Modes” from the “SRT & Apps” menu. • Selecting “Drive Modes” from within the Performance Pages menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 317 color red indicates “Track,” orange “Sport,” and yellow Track Mode “Street.” If the system status shown does not match the current drive mode set up, a message will be displayed indicating which values are not matching the current mode and why. NOTE: ESC Full-Off can be activated across all of the Drive Mode features by pushing and holding the ESC Off button on the instrument panel switch bank for five seconds.
318 UNDERSTANDING YOUR INSTRUMENT PANEL Sport Mode Default Mode Drive Modes (Sport) Drive Modes (Default) Pressing the “Sport” button on the touchscreen will activate the configuration for typical enthusiast driving. The Traction, Transmission, Steering, and Suspension systems are all set to their “Sport” settings highlighted in orange. The Paddle Shifters are enabled. The vehicle will start in Default Mode unless Valet mode is active.
UNDERSTANDING YOUR INSTRUMENT PANEL 319 this mode. The Steering and Suspension can be configured in either the “Street,” “Sport,” or “Track” modes and the Paddle Shifters may be enabled or disabled while in this mode. Custom Mode Custom Mode The Custom Mode may be selected quickly by pushing the SRT button on the instrument panel switch bank two times, or pressing the “Custom” button on the touchscreen.
320 UNDERSTANDING YOUR INSTRUMENT PANEL Custom Mode Set-Up Info Within the Custom Mode Set-Up screen, press the “info” button on the touchscreen then use the left / right arrows to scroll through all the available Drive Mode systems giving you a description of their operation and current configuration. Custom Mode Set-Up — 6.4L Example While in the Custom Drive Mode screen, press the “Custom Set-Up” button on the touchscreen to access the selectable options.
UNDERSTANDING YOUR INSTRUMENT PANEL 321 Horsepower — If Equipped With 6.2L Supercharged Engine • 700+ Press the “700+” button on the touchscreen to modify the output power of the engine to 700+ horsepower. NOTE: This selection is only available with the RED RKE Key Fob. • 500 Press the “500” button on the touchscreen to modify the output power of the engine to 500 horsepower. NOTE: This selection is available with the RED or BLACK RKE Key Fob. Horsepower — 6.
322 UNDERSTANDING YOUR INSTRUMENT PANEL Transmission — If Equipped With 8 Speed Transmission • Track Press the “Track” button on the touchscreen to provide the fastest shift speeds and will have the highest comfort trade-off. • Sport Press the “Sport” button on the touchscreen to provide faster shift speeds and will have a moderate comfort trade-off. • Street Press the “Street” button on the touchscreen to provide a balance of shift speed and comfort for typical daily driving.
UNDERSTANDING YOUR INSTRUMENT PANEL 323 Paddle Shifters • OFF Press the “OFF” button on the touchscreen to disable steering wheel paddle shifters. Traction 4 Paddle Shifters • ON Press the “ON” button on the touchscreen to enable steering wheel paddle shifters.
324 UNDERSTANDING YOUR INSTRUMENT PANEL • Track Suspension Press the “Track” button on the touchscreen to modify traction control to optimize track performance with the least stability control. • Sport Press the “Sport” button on the touchscreen to turn off traction control and reduce stability control. • Street Press the “Street” button on the touchscreen to provide full traction control and full stability control.
UNDERSTANDING YOUR INSTRUMENT PANEL 325 • Sport • Street Press the “Sport” button on the touchscreen to provide a Press the “Street# button on the touchscreen to adjust the firmer suspension stiffness with moderate comfort trade- steering effort to the lowest level. off. Race Options • Street Press the “Street” button on the touchscreen to provide a balance of suspension stiffness and ride comfort for typical daily driving. Steering — If Equipped With 6.
326 UNDERSTANDING YOUR INSTRUMENT PANEL Press the “Race Options” button on the touchscreen while in the Drive Modes screen, to display the vehicle’s Launch Control screen. Within Race Options, you can activate, deactivate, and adjust the RPM values for the Launch Control and Shift Light features. Launch Control WARNING! Launch Mode is intended for off-highway or off-road use only and should not be used on any public roadways.
UNDERSTANDING YOUR INSTRUMENT PANEL 327 “Launch RPM Set-Up” to set the holding RPM. Launch Mode can be turned on or off by either pushing the Launch Control button on the instrument panel switch bank (if activated), or by pressing the “Cancel Launch Mode” button on the touchscreen. NOTE: Launch RPM Set-Up cannot be accessed unless Launch Mode is deactivated. 4 Launch RPM Set-Up To adjust the Launch RPM, drag the slider bar or press the arrows on the touchscreen to adjust the holding RPM.
328 UNDERSTANDING YOUR INSTRUMENT PANEL Shift Light Shift Light RPM Set-Up Shift Light To actuate the Shift Light feature, press the “Shift Light” button on the touchscreen, then press the “Shift Light On” button on the touchscreen. Activation is shown on the Driver Information Display (DID). Pressing the “Shift Light RPM Set-Up” button on the touchscreen will take you to the Shift Light RPM Set-Up screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 329 500 RPM, ranging from 2000–6000 RPM (6.2L) and 2000– Valet Mode 6250 RPM (6.4L.) The Shift Light setup screen may only be accessed if the feature is enabled, press the “Reset to factory default” button on the touchscreen to change back to factory settings, or press the “Shift Light Off” button on the touchscreen to turn the system off completely.
330 UNDERSTANDING YOUR INSTRUMENT PANEL While in Valet Mode the following vehicle configurations are set and locked to prevent unauthorized modification: • Engine limited to the lowest power output state. • Transmission locks out access to first gear and upshifts earlier than normal. • Traction, Steering, and Suspension are set to their STREET settings. • Steering wheel paddle shifters are disabled. • The Drive Mode interface is not available.
UNDERSTANDING YOUR INSTRUMENT PANEL 331 NOTE: If your 4 digit PIN is lost or forgotten, the vehicle will exit Valet Mode after a battery disconnect for approximately one minute. Reconnect the battery and cycle the ignition to the RUN position, the vehicle will be in Default Mode. 4 Valet Mode Deactivation PIN The Valet Mode Deactivation key pad will then prompt you for your 4 digit PIN code, enter your PIN code and press the “OK” button on the touchscreen.
332 UNDERSTANDING YOUR INSTRUMENT PANEL performance. Increased engine exhaust noise and/or vibration may be noticed while Eco is active. This is normal and a result of the increased amount of operating conditions where the vehicle is allowed to operate in four cylinder shutoff mode (6.4L Only). ECO Mode The Paddle Shifters will be disabled while in Eco mode. • Changing the Drive Mode will deactivate Eco. • Eco will be disabled when another Drive Mode is selected or “Eco” button is pressed.
UNDERSTANDING YOUR INSTRUMENT PANEL 333 iPod®/USB/MP3 CONTROL This feature allows an iPod® or an external USB device to be plugged into the USB port. iPod® control supports Mini, 4G, Photo, Nano, 5G iPod® and iPhone® devices. Some iPod® software versions may not fully support the iPod® control features. Please visit Apple’s website for software updates. 4 The Media hub also allows the use of an SD card. For further information, refer to the Uconnect® Supplement Manual.
334 UNDERSTANDING YOUR INSTRUMENT PANEL Located on the rear of the front center console are dual STEERING WHEEL AUDIO CONTROLS — IF USB “Charge Only” ports. EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. Rear USB Charging Ports The USB “Charge Only” ports will recharge battery operated USB devices when connected.
UNDERSTANDING YOUR INSTRUMENT PANEL 335 The right-hand control is a rocker-type switch with a push-button in the center and controls the volume and mode of the sound system. Pushing the top of the rocker switch will increase the volume, and pushing the bottom of the rocker switch will decrease the volume. The button located in the center of the left-hand control will tune to the next preset station that you have programmed in the radio preset button.
336 UNDERSTANDING YOUR INSTRUMENT PANEL The radiated output power of the internal wireless radio is far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio will be used in such a manner that the radio is 20 cm or further from the human body. This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference.
UNDERSTANDING YOUR INSTRUMENT PANEL 337 NOTE: • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
338 UNDERSTANDING YOUR INSTRUMENT PANEL Dual Zone Automatic Climate Controls With Touchscreen Buttons On The Faceplate Buttons On The Touchscreen Buttons on the touchscreen are accessible on the Uconnect® system screen. The buttons on the faceplate are located below the Uconnect® screen. Uconnect® 8.
UNDERSTANDING YOUR INSTRUMENT PANEL 339 Button Descriptions (Applies To Both Buttons On The 4. AUTO Operation Button Faceplate And Buttons On The Touchscreen) Automatically controls the interior cabin temperature by 1. MAX A/C Button adjusting airflow distribution and amount. Performing Press and release to change the current setting, the this function will cause the system to switch between indicator illuminates when MAX A/C is ON. Performing manual mode and automatic modes.
340 UNDERSTANDING YOUR INSTRUMENT PANEL 6. Rear Defrost Button Press and release this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after 10 minutes. CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window.
UNDERSTANDING YOUR INSTRUMENT PANEL 341 8. Passenger Temperature Control Down Button 10. Blower Control Provides the passenger with independent temperature control. Push the button on the faceplate for cooler temperature settings or on the touchscreen, press and slide the temperature bar button towards the blue arrow for cooler temperature settings. Blower control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available.
342 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: BI-LEVEL mode is designed under comfort conditions to provide cooler air out of the panel outlets and The airflow distribution mode can be adjusted so air comes warmer air from the floor outlets. from the instrument panel outlets, floor outlets, defrost • Floor Mode outlets and demist outlets. The Mode settings are as follows: Air comes from the floor outlets.
UNDERSTANDING YOUR INSTRUMENT PANEL 343 NOTE: In Sync mode, this button will also automatically adjust the passenger temperature setting at the same Provides the driver with independent temperature contime. trol. Push the button on the faceplate for cooler temperature settings or on the touchscreen, press and slide the Climate Control Functions temperature bar button towards the blue arrow for cooler A/C (Air Conditioning) temperature settings.
344 UNDERSTANDING YOUR INSTRUMENT PANEL • If your air conditioning performance seems lower than Recirculation Control expected, check the front of the A/C condenser (located in front of the radiator), for an accumulation of When outside air contains smoke, odors, or dirt or insects. Clean with a gentle water spray from high humidity, or if rapid cooling is desired, the front of the radiator and through the condenser. you may wish to recirculate interior air by pressing the Recirculation control button.
UNDERSTANDING YOUR INSTRUMENT PANEL 345 NOTE: In cold weather, use of Recirculation mode may 2. Next, adjust the temperature you would like the system to maintain by adjusting the driver and paslead to excessive window fogging. The recirculation senger temperature control buttons. Once the desired feature may be unavailable (button on touchscreen temperature is displayed, the system will achieve and greyed out) if conditions exist that could create fogging automatically maintain that comfort level.
346 UNDERSTANDING YOUR INSTRUMENT PANEL • The temperature can be displayed in U.S. or Metric units by selecting the US/M customer-programmable feature. Refer to the “Uconnect® System Settings” in this section of the manual. The operator can also select the direction of the airflow by selecting one of the available mode settings. A/C operation and Recirculation control can also be manually selected in Manual operation.
UNDERSTANDING YOUR INSTRUMENT PANEL 347 Summer Operation Vacation Storage The engine cooling system must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating. A solution of 50% OAT (Organic Additive Technology) coolant that meets the requirements of Chrysler Material Standard MS.90032 and 50% water is recommended. Refer to “Maintenance Procedures” in “Maintaining Your Vehicle” for proper coolant selection.
348 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: A/C Air Filter • Recirculate without A/C should not be used for long The climate control system filters outside air containing dust, pollen and some odors. Strong odors cannot be periods, as fogging may occur. totally filtered out. Refer to “Maintenance Procedures” in • Automatic Temperature Controls (ATC) will automati- “Maintaining Your Vehicle” for filter replacement instruccally adjust the climate control settings to reduce or tions.
UNDERSTANDING YOUR INSTRUMENT PANEL 349 Manual Control Setting Suggestions for Various Weather Conditions 4
350 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® VOICE RECOGNITION QUICK TIPS Introducing Uconnect® Start using Uconnect® Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect® 5.0 or 8.4A/8.4AN system. Uconnect® 8.4AN If you see the icon on your touchscreen, you have the Uconnect® 8.4AN system. If not, you have a Uconnect® 8.4A system.
UNDERSTANDING YOUR INSTRUMENT PANEL 351 4. Each time you give a Voice Command, you must first push either the VR or Phone button, wait until after All you need to control your Uconnect® system with the beep, then say your Voice Command. your voice are the buttons on your steering wheel. 1. Visit UconnectPhone.com to check mobile device and 5.
352 UNDERSTANDING YOUR INSTRUMENT PANEL Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect® system. Push the VR button . After the beep, say: • Cancel to stop a current voice session • Help to hear a list of suggested Voice Commands • Repeat to listen to the system prompts again Uconnect® Voice Command 1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive A Text 2 — For all radios: Push To Begin Radio or Media functions. For 8.4A/8.
UNDERSTANDING YOUR INSTRUMENT PANEL 353 Push the VR button . After the beep, say: • Tune to ninety-five-point-five FM • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, push the VR button and say “Help.” The system will provide you with a list of commands. Uconnect® 8.4A/8.4AN Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like to hear.
354 UNDERSTANDING YOUR INSTRUMENT PANEL . After the beep, say one of the Push the VR button following commands and follow the prompts to switch your media source or choose an artist. • Change source to Bluetooth® • Change source to iPod® • Change source to USB • Play artist Beethoven; Play album Greatest Hits; Play song Moonlight Sonata; Play genre Classical Uconnect® 8.4A/8.4AN Radio Media Uconnect® offers connections via USB, SD, Bluetooth® and auxiliary ports (If Equipped).
UNDERSTANDING YOUR INSTRUMENT PANEL 355 . After the beep, say one of Push the Phone button the following commands: • Call John Smith • Dial 123-456-7890 and follow the system prompts • Redial (call previous outgoing phone number) • Call back (call previous incoming phone number) Uconnect® 8.4A/8.4AN Media Phone Making and answering hands-free phone calls is easy with Uconnect®. When the Phonebook button is illuminated on your touchscreen, your system is ready. Check UconnectPhone.
356 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Once an incoming text message is read to you, push . After the beep, say: “Reply.” the Phone button 2. Listen to the Uconnect® prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts. Uconnect® 8.4A/8.4AN Phone Voice Text Reply Uconnect® will announce incoming text messages. Push and say Listen. (Must have comthe Phone button patible mobile phone paired to Uconnect® system.) PRE-DEFINED VOICE TEXT REPLY RESPONSES Yes.
UNDERSTANDING YOUR INSTRUMENT PANEL 357 TIP: Your mobile phone must have the full implementation of the Message Access Profile (MAP) to take advantage of this feature. For details about MAP, visit UconnectPhone.com. Apple iPhone® iOS6 or later supports reading incoming text messages only. TIP: Voice Command for Climate may only be used to adjust the interior temperature of your vehicle. Voice Command will not work to adjust the heated seats or steering wheel (If equipped). Climate (8.4A/8.
358 UNDERSTANDING YOUR INSTRUMENT PANEL Navigation (8.4A/8.4AN) The Uconnect® navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go. (Navigation is optional on the Uconnect® 8.4A system. See your dealer to activate navigation at any time.) 1. To enter a destination, press the VR button the beep, say: . After • For the 8.4A Uconnect® System, say: “Enter state.” • For the 8.
UNDERSTANDING YOUR INSTRUMENT PANEL 359 press the Apps button on the 8.4-inch touchscreen to get started. Detailed registration instructions can be found on the next page. Roadside Assistance Call Wi-Fi Hotspot*** **If vehicle is equipped. *Uconnect® Access is available only on equipped vehicles purchased within the continental United States and ***Extra charges apply. Alaska. Services can only be used where coverage is Register (8.4A/8.4AN) available; see coverage map for details. 1.
360 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Click on the link inside the email within 72 hours and complete the easy online registration process to create a personal Mopar® Owner Connect account linked to your vehicle. Mobile App (8.4A/8.4AN) Securely link your mobile device to your vehicle with the Uconnect® Access App. Once you have downloaded the App, you may start your vehicle or lock it from virtually any distance. (Vehicle must be properly equipped with factory-installed Remote Start.
UNDERSTANDING YOUR INSTRUMENT PANEL 361 Download the Uconnect® Access App to a compatible 2. Listen to the prompt. After the beep, dictate the message you would like to send. Wait for Uconnect® Apple® or Android® mobile devices. All you need to do to process your message. is: 1. After registering with Uconnect® Access, log on to 3. The Uconnect® system will repeat your message and provide a variety of options to add to, delete, send or your Mopar® Owner Connect account at hear the message again.
362 UNDERSTANDING YOUR INSTRUMENT PANEL Yelp® (8.4A/8.4AN) Once registered with Uconnect® Access, you can use your voice to search for the most popular places or things around you. 1. Press the VR button “Launch YELP.” . After the beep, say: 2. Once the YELP® home screen appears on the touchscreen, press the VR button , then say: “YELP search.” 3. Listen to the system prompts and after the beep, tell Yelp® Uconnect® the place or business that you’d like Uconnect® to find. SiriusXM Travel Link™ (8.4A/8.
UNDERSTANDING YOUR INSTRUMENT PANEL 363 Press the VR button following commands: . After the beep, say one of the • Show fuel prices • Show 5 - day weather forecast • Show extended weather 4 TIP: Traffic alerts are not accessible with Voice Command. SiriusXM Travel Link™ Additional Information © 2014 Chrysler Group LLC. All rights reserved. Mopar and Uconnect are registered trademarks and Mopar Owner Connect is a trademark of Chrysler Group LLC. Android is a trademark of Google Inc.
364 UNDERSTANDING YOUR INSTRUMENT PANEL related marks and logos are trademarks of SiriusXM Radio Inc. Yelp, Yelp logo, Yelp burst and related marks are registered trademarks of Yelp. Uconnect® System Support: • U.S. residents call DriveUconnect.com 1-877-855-8400 or visit • Canadian residents call 1-800-465-2001 (English) or 1-800-387-9983 (French) or visit DriveUconnect.ca Mon. – Fri., 7:00 am – 12:00 am, ET Sat., 8:00 am – 10:00 pm, ET Sun.
STARTING AND OPERATING CONTENTS ! STARTING PROCEDURES . . . . . . . . . . . . . . . .369 ! AUTOMATIC TRANSMISSION . . . . . . . . . . . .374 ▫ Automatic Transmission . . . . . . . . . . . . . . . .369 ▫ Key Ignition Park Interlock. . . . . . . . . . . . . . .376 ▫ Keyless Enter-N-Go™ . . . . . . . . . . . . . . . . . .370 ▫ Brake/Transmission Shift Interlock System . . .376 ▫ Normal Starting. . . . . . . . . . . . . . . . . . . . . . .370 ▫ Eight-Speed Automatic Transmission . . . . . . .
366 STARTING AND OPERATING ! DRIVING ON SLIPPERY SURFACES . . . . . . . . .397 ! ELECTRONIC BRAKE CONTROL SYSTEM . . . .406 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . .397 ▫ Anti-Lock Brake System (ABS) . . . . . . . . . . . .406 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . .398 ▫ Traction Control System (TCS) . . . . . . . . . . . .409 ! DRIVING THROUGH WATER . . . . . . . . . . . . .398 ▫ Brake Assist System (BAS) . . . . . . . . . . . . . . .
STARTING AND OPERATING 367 ▫ Tire Identification Number (TIN). . . . . . . . . . .421 ▫ Life Of Tire . . . . . . . . . . . . . . . . . . . . . . . . .439 ▫ Tire Terminology And Definitions . . . . . . . . . .423 ▫ Replacement Tires . . . . . . . . . . . . . . . . . . . . .439 ▫ Tire Loading And Tire Pressure . . . . . . . . . . .424 ! TIRE CHAINS (TRACTION DEVICES) . . . . . . .441 ! TIRES — GENERAL INFORMATION . . . . . . . .429 ! TIRE ROTATION RECOMMENDATIONS . . . . .442 ▫ Tire Pressure . . . . . .
368 STARTING AND OPERATING ▫ MMT In Gasoline . . . . . . . . . . . . . . . . . . . . .452 ▫ Gross Vehicle Weight Rating (GVWR) . . . . . . .459 ▫ Materials Added To Fuel . . . . . . . . . . . . . . . .453 ▫ Gross Axle Weight Rating (GAWR) . . . . . . . . .459 ▫ Fuel System Cautions. . . . . . . . . . . . . . . . . . .453 ▫ Overloading . . . . . . . . . . . . . . . . . . . . . . . . .460 ▫ Carbon Monoxide Warnings . . . . . . . . . . . . .454 ▫ Loading . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 369 STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • When leaving the vehicle, always make sure the ignition is in the OFF position, remove the Key Fob from the vehicle, and lock the vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
370 STARTING AND OPERATING CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal.
STARTING AND OPERATING 371 4. If you wish to stop the cranking of the engine prior to the engine starting, push the button again. NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. To Turn Off The Engine Using ENGINE START/STOP Button will shut off. The ignition switch position will remain in the ACC position until the shift lever/gear selector is in PARK and the button is pressed twice to the OFF position.
372 STARTING AND OPERATING ENGINE START/STOP Button Functions — With Driver’s Foot OFF The Brake Pedal (In PARK Or NEUTRAL Position) Extreme Cold Weather (Below –20°F Or −29°C) To ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (availThe ENGINE START/STOP button operates similar to an able from your authorized dealer) is recommended. ignition switch. It has three positions, OFF, ACC, RUN.
STARTING AND OPERATING 373 WARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. • If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle.
374 STARTING AND OPERATING After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED WARNING! Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution. The engine block heater warms the engine, and permits AUTOMATIC TRANSMISSION quicker starts in cold weather.
STARTING AND OPERATING 375 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, turn the engine OFF, and remove the Key Fob. When the ignition is in the OFF position, the transmission is locked in PARK, securing the vehicle against unwanted movement.
376 STARTING AND OPERATING CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into or out of PARK or REVERSE only after the vehicle has come to a complete stop. • Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly pressing the brake pedal.
STARTING AND OPERATING 377 Eight-Speed Automatic Transmission The transmission gear range (PRNDM) is displayed both on the shift lever and in the Driver Information Display (DID). To select a gear range, press the lock button on the shift lever and move the lever rearward or forward.
378 STARTING AND OPERATING Only shift from DRIVE to PARK or REVERSE when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shifting between these gears. The transmission shift lever has PARK, REVERSE, NEUTRAL, DRIVE, and MANUAL (Autostick) shift positions. Manual shifts can be made using the Autostick shift control (refer to “AutoStick” in this section for further information).
STARTING AND OPERATING 379 Never attempt to use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a level surface, you may shift the transmission into PARK first, and then apply the parking brake. When parking on a hill, apply the parking brake before shifting the transmission to PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
380 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, turn the engine OFF, and remove the key fob. When the ignition is in the OFF position, the transmission is locked in PARK, securing the vehicle against unwanted movement.
STARTING AND OPERATING 381 CAUTION! • Look at the transmission gear position display and verify that it indicates the PARK position (P). • Before moving the shift lever out of PARK, you must start the engine and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • With brake pedal released, verify that the shift lever will not move out of PARK.
382 STARTING AND OPERATING WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause severe transmission damage.
STARTING AND OPERATING 383 During extremely cold temperatures (-22°F [-30°C] or below), transmission operation may be modified depending on engine and transmission temperature as well as vehicle speed. Normal operation will resume once the transmission temperature has risen to a suitable level. Mode is activated. In this mode, the transmission may operate only in certain gears, or may not shift at all. Vehicle performance may be severely degraded and the engine may stall.
384 STARTING AND OPERATING 2. Shift the transmission into PARK, if possible. If not, AUTOSTICK shift the transmission to NEUTRAL. Steering Wheel Mounted Paddle Shifters Or 3. Press and hold the ignition switch until the engine Console Mounted Shifter turns OFF. AutoStick is a driver-interactive transmission feature providing manual shift control, giving you more control of the vehicle. AutoStick allows you to maximize engine 5. Restart the engine. braking, eliminate undesirable upshifts and downshifts, 6.
STARTING AND OPERATING 385 DRIVE position). The current transmission gear will be displayed in the instrument cluster, along with a highlighted #M# (Manual) indication. When the shift lever is in the MANUAL (M) position, tap the shift lever forward (-) (or tap the (-) shift paddle on the steering wheel) to downshift the transmission to the next lower gear, (or tap the lever rearward (+) or tap the (+) shift paddle), to command an upshift.
386 STARTING AND OPERATING In AutoStick mode, the transmission will shift up or • The transmission will automatically downshift as the down when (+/-) is manually selected by the driver vehicle slows (to prevent engine lugging) and will (using the shift lever, or the shift paddles), unless an display the current gear. engine lugging or overspeed condition would result.
STARTING AND OPERATING 387 • Holding the (-) paddle depressed, or holding the shift lever in the (-) position, will downshift the transmission to the lowest gear possible at the current speed. • Transmission shifting will be more noticeable when AutoStick is engaged. WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury.
388 STARTING AND OPERATING • SPORT Mode — SPORT Mode is a pre-defined configuration optimized for typical enthusiast driving. The ABS, Transmission, Steering, and Suspension systems are all set to their SPORT settings. Steering wheel mounted paddle shifters are enabled. • CUSTOM — CUSTOM Mode allows the driver to create a custom vehicle configuration that is saved for quick selection of favorite settings.
STARTING AND OPERATING 389 • Sport — provides a faster shift speed and has a moderate comfort trade-off. • Street — provides a balance of shift speed and comfort for typical daily driving. Paddles — If Equipped • On — enables steering wheel mounted paddle shifters. • Off — disables steering wheel mounted paddle shifters.
390 STARTING AND OPERATING Suspension (Susp) Engine Power — 6.2L Supercharged Engine Only • Track — provides the firmest possible suspension • 700+ HP — Provides engine output power to 700+ stiffness with the highest amount of comfort trade-off. horsepower • Sport — provides a firmer suspension stiffness with NOTE: This selection is only available with the RED RKE moderate comfort trade-off. Key Fob “700+ HP”.
STARTING AND OPERATING 391 (active dampening system) stiffness may be config- • Transmission locks out access to first gear and shifts ured to either the STREET, SPORT or TRACK settings earlier than normal. within this mode. Steering wheel mounted paddle • Traction, Steering and Suspension are forced to shifters may be enabled or disabled while in this mode STREET settings. as well. • Steering wheel mounted paddle shifters are disabled.
392 STARTING AND OPERATING • The vehicle will restart with VALET active if VALET quarter mile and zero to sixty times are desired. The system is not intended to compensate for lack of driver was active when the vehicle was last shut down. experience or familiarity with the race track. Use of this • Eco (Automatic Transmission only) — Eco modifies feature in low traction (cold, wet, gravel, etc.
STARTING AND OPERATING 393 • Launch Control is intended to be used on dry, paved 3. Press the “Activate Launch Mode” button on the road surfaces only. Use on slippery or loose surfaces touchscreen. may cause damage to vehicle components and is not 4. Make sure the vehicle is not moving. recommended. Launch Control is available when the following proce- 5. Make sure the steering wheel is pointing straight. dure is followed: 6. Hold the brake and make sure the vehicle is in “Drive”. 1.
394 STARTING AND OPERATING 9. Keep the vehicle pointed straight. NOTE: After launch control has been aborted, ESC will Launch control will be active until the vehicle reaches return to its current ESC mode. 62 mph (100 km/h), at which point the ESC system will CAUTION! return to its current ESC mode. Launch control will abort before launch completion, Do not attempt to shift when the drive wheels are display “Launch Aborted” in the cluster and return to spinning and do not have traction.
STARTING AND OPERATING 395 • Prior to each track event/day, verify all fluids are at the correct levels. Refer to “Fluid Capactites” in Maintaining Your Vehicle for further information. • Prior to each track event, verify the front and rear brake pads have more than ½ pad thickness remaining. If the brake pads require changing, please burnish prior to track outing at full pace. warm/hot weather to improve cooling airflow to critical powertrain and cooling system components.
396 STARTING AND OPERATING NOTE: It is recommended that you target 40psi Hot Tire 2. Lap the track in this manner until you start smelling Pressure at the conclusion of each track session. Starting the brakes. Continue for another ½ lap at speed, then at 32psi Front & 30psi Rear Cold and adjusting based on do a two lap cool down with minimal brake applies. ambient & track conditions is recommended. Tire presMake sure the brakes are not smoking.
STARTING AND OPERATING 397 6. Sometimes, a second burnish session is required. If the DRIVING ON SLIPPERY SURFACES pads start smelling in the next track session, reduce Acceleration speed and braking decel to burnish targets and follow Rapid acceleration on snow covered, wet, or other slipstep 2-4. pery surfaces may cause the driving wheels to pull 7. New pads installed on old rotors still need to be erratically to the right or left. This phenomenon occurs burnished.
398 STARTING AND OPERATING Your vehicle may be equipped with a Limited Slip When driving on wet or slushy roads, it is possible for a Differential (LSD) that reduces, but does not eliminate, wedge of water to build up between the tire and road the amount of wheel slip across a given axle for improved handling. surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping DRIVING THROUGH WATER ability.
STARTING AND OPERATING 399 WARNING! (Continued) WARNING! (Continued) your vehicle away swiftly. Failure to follow this warning may result in injuries that are serious or fatal to you, your passengers, and others around you. Although your vehicle is capable of driving through shallow standing water, consider the following Cautions and Warnings before doing so. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances.
400 STARTING AND OPERATING CAUTION! (Continued) CAUTION! (Continued) • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water. • Do not exceed 5 mph (8 km/h) when driving through standing water. This will minimize wave effects. • Driving through standing water may cause damage to your vehicle’s drivetrain components. Always inspect your vehicle’s fluids (i.e., engine oil, transmission, axle, etc.
STARTING AND OPERATING 401 WARNING! Continued operation with reduced assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. If the Steering icon is displayed and the “SERVICE POWER STEERING” or the “POWER STEERING ASSIST OFF – SERVICE SYSTEM” message is displayed within the Driver Information Display (DID), this indicates the vehicle needs to be taken to the dealer for service.
402 STARTING AND OPERATING If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these conditions, you will observe a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers. NOTE: • Increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that there is a problem with the power steering system.
STARTING AND OPERATING 403 NOTE: This system may take some time to return to full functionality after a battery disconnect. PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied and place the shift lever/gear selector in the PARK position. The foot operated parking brake is located below the lower left corner of the instrument panel. To apply the park brake, firmly push the park brake pedal fully.
404 STARTING AND OPERATING NOTE: • When the parking brake is applied and the transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied. It does not show the degree of brake application.
STARTING AND OPERATING 405 WARNING! (Continued) CAUTION! • Do not leave the Key Fob in or near the vehicle (or in a location accessible to children), and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™ in the ACC or ON/RUN mode. A child could operate power windows, other controls, or move the vehicle. • Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a collision.
406 STARTING AND OPERATING In the event power assist is lost for any reason (for example, repeated brake applications with the engine OFF) the brakes will still function. The effort required to brake the vehicle will be much greater than that required with the power system operating. NOTE: Your vehicle is equipped with a high performance braking system. The brake pads are a semimetallic compound, which offer superior fade resistance for consistent operation.
STARTING AND OPERATING 407 ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can include ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops. You also may experience the following when the brake system goes into anti-lock: • The ABS motor running (it may continue to run for a short time after the stop). • The clicking sound of solenoid valves. • Brake pedal pulsations.
408 STARTING AND OPERATING WARNING! (Continued) • The ABS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning.
STARTING AND OPERATING 409 Warning Light” does not come on when the ignition will allow more engine torque to be applied to the wheel switch is turned to the ON position, have the bulb that is not spinning. This feature remains active even if TCS and ESC are in the “Sport Mode (Partial Off)” or #Track repaired as soon as possible. Mode (Full Off)# mode. Refer to “Electronic Stability ConIf both the “Brake Warning Light” and the “Anti-Lock trol (ESC)” in this section for more information.
410 STARTING AND OPERATING WARNING! The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The BAS cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. The capabilities of a BAS-equipped vehicle must never be exploited in a reckless or dangerous manner that could jeopardize the user’s safety or the safety of others.
STARTING AND OPERATING 411 WARNING! The Electronic Stability Control System (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent all accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. ESC also cannot prevent accidents resulting from loss of vehicle control due to inappropriate driver input for the conditions.
412 STARTING AND OPERATING • To improve the vehicle’s traction when driving with snow chains, or when starting off in deep snow, sand, Track Mode is intended to be used when driving on a or gravel, it may be desirable to switch to the “Sport track. This raises the threshold for ESC activation further Mode” by momentarily pressing the “ESC Off” switch. than Sport and also has track tuned TCS to improve Once the situation requiring “Sport Mode” is overvehicle performance while on a road course type track.
STARTING AND OPERATING 413 Full Off This mode is intended for off-highway or off-road use only and should not be used on any public roadways. In this mode, all TCS and ESC stability features are turned OFF. To enter the “Full Off” mode, press and hold the “ESC Off” switch for five seconds while the vehicle is stopped with the engine running. After five seconds, a chime will sound, the #ESC OFF Indicator Light# will illuminate, and the “ESC off” message will appear in the Driver Information Display (DID).
414 STARTING AND OPERATING • Gear selection matches vehicle uphill direction (i.e., vehicle facing uphill is in forward gear; vehicle backThe HSA system is designed to assist the driver when ing uphill is in REVERSE gear). starting a vehicle from a stop on a hill. HSA will maintain the level of brake pressure the driver applied for a short HSA will work in REVERSE and all forward gears when period of time after the driver takes their foot off of the the activation criteria have been met.
STARTING AND OPERATING 415 Towing With HSA HSA Off HSA will provide assistance when starting on a grade If you wish to turn off the HSA system, it can be done in when pulling a trailer. the Uconnect® settings. Refer to #Uconnect® Settings# in #Understanding Your Instrument Panel# for further information. WARNING! • HSA is not a parking brake. Always apply the parking brake fully when leaving your vehicle. Also, be certain to leave the transmission in PARK.
416 STARTING AND OPERATING Rain Brake Support malfunction has been detected in the ESC system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. Rain Brake Support may improve braking performance in wet conditions.
STARTING AND OPERATING 417 NOTE: Synchronizing ESC • The “ESC Off Indicator Light” and the “ESC Activation/Malfunction Indicator Light” come on momentarily each time the ignition switch is placed in the ON/RUN position. • Each time the ignition is cycled to the ON/RUN position, the ESC system will be ON even if it was cycled off previously, except for when the vehicle is started while in 4L Range. • The ESC system will make buzzing or clicking sounds when it is active.
418 STARTING AND OPERATING TIRE SAFETY INFORMATION NOTE: Tire Markings • P (Passenger) — Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European — Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter #P# is absent from this tire size designation.
STARTING AND OPERATING 419 • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure comstandards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall. Example: 31x10.5 R15 LT. the sidewall preceding the size designation. Example: T145/80D18 103M.
420 STARTING AND OPERATING EXAMPLE: – Ratio of section height to section width of tire, or 10.
STARTING AND OPERATING 421 EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or • C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load – Maximum load indicates the maximum load this tire is designed to carry Maximum Pressure – Maximum pressure indicates the maximum permissible cold tir
422 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S.
STARTING AND OPERATING 423 Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
424 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
STARTING AND OPERATING 425 Tire And Loading Information Placard 5 Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle.
426 STARTING AND OPERATING 4. Cold tire inflation pressures for the front, rear, and To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of spare tires. occupants and cargo should never exceed XXX lbs or Loading XXX kg” on the Tire and Loading Information placard. The vehicle maximum load on the tire must not exceed The combined weight of occupants, cargo/luggage and the load carrying capacity of the tire on your vehicle.
STARTING AND OPERATING 427 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
428 STARTING AND OPERATING
STARTING AND OPERATING 429 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
430 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Fuel Economy Underinflated tires will increase tire rolling resistance resulting in higher fuel consumption.
STARTING AND OPERATING 431 At least once a month: mile (1.6 km) after sitting for a minimum of three hours. The cold tire inflation pressure must not exceed the • Check and adjust tire pressure with a good quality maximum inflation pressure molded into the tire sidepocket-type pressure gauge. Do not make a visual wall. judgement when determining proper inflation.
432 STARTING AND OPERATING Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) during operation. DO NOT reduce this normal pressure build up or your tire pressure will be too low. Tire Pressures For High Speed Operation WARNING! High speed driving with your vehicle under maximum load is dangerous. The added strain on your tires could cause them to fail. You could have a serious collision. Do not drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
STARTING AND OPERATING 433 Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (spring, summer, fall and winter). Traction levels may vary be• The tire has not been driven on when flat. tween different all season tires.
434 STARTING AND OPERATING Summer tires do not contain the all season designation or mountain/snowflake symbol on the tire sidewall. Use summer tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. WARNING! Do not use summer tires in snow/ice conditions. You could lose vehicle control, resulting in severe injury or death. Driving too fast for conditions also creates the possibility of loss of vehicle control.
STARTING AND OPERATING 435 While studded tires improve performance on ice, skid and traction capability on wet or dry surfaces may be poorer than that of non-studded tires. Some states prohibit studded tires; therefore, local laws should be checked before using these tire types. Run Flat Tires — If Equipped Spare Tires — If Equipped NOTE: For vehicles equipped with Tire Service Kit instead of a spare tire, please refer to “Tire Service Kit” in “What To Do In Emergencies” for further information.
436 STARTING AND OPERATING rotation for your vehicle. If your vehicle has this option, Do not install a wheel cover or attempt to mount a refer to an authorized tire dealer for the recommended conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tire. tire rotation pattern. Do not install more than one compact spare tire and Compact Spare Tire — If Equipped wheel on the vehicle at any given time. The compact spare is for temporary emergency use only.
STARTING AND OPERATING 437 your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the The full size spare is for temporary emergency use only. first opportunity. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not. This spare WARNING! tire may have limited tread life. When the tread is worn to the tread wear indicators, the temporary use full size Limited-use spares are for emergency use only.
438 STARTING AND OPERATING Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires spin your vehicle’s wheels above 30 mph (48 km/h) or to help you in determining when your tires should be for longer than 30 seconds continuously without stop- replaced. ping. Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous.
STARTING AND OPERATING 439 These indicators are molded into the bottom of the tread • Performance tires, tires with a speed rating of V or higher, and summer tires typically have a reduced grooves. They will appear as bands when the tread depth tread life. Rotation of these tires per the vehicle mainbecomes a 1/16 of an inch (2 mm). When the tread is tenance schedule is highly recommended. worn to the tread wear indicators, the tire should be replaced.
440 STARTING AND OPERATING wear and correct cold tire inflation pressures. The manu- you may have on tire specifications or capability. Failure facturer strongly recommends that you use tires equiva- to use equivalent replacement tires may adversely affect lent to the originals in size, quality and performance the safety, handling, and ride of your vehicle. when replacement is needed. Refer to the paragraph on “Tread Wear Indicator.
STARTING AND OPERATING 441 WARNING! (Continued) • Never use a tire with a smaller load index or capacity, other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. You could lose control and have a collision. • Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control.
442 STARTING AND OPERATING CAUTION! (Continued) • Install chains on the rear wheels as tightly as possible and then retighten after driving about ½ mile (0.8 km). • Do not exceed 30 mph (48 km/h). • Drive cautiously and avoid severe turns and large bumps, especially with a loaded vehicle. • Use on rear wheels only. • Do not drive for a prolonged period on dry pavement. • Observe the tire chain manufacturer’s instructions on the method of installation, operating speed, and conditions for use.
STARTING AND OPERATING 443 These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type tires. Rotation will increase tread life, help to maintain mud, snow, and wet traction levels, and contribute to a smooth, quiet ride. Refer to the “Maintenance Schedule” for the proper maintenance intervals. The reasons for any rapid or unusual wear should be corrected prior to rotation being performed.
444 STARTING AND OPERATING The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure. This is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three hour period.
STARTING AND OPERATING 445 For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approximately 23 psi (158 kPa). This tire pressure is sufficiently low enough to turn ON the “TPM Telltale Light.
446 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in • The TPMS is not intended to replace normal tire care the tire. and maintenance or to provide warning of a tire failure Premium System or condition. NOTE: • The TPMS should not be used as a tire pressure gauge The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to while adjusting your tire pressure.
STARTING AND OPERATING 447 • Various TPMS messages, which display in the Driver Tire Pressure Monitoring Low Pressure Warnings Information Display (DID), and • TPM Telltale Light TPMS Display The “TPM Telltale Light” will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires.
448 STARTING AND OPERATING original color, and the “TPM Telltale Light” will turn off. longer display, and a pressure value will display in place The vehicle may need to be driven for up to 20 minutes of the dashes. A system fault can occur due to any of the above 15 mph (24 km/h) in order for the TPMS to receive following: this information. 1. Signal interference due to electronic devices or driving next to facilities emitting the same radio frequencies as Service TPMS Warning the TPM sensors.
STARTING AND OPERATING 449 message is then followed with a graphic display with 3. After driving the vehicle for up to 20 minutes above pressure values still shown. This indicates that the pres15 mph (24 km/h), the “TPM Telltale Light” will flash sure values are still being received from the TPM sensors on and off for 75 seconds and then remain on solid. In but they may not be located in the correct vehicle addition, the DID will display a #SERVICE TPM position.
450 STARTING AND OPERATING low-pressure warning limit in any of the four active FUEL REQUIREMENTS road tires. The vehicle may need to be driven for up to 6.2L Supercharged And 6.4L Engine 20 minutes above 15 mph (24 km/h) in order for the These engines are designed to meet all TPMS to receive this information.
STARTING AND OPERATING 451 Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline.” Reformulated gasoline contain oxygenates and are specifically blended to reduce vehicle emissions and improve air quality. The use of reformulated gasoline is recommended. Properly blended reformulated gasoline will provide improved performance and durability of engine and fuel system components.
452 STARTING AND OPERATING E-85 Usage In Non-Flex Fuel Vehicles • Change the engine oil and oil filter. Non-Flex Fuel Vehicles (FFV) are compatible with gaso- • Disconnect and reconnect the battery to reset the line containing up to 10% ethanol (E10). Gasoline with engine controller memory. higher ethanol content may void the New Vehicle LimMore extensive repairs will be required for prolonged ited Warranty. exposure to E-85 fuel.
STARTING AND OPERATING 453 therefore, you should ask your gasoline retailer whether Fuel System Cautions the gasoline contains MMT. MMT is prohibited in Federal and California reformulated gasoline. CAUTION! Materials Added To Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost.
454 STARTING AND OPERATING CAUTION! (Continued) • The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer and may void or not be covered under the New Vehicle Limited Warranty.
STARTING AND OPERATING 455 WARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. 5 ADDING FUEL 1. Press the fuel filler door release switch (located in the driver’s door map pocket). Fuel Filler Door Release Switch 2. Open the fuel filler door.
456 STARTING AND OPERATING 3. There is no fuel filler cap. A flapper door inside the pipe seals the system. 4. Insert the fuel nozzle fully into the filler pipe – the nozzle opens and holds the flapper door while refueling. NOTE: Only the correct size nozzle opens the latches allowing the flapper door to open. 5. Fill the vehicle with fuel – when the fuel nozzle “clicks” or shuts off the fuel tank is full. Fuel Filler Door NOTE: In certain cold conditions, ice may prevent the fuel door from opening.
STARTING AND OPERATING 457 WARNING! Fuel Funnel CAUTION! To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. • Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and may cause the “Malfunction Indicator Light” to turn on.
458 STARTING AND OPERATING 2. Remove the access cover (located on the left side inner trim panel). Release Cable VEHICLE LOADING Access Cover 3. Pull the release cable. The load carrying capacity of your vehicle is shown on the “Vehicle Certification Label”. This information should be used for passenger and luggage loading as indicated.
STARTING AND OPERATING 459 Do not exceed the specified Gross Vehicle Weight Rating The bar code allows a computer scanner to read the VIN. (GVWR) or the Gross Axle Weight Rating (GAWR). Gross Vehicle Weight Rating (GVWR) Vehicle Certification Label The GVWR is the total allowable weight of your vehicle. Your vehicle has a Vehicle Certification Label affixed to This includes driver, passengers, and cargo. The total the drivers side B-Pillar or the rear of the driver’s door.
460 STARTING AND OPERATING WARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have a collision. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GAWR.
STARTING AND OPERATING 461 NOTE: • Refer to the “Vehicle Certification Label” affixed to the rear of the driver’s door for your vehicle’s GVWR and GAWRs. • Refer to the “Tire Placard” for your vehicle’s proper tire pressure. TRAILER TOWING Trailer towing with this vehicle is not recommended. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Recreational towing (with all four wheels on the ground, or using a towing dolly) is NOT ALLOWED.
WHAT TO DO IN EMERGENCIES CONTENTS ! HAZARD WARNING FLASHERS . . . . . . . . . . .464 ▫ Sealing A Tire With Tire Service Kit . . . . . . . . .472 ! IF YOUR ENGINE OVERHEATS . . . . . . . . . . . .464 ! JUMP-STARTING PROCEDURES . . . . . . . . . . .478 ! WHEEL AND TIRE TORQUE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . .465 ▫ Torque Specifications . . . . . . . . . . . . . . . . . . .465 ! TIRE SERVICE KIT — IF EQUIPPED . . . . . . . . .467 ▫ Tire Service Kit Storage . . . . . . . . . . . . .
464 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate action. Push the switch to turn on the Hazard Warning • On the highways — slow down. flasher.
WHAT TO DO IN EMERGENCIES 465 CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (116°C) or greater pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–110°C). If the pointer remains at 240°F (116°C) or greater and you hear a chime, turn the engine off immediately and call for service.
466 WHAT TO DO IN EMERGENCIES Wheel Mounting Surface Torque Patterns Tighten the lug nuts/bolts in a star pattern until each After 25 miles (40 km) check the lug nut/bolt torque to be nut/bolt has been tightened twice. sure that all the lug nuts/bolts are properly seated against the wheel.
WHAT TO DO IN EMERGENCIES 467 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. Tire Service Kit Storage The Tire Service Kit is located in the trunk. TIRE SERVICE KIT — IF EQUIPPED Small punctures up to ¼” (6 mm) in the tire tread can be sealed with Tire Service Kit. Foreign objects (e.g., screws or nails) should not be removed from the tire.
468 WHAT TO DO IN EMERGENCIES Tire Service Kit Components And Operation Using The Mode Select Knob And Hoses Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only. Use the Black Air Pump Hose (7) when selecting this mode.
WHAT TO DO IN EMERGENCIES 469 Using The Power Button Push and release the Power Button (4) once to turn On the Tire Service Kit. Push and release the Power Button (4) again to turn Off the Tire Service Kit. Using The Deflation Button Push the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated.
470 WHAT TO DO IN EMERGENCIES • When the Tire Service Kit sealant is in a liquid form, • Do not lift or carry the Tire Service Kit by the hoses. clean water, and a damp cloth will remove the material from the vehicle or tire and wheel components. Once WARNING! the sealant dries, it can easily be peeled off and • Do not attempt to seal a tire on the side of the properly discarded. vehicle closest to traffic.
WHAT TO DO IN EMERGENCIES 471 WARNING! (Continued) WARNING! (Continued) – If you are unsure of the condition of the tire or the wheel. • Keep Tire Service Kit away from open flames or heat source. • A loose Tire Service Kit thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the Tire Service Kit in the place provided. Failure to follow these warnings can result in injuries that are serious or fatal to you, your passengers, and others around you.
472 WHAT TO DO IN EMERGENCIES Sealing A Tire With Tire Service Kit (B) Setting Up To Use Tire Service Kit: (A) Whenever You Stop To Use Tire Service Kit: 1. Push in the Mode Select Knob (5) and turn to the Sealant Mode position. 1. Pull over to a safe location and turn on the vehicle’s Hazard Warning flashers. 2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the end of the hose. 2.
WHAT TO DO IN EMERGENCIES 473 (C) Injecting Tire Service Kit Sealant Into The Deflated Tire: • Always start the engine before turning ON the Tire Service Kit. Reconnect the Sealant Hose (6) to the valve stem. Check that the Mode Select Knob (5) is in the Sealant Mode position and not Air Mode. Push the Power Button (4) to turn On the Tire Service Kit. 2. Connect the Power Plug (8) to a different 12 Volt power outlet in your vehicle or another vehicle, if available.
474 WHAT TO DO IN EMERGENCIES If the sealant (white fluid) does flow through the If the tire does not inflate to at least 26 psi (1.8 Bar) Sealant Hose (6): pressure within 15 minutes: 1. Continue to operate the pump until sealant is no longer flowing through hose (typically takes 30 - 70 seconds). As the sealant flows through the Sealant Hose (6), the Pressure Gauge (3) can read as high as 70 psi (4.8 Bar). The Pressure Gauge (3) will decrease quickly from approximately 70 psi (4.
WHAT TO DO IN EMERGENCIES 475 3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the Tire Service Kit in the vehicle storage location. Quickly proceed to (D) “Drive Vehicle.” (D) Drive Vehicle: Immediately after injecting sealant and inflating the tire, drive the vehicle 5 miles (8 km) or 10 minutes to ensure distribution of the Tire Service Kit Sealant within the tire. Do not exceed 55 mph (90 km/h).
476 WHAT TO DO IN EMERGENCIES (E) After Driving: If the tire pressure is 19 psi (1.3 Bar) or higher: Pull over to a safe location. Refer to “Whenever You Stop 1. Push the Power Button (4) to turn on Tire Service Kit to Use Tire Service Kit” before continuing. and inflate the tire to the pressure indicated on the tire and loading information label on the driver-side door 1. Push in the Mode Select Knob (5) and turn to the Air opening. Mode position.
WHAT TO DO IN EMERGENCIES 477 5. Remove the Speed Limit sticker from the instrument 4. Clean any remaining sealant from the Tire Service Kit housing. panel after the tire has been repaired. 6. Replace the Sealant Bottle (1) and Sealant Hose (6) 5. Position the new Sealant Bottle (1) in the housing so that the Sealant Hose (6) aligns with the hose slot in assembly at your authorized dealer as soon as posthe front of the housing. Push the bottle into the sible.
478 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES WARNING! If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in Do not attempt jump-starting if the battery is frozen. another vehicle or by using a portable battery booster It could rupture or explode and cause personal injury. pack. Jump-starting can be dangerous if done improperly Preparations For Jump-Start so please follow the procedures in this section carefully.
WHAT TO DO IN EMERGENCIES 479 WARNING! Remote Battery Post Locations 1 — Remote Positive (+) Post 2 — Remote Negative (-) Post • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured.
480 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle.
WHAT TO DO IN EMERGENCIES 481 WARNING! Do not connect the jumper cable to the negative (-) post of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. Only use the specific ground point, do not use any other exposed metal parts. Disconnecting The Jumper Cables 1. Disconnect the negative (-) end of the jumper cable from the remote negative (-) post of the vehicle with the discharged battery. 2.
482 WHAT TO DO IN EMERGENCIES CAUTION! Accessories plugged into the vehicle power outlets draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough without engine operation, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved using a rocking motion.
WHAT TO DO IN EMERGENCIES 483 NOTE: Push the #ESC Off# switch, to place the Electronic Stability Control (ESC) system in #Partial Off# mode, before rocking the vehicle. Refer to “Electronic Brake Control” in “Starting And Operating” for further information. Once the vehicle has been freed, push the #ESC Off# switch again to restore #ESC On# mode.
484 WHAT TO DO IN EMERGENCIES MANUAL PARK RELEASE — 8 SPEED TRANSMISSION 2. Remove the console storage bin. WARNING! Always secure your vehicle by fully applying the parking brake, before activating the Manual Park Release. Activating the Manual Park Release will allow your vehicle to roll away if it is not secured by the parking brake or by proper connection to a tow vehicle.
WHAT TO DO IN EMERGENCIES 485 5. Insert the screwdriver into the slot in the center of the lever, and disengage the lever locking tab by pushing it to the right. The vehicle is now out of PARK and can be towed. Release the parking brake only when the vehicle is securely connected to a tow vehicle. 6 Locking Tab Tether Strap 6. While holding the locking tab in the disengaged To Reset The Manual Park Release: position, pull the tether strap to rotate the lever up and 1.
486 WHAT TO DO IN EMERGENCIES 2. Rotate the Manual Park Release lever forward and TOWING A DISABLED VEHICLE down, to its original position, until the locking tab This section describes procedures for towing a disabled snaps into place to secure the lever. vehicle using a commercial towing service. 3. Pull up gently on the tether strap to confirm that the lever is locked in its stowed position. 4. Tuck the tether strap into the base of the console. Reinstall the console storage bin.
WHAT TO DO IN EMERGENCIES 487 Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for this purpose, following equipment manufacturer’s instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to main structural members of the vehicle, not to bumpers or associated brackets. State and local laws regarding vehicles under tow must be observed. If you must use the accessories (wipers, defrosters, etc.
MAINTAINING YOUR VEHICLE CONTENTS ! ENGINE COMPARTMENT — 6.2L SUPERCHARGED . . . . . . . . . . . . . . . . . . . . . .491 ! ENGINE COMPARTMENT — 6.4L (392 HEMI) . . . . . . . . . . . . . . . . . . . . . . . . . . .492 ! ONBOARD DIAGNOSTIC SYSTEM — OBD II . .493 ! EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . .493 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . .499 ▫ Engine Air Cleaner Filter . . . . . . . . . . . . . . . .
490 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission . . . . . . . . . . . . . . . .519 ▫ Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . .521 ▫ Appearance Care And Protection From Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . .521 ! FUSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .528 ▫ Front Power Distribution Center (Fuses) . . . . .529 ▫ Rear Power Distribution Center (Fuses) . . . . .534 ! VEHICLE STORAGE . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 491 ENGINE COMPARTMENT — 6.
492 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 6.
MAINTAINING YOUR VEHICLE 493 ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
494 MAINTAINING YOUR VEHICLE Indicator Light (MIL)” is functioning and is not on when 2. As soon as you cycle the ignition switch to the ON the engine is running, and that the OBD II system is position, you will see the Malfunction Indicator Light ready for testing. (MIL) symbol come on as part of a normal bulb check. Normally, the OBD II system will be ready. The OBD II 3.
MAINTAINING YOUR VEHICLE 495 recently serviced or had a battery failure or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD II system to update. A recheck with the above test routine may then indicate that the system is now ready. DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner.
496 MAINTAINING YOUR VEHICLE MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides those maintenance items specified in the fixed “Maintenance Schedule”, there are other components which may require servicing or replacement in the future.
MAINTAINING YOUR VEHICLE 497 Change Engine Oil Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. To assure proper engine lubrication, the engine oil must Refer to “Maintenance Schedule” for further information. be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop.
498 MAINTAINING YOUR VEHICLE The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to “Engine Compartment” in “Maintaining Your Vehicle” for further information. CAUTION! Engine Oil Change Requirements — 6.2L Supercharged Engine (If Equipped) We recommend having your oil changed and vehicle serviced by your authorized dealer.
MAINTAINING YOUR VEHICLE 499 To access these oil drains, the vehicle needs to be safely lifted and supported to remove the front underbody shields (belly pan). Your service technician will refer to the Service Manual for proper under body shield (belly pan) removal and installation procedures. Disposing Of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle.
500 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Engine Air Cleaner Filter Selection Refer to the “Maintenance Schedule” for the proper The quality of replacement engine air cleaner filters maintenance intervals. varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR® engine air cleaner filters are a high quality filter and are recomWARNING! mended. The air induction system (air cleaner, hoses, etc.
MAINTAINING YOUR VEHICLE 501 WARNING! Battery Location • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. • Battery gas is flammable and explosive. Keep flame or sparks away from the battery.
502 MAINTAINING YOUR VEHICLE CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.
MAINTAINING YOUR VEHICLE 503 CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components. Such damage is not covered by the New Vehicle Limited Warranty. Refrigerant Recovery And Recycling R134a — If Equipped R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product.
504 MAINTAINING YOUR VEHICLE 1. Remove the access door in the cowl screen by pressing 2. Unsnap both ends and lift the filter access cover. the retaining clips. Filter Access Cover Access Door 3. Remove the used filter.
MAINTAINING YOUR VEHICLE 505 4. Install the new filter with arrows pointing in the Body Lubrication direction of airflow, which is toward the rear of the Locks and all body pivot points, including such items as vehicle (text and arrows on the filter will indicate this).
506 MAINTAINING YOUR VEHICLE Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. Adding Washer Fluid The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level at regular intervals.
MAINTAINING YOUR VEHICLE 507 The fluid reservoir will hold nearly 1 gal (4 L) of washer have an authorized technician inspect the complete exfluid when the message “Low Washer Fluid” appears in haust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams the Driver Information Display (DID). or loose connections could permit exhaust fumes to seep into the passenger compartment.
508 MAINTAINING YOUR VEHICLE WARNING! (Continued) CAUTION! (Continued) • A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
MAINTAINING YOUR VEHICLE 509 NOTE: Intentional tampering with emissions control • Do not idle the engine with any spark plug wires systems can result in civil penalties being assessed disconnected or removed, such as when diagnostic against you. testing, or for prolonged periods during very rough idle or malfunctioning operating conditions.
510 MAINTAINING YOUR VEHICLE WARNING! (Continued) • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot. Coolant Checks Check engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable).
MAINTAINING YOUR VEHICLE 511 Cooling System — Drain, Flush And Refill Selection Of Coolant NOTE: Some vehicles require special tools to add coolant Refer to “Fluids, Lubricants, and Genuine Parts” in properly. Failure to fill these systems properly could lead “Maintaining Your Vehicle” for further information. to severe internal engine damage. If any coolant is needed to be added to the system please contact your local authorized dealer.
512 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze).
MAINTAINING YOUR VEHICLE 513 you use the same engine coolant (OAT coolant conform- • Use only high purity water such as distilled or deioning to MS.90032) throughout the life of your vehicle. ized water when mixing the water/engine coolant (antifreeze) solution. The use of lower quality water Please review these recommendations for using Organic will reduce the amount of corrosion protection in the Additive Technology (OAT) engine coolant (antifreeze) engine cooling system.
514 MAINTAINING YOUR VEHICLE • Mixing engine coolant (antifreeze) types is not recommended and can result in cooling system damage. If HOAT and OAT coolant are mixed in an emergency, have a authorized dealer drain, flush, and refill with OAT coolant (conforming to MS.90032) as soon as possible. Cooling System Pressure Caps The cap must be fully tightened to prevent loss of engine coolant (antifreeze), and to ensure that engine coolant (antifreeze) will return to the radiator from the coolant recovery tank.
MAINTAINING YOUR VEHICLE 515 engine coolant in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. When additional engine coolant (antifreeze) is needed to maintain the proper level, only OAT coolant that meets the requirements of Chrysler Material Standard MS.90032 should be added to the coolant bottle. Do not overfill.
516 MAINTAINING YOUR VEHICLE • Check the coolant freeze point in the radiator and in • Keep the front of the radiator clean. If your vehicle is the coolant expansion bottle. If engine coolant (antiequipped with air conditioning, keep the front of the freeze) needs to be added, the contents of the coolant condenser clean. expansion bottle must also be protected against freez• Do not change the thermostat for Summer or Winter ing. operation.
MAINTAINING YOUR VEHICLE 517 WARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency. Clean the top of the master cylinder area before removing the cap. Add fluid to bring the level up to the top of the “FULL” mark on the side of the master cylinder reservoir.
518 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir.
MAINTAINING YOUR VEHICLE 519 WARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter or moisture. Automatic Transmission recommended fluid. No chemical flushes should be used in any transmission; only the approved lubricant should be used.
520 MAINTAINING YOUR VEHICLE policy is the use of special dyes for diagnosing fluid If you notice fluid leakage or transmission malfunction, leaks. Avoid using transmission sealers as they may visit your authorized dealer immediately to have the transmission fluid level checked. Operating the vehicle adversely affect seals. with an improper fluid level can cause severe transmission damage. CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission components.
MAINTAINING YOUR VEHICLE 521 Routine fluid and filter changes are not required. How- Change Axle Fluid ever, change the fluid and filter if the fluid becomes Refer to the “Maintenance Schedule” for the proper contaminated (with water, etc.), or if the transmission is maintenance intervals. disassembled for any reason. Appearance Care And Protection From Corrosion Rear Axle Protection Of Body And Paint From Corrosion For normal service, periodic fluid level checks are not required.
522 MAINTAINING YOUR VEHICLE The following maintenance recommendations will enable Washing you to obtain maximum benefit from the corrosion • Wash your vehicle regularly. Always wash your veresistance built into your vehicle. hicle in the shade using MOPAR® Car Wash, or a mild car wash soap, and rinse the panels completely with What Causes Corrosion? clear water.
MAINTAINING YOUR VEHICLE 523 CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. • If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner.
524 MAINTAINING YOUR VEHICLE Wheel And Wheel Trim Care • All wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • To remove heavy soil and/or excessive brake dust, use MOPAR® Wheel Cleaner. NOTE: If your vehicle is equipped with Dark Vapor or Black Satin Chrome wheels DO NOT USE wheel cleaners, abrasives or polishing compounds.
MAINTAINING YOUR VEHICLE 525 • For tough stains, apply MOPAR® Total Clean, or a Your leather upholstery can be best preserved by regular mild soap solution to a clean, damp cloth and remove cleaning with a damp soft cloth. Small particles of dirt stain. Use a fresh, damp towel to remove soap residue. can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth.
526 MAINTAINING YOUR VEHICLE CAUTION! Glass Surfaces All glass surfaces should be cleaned on a regular basis with MOPAR® Glass Cleaner, or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the inside rear window equipped with electric defrosters or windows Cleaning Headlights equipped with radio antennas. Do not use scrapers or Your vehicle is equipped with plastic headlights and fog other sharp instrument that may scratch the elements.
MAINTAINING YOUR VEHICLE 527 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft cloth. Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
528 MAINTAINING YOUR VEHICLE FUSES WARNING! (Continued) WARNING! • When replacing a blown fuse, always use an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material. Failure to use proper fuses may result in serious personal injury, fire and/or property damage.
MAINTAINING YOUR VEHICLE 529 Front Power Distribution Center (Fuses) The Front Power Distribution Center is located in the engine compartment. This module contains fuses and relays. Front Power Distribution Center CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
530 MAINTAINING YOUR VEHICLE Cavity 1 2 3 Cartridge Fuse – 40 Amp Green 50 Amp Red Mini-Fuse – – – 4 5 6 7 8 9 10 30 Amp Pink 40 Amp Green 30 Amp Pink – 20 Amp Blue – – – – – – – 20 Amp Yellow 10 Amp Red 11 12 13 – – – 20 Amp Yellow 10 Amp Red – Description Fuse – Spare Radiator Fan #1 – If Equipped Power Steering #1 / Radiator Fan (6.
MAINTAINING YOUR VEHICLE 531 Cavity 14 15 16 18 19 Cartridge Fuse – – – 40 Amp Green 50 Amp Red Mini-Fuse – 20 Amp Yellow 20 Amp Yellow – – 20 21 30 Amp Pink 20 Amp Blue – – 22 23 24 28 40 Amp Green / 20 Amp Blue – Police 20 Amp Blue 20 Amp Blue – – – – – Description Fuse – Spare Left HID – If Equipped Right HID – If Equipped Radiator Fan #2 – If Equipped Power Steering #2 / Radiator Fan (6.2L Supercharged) Wiper Motor Headlamp Washers – If Equipped / Police Feed Engine Cooling Pump (6.
532 MAINTAINING YOUR VEHICLE Cavity 29 Cartridge Fuse – Mini-Fuse 15 Amp Blue 30 31 32 33 34 35 36 37 – – – – – – – – – 25 Amp Clear – – 25 Amp Clear 20 Amp Yellow 10 Amp Red 10 Amp Red 38 39 48 – – – 10 Amp Red 10 Amp Red 10 Amp Red Description Transmission Control Module (LA/LD Police) Fuse – Spare Engine Module Fuse – Spare Fuse – Spare Powertrain #1 Powertrain #2 Anti-Lock Brake Module Engine Controller/Rad Fan Relays – If Equipped Airbag Module Power Steering Module/AC Clutch Relay AWD Module
MAINTAINING YOUR VEHICLE 533 Cavity 49 50 51 52 53 Cartridge Fuse – – – – – Mini-Fuse – – 20 Amp Yellow 10 Amp Red – Description Fuse – Spare Fuse – Spare Vacuum Pump Adaptive Cruise (LD/LX) – If Equipped Fuse – Spare 7
534 MAINTAINING YOUR VEHICLE Rear Power Distribution Center (Fuses) There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays. Rear Power Distribution Center CAUTION! • When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
MAINTAINING YOUR VEHICLE 535 Cavity 2 3 4 5 Cartridge Fuse 60 Amp Yellow — 60 Amp Yellow 30 Amp Pink Mini-Fuse — — — — 6 7 8 9 10 40 Amp Green 40 Amp Green 30 Amp Pink 40 Amp Green 30 Amp Pink — — — — — 11 30 Amp Pink — Description Front PDC Feed #1 Fuse – Spare Front PDC Feed #2 Sunroof / Dome Lamp – Police Exterior Lighting #1 Exterior Lighting #2 Interior Lighting Power Locks Driver Door Control Module Passenger Door Control Module 7
536 MAINTAINING YOUR VEHICLE Cavity 12 Cartridge Fuse — Mini-Fuse 20 Amp Yellow 15 16 17 18 40 Amp Green 20 Amp Blue — 30 Amp Pink — — — — 19 20 21 — — 30 Amp Pink (6.2L Supercharged) 25 Amp Clear (LD STD) — — — — 22 20 Amp Yellow – Police 10 Amp Red – LA Description Dual USB Center Console Rear/Cigar Lighter IP – If Equipped HVAC Blower Left Spot Lamp – Police Fuse – Spare Mod Network Interface – Police Fuse — Spare Fuse — Spare Fuel Pump (6.
MAINTAINING YOUR VEHICLE 537 Cavity 23 Cartridge Fuse — Mini-Fuse 10 Amp Red 24 — 15 Amp Blue 25 26 — — 10 Amp Red 15 Amp Blue – LD/LX 25 Amp Clear – LA 30 Amp Green – LA 6.2L Supercharged 27 31 32 33 — — — — 25 Amp Clear 25 Amp Breaker 15 Amp Blue 15 Amp Blue Description Fuel Door/Diagnostic Port Integrated Center Stack – LD/LX Tire Pressure Monitor Transmission / Electronic Shift Module (LD/LX) Fuel Pump (LA) Fuel Pump (LA 6.
538 MAINTAINING YOUR VEHICLE Cavity 34 Cartridge Fuse — Mini-Fuse 10 Amp Red 35 36 — — 5 Amp Tan 15 Amp Blue 37 38 — — 20 Amp Yellow 15 Amp Blue – LD/LX 20 Amp Yellow – LA 40 41 42 — — 30 Amp Pink — — — Description Steering Column Module/Clock/Spare – Police Battery Sensor Electronic Exhaust Valve – If Equipped Radio Console Power Outlet/ Console Media Hub (LD/ LX) Power Outlet Inside Arm Rest/Console Media Hub (LA) Fuse — Spare Fuse — Spare Rear Defrost
MAINTAINING YOUR VEHICLE 539 Cavity 43 Cartridge Fuse — Mini-Fuse 20 Amp Yellow 44 — 10 Amp Red 45 — 15 Amp Blue 46 47 — — — 10 Amp Red 48 49 50 — — — 20 Amp Yellow — — Description Rear Heated Seats/ Steering Wheel Module Park Assist / Blind Spot / Rear View Camera Cluster / Rearview Mirror / Compass(LDLX)/ Humidity Sensor Fuse — Spare Adaptive Front Lighting / Auto High BEAM / Day Time Running Lamps- If Equipped Active Suspension – SRT Fuse — Spare Fuse — Spare 7
540 MAINTAINING YOUR VEHICLE Cavity 51 Cartridge Fuse — Mini-Fuse 20 Amp Yellow 52 — 10 Amp Red 53 — 10 Amp Red 54 55 56 57 58 59 60 — — — — — — — 10 Amp Red — — — 10 Amp Red 20 Amp Yellow 5 Amp Tan Description Front Heated Seats – If Equipped Heated Cupholders/Rear Heated Seat Switches – If Equipped HVAC Module/In Car Temperature Sensor Airbag Module (LA) Fuse — Spare Fuse — Spare Fuse — Spare Airbag Module (LD/LX) Adjustable Pedals – Police Heated Washer Nozzles (LD)
MAINTAINING YOUR VEHICLE 541 Cavity 61 Cartridge Fuse — Mini-Fuse 20 Amp Yellow 62 63 64 65 66 67 — — — — — — — — 25 Amp Breaker 10 Amp Red — 10 Amp Red 68 — 10 Amp Red 69 70 — — — — Description Cigar Lighter (LA) – If Equipped Fuse — Spare Fuse — Spare Rear Windows (LD/LX) Airbag Module Fuse — Spare Rain and Light Sensor/ Sunroof Dual USB Power Outlet – R/A Sense (LD/LX) Rear Sunshade (LD/LX) Fuse — Spare Fuse — Spare 7
542 MAINTAINING YOUR VEHICLE VEHICLE STORAGE ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery. REPLACEMENT BULBS • Disconnect the negative cable from the battery. All of the interior bulbs are glass wedge base or glass • Anytime you store your vehicle, or keep it out of cartridge types.
MAINTAINING YOUR VEHICLE 543 Bulb Number Door Courtesy 562 Shift Indicator Lamp JKLE14140 Center High-Mount Stop Lamp (CHMSL) LED (Serviced at Authorized Dealer) Optional Door Map Pocket/Cup Holder LED (Serviced at Authorized Dealer) For lighted switches, see your authorized dealer for replacement instructions.
544 MAINTAINING YOUR VEHICLE Rear Stop/Turn Lamp Rear Side Marker Backup Lamp License BULB REPLACEMENT LED LED LED LED Bulb Number (Serviced at Authorized (Serviced at Authorized (Serviced at Authorized (Serviced at Authorized Dealer) Dealer) Dealer) Dealer) Front Low/High Beam Headlamp And Park/Turn Lamp — Models With Halogen Headlamps NOTE: Lens fogging can occur under certain atmospheric conditions. This will usually clear as atmospheric 1. Open the hood.
MAINTAINING YOUR VEHICLE 545 CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Front Low/High Beam Headlamp And Park/Turn Lamp — Models With High Intensity Discharge Headlamps (HID) HID Headlamps The headlamps are a type of high voltage discharge tube. High voltage can remain in the circuit even with the 3.
546 MAINTAINING YOUR VEHICLE NOTE: On vehicles equipped with HID headlamps, when the headlamps are turned on, there is a blue hue to the lights. This diminishes and becomes more white after approximately 10 seconds, as the system charges. Front/Rear Side Marker Lamp Center High Mounted Stop Lamp (CHMSL) The CHMSL Lamp uses LED sources that are not serviceable separately.
MAINTAINING YOUR VEHICLE 547 FLUID CAPACITIES Fuel (Approximate) Engine Oil With Filter 6.2 Liter Supercharged Engine (SAE 0W-40, Synthetic API Certified) 6.4 Liter Engine (SAE 0W-40, Synthetic API Certified) Cooling System * 6.2 Liter Supercharged Engine (MOPAR Antifreeze/Engine Coolant (OAT coolant conforming to MS.90032) 10 Year/150,000 Mile Formula or equivalent) Intercooler (MOPAR Antifreeze/Engine Coolant (OAT coolant conforming to MS.90032) 10 Year/150,000 Mile Formula or equivalent) 6.
548 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine/Intercooler Coolant Engine Oil Engine Oil Filter Spark Plugs Fuel Selection Fluid, Lubricant, or Genuine Part We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS.90032. For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils.
MAINTAINING YOUR VEHICLE 549 CAUTION! CAUTION! (Continued) • Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze).
550 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir — If Equipped Rear Axle Fluid, Lubricant, or Genuine Part Use only MOPAR® ZF 8&9 Speed ATF™ Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. We recommend you use MOPAR® DOT 3 brake fluid. If DOT 3 brake fluid is not available, then DOT 4 is acceptable.
MAINTENANCE SCHEDULES CONTENTS ! MAINTENANCE SCHEDULE . . . . . . . . . . . . .552 ▫ Maintenance Chart . . . . . . . . . . . . . . . . . . . .
552 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE Based on engine operation conditions, the oil change indicator message will illuminate. This means that service is required for your vehicle. Have your vehicle serviced as soon as possible, within the next 500 miles (805 km). The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability.
MAINTENANCE SCHEDULES 553 Your authorized dealer will reset the oil change indicator • Inspect the battery, and clean and tighten the terminals message after completing the scheduled oil change. If a as required. scheduled oil change is performed by someone other • Check the fluid levels of the coolant reservoir, brake than your authorized dealer, the message can be reset by master cylinder, and power steering (6.2L Only), and referring to the steps described under “Driver Informaadd as needed.
554 MAINTENANCE SCHEDULES 48,000 54,000 60,000 66,000 72,000 78,000 84,000 90,000 96,000 36 42 48 54 60 66 72 78 84 90 96 Or Kilometers: 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 160,000 170,000 180,000 190,000 200,000 210,000 220,000 230,000 240,000 250,000 150,000 42,000 30 70,000 144,000 36,000 24 60,000 138,000 30,000 18 50,000 132,000 24,000 12 40,000 126,000 18,000 6 30,000 120,000 12,000 Or Months: 20,000 114,000 6,0
Or Kilometers: 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 160,000 102 108 114 120 126 132 138 144 150 If using your vehicle for any of the following: dusty or offroad conditions. Inspect the engine air cleaner filter; replace if necessary. X Inspect the brake linings; replace if necessary. X X X X X X X X X X X X Inspect the CV joints. X X X X X X X X X X X X Inspect the exhaust system.
Or Kilometers: 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 160,000 Adjust the parking brake on vehicles equipped with four wheel disc brakes. X X Change the rear axle fluid if using your vehicle for any of the following: police, taxi, fleet or frequent trailer towing. Inspect the rear axle fluid.
Or Kilometers: 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 160,000 Inspect front suspension, tie rod ends, and boot seals, for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary. X X X X X X X 102 108 114 120 126 132 138 144 150 X X X X 8 Replace the engine air cleaner filter. Replace the air conditioning filter.
12,000 18,000 24,000 30,000 36,000 42,000 48,000 54,000 60,000 66,000 72,000 78,000 84,000 90,000 96,000 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 Or Kilometers: Inspect and replace the PCV Valve if necessary Replace the spark plugs – 6.2L Supercharged Engine ** Replace the spark plugs – 6.
12,000 18,000 24,000 30,000 36,000 42,000 48,000 54,000 60,000 66,000 72,000 78,000 84,000 90,000 96,000 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 Or Kilometers: Flush and replace the engine coolant/ intercooler at 120 months if not done at 150,000 miles (240,000 km). ** The spark plug change interval is mileage based only, yearly intervals do not apply.
560 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ! SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . .563 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY). . . . . . . . . . . . . . . . . . .565 ▫ Prepare For The Appointment. . . . . . . . . . . . .563 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . .565 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . .563 ! WARRANTY INFORMATION . . . . . . . . . . . . .
562 IF YOU NEED CONSUMER ASSISTANCE ! DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES . . . . . . . . . . . . . . . . .569 ▫ Treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .569 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . . .569 ▫ Temperature Grades. . . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 563 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment Be Reasonable With Requests If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it is advisable to make these arrangements when you call for an appointment.
564 IF YOU NEED CONSUMER ASSISTANCE facilities, factory-trained technicians, special tools, and Chrysler Group LLC Customer Center the latest information to ensure the vehicle is fixed P.O. Box 21–8004 correctly and in a timely manner. Auburn Hills, MI 48321–8004 This is why you should always talk to an authorized dealer service manager first. Most matters can be re- Phone: (800) 423-6343 solved with this process. Chrysler Canada Inc.
IF YOU NEED CONSUMER ASSISTANCE 565 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1-800-380-CHRY. Warranty expires.
566 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You will be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 567 defect to the Canadian government should contact Transport Canada, Motor Vehicle Defect Investigations and Recalls at 1-800-333-0510 or go to http://www.tc.gc.ca/ roadsafety/ If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer.
568 IF YOU NEED CONSUMER ASSISTANCE Service Manuals Owner’s Manuals These comprehensive Service Manuals provide the information that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintaining, servicing, and repairing Chrysler Group LLC vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts.
IF YOU NEED CONSUMER ASSISTANCE 569 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate. The following tire grading categories were established by the National Highway Traffic Safety Administration.
570 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
572 INDEX About Your Brakes . . . . . . . . . . . . . . . . . . . . . . . .403 ABS (Anti-Lock Brake System) . . . . . . . . . . . . . . . .406 Adaptive Cruise Control (ACC) (Cruise Control) . . .169 Adding Engine Coolant (Antifreeze) . . . . . . . . . . . .512 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .455 Adding Washer Fluid . . . . . . . . . . . . . . . . . . . . . .506 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .453 Adjustable Pedals . . . . . . . . . .
INDEX 573 Alarm (Security Alarm) . . . . . . . . . . . . . . . . . . . . . .18 Alarm System (Security Alarm) . . . . . . . . . . . . . . . .18 Alterations/Modifications, Vehicle . . . . . . . . . . . . . . .7 Antifreeze (Engine Coolant) . . . . . . . . . . . . . . . . . .511 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .514 Anti-Lock Brake System (ABS) . . . . . . . . . . . . . . . .406 Anti-Lock Warning Light . . . . . . . . . . . . . . . . . . . .251 Appearance Care . . . . . . . .
574 INDEX Brake Fluid . . . . . . . . . . . . . Brake, Parking . . . . . . . . . . . Brakes . . . . . . . . . . . . . . . . . Brake System . . . . . . . . . . . . Anti-Lock (ABS) . . . . . . . . Fluid Check . . . . . . . . . . . Master Cylinder . . . . . . . . Parking . . . . . . . . . . . . . . Warning Light . . . . . . . . . Brake/Transmission Interlock . Brightness, Interior Lights . . . Bulb Replacement . . . . . . . . . Bulbs, Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 575 Lower Anchors And Tethers For Children . . . . . . .80 Older Children And Child Restraints . . . . . . . . . .76 Seating Positions . . . . . . . . . . . . . . . . . . . . . . . .79 Child Safety Locks . . . . . . . . . . . . . . . . . . . . . . . . .32 Clean Air Gasoline . . . . . . . . . . . . . . . . . . . . . . . .451 Cleaning Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .524 Climate Control . . . . . . . . . . . . . . . . . . . . . . . . . .337 Automatic . . . . . . . . .
576 INDEX Dealer Service. . . . . . . . . . . . . . . . . . . . . . . . . . . .495 Deck Lid, Emergency Release . . . . . . . . . . . . . . . . .44 Deck Lid, Power Release . . . . . . . . . . . . . . . . . . . . .42 Defroster, Rear Window. . . . . . . . . . . . . . . . . . . . .243 Defroster, Windshield . . . . . . . . . . . . . . . . . . . . . . .98 Delay (Intermittent) Wipers . . . . . . . . . . . . . . . . . .156 Diagnostic System, Onboard . . . . . . . . . . . . . . . . .493 Dimmer Switch, Headlight. .
INDEX 577 Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . .478 Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . .464 Emergency Trunk Release . . . . . . . . . . . . . . . . . . . .44 Emission Control System Maintenance . . . . . . . . . .493 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .491 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . .500 Block Heater . . . . . . . . . . . . . . . . . . . . . . . . . .374 Checking Oil Level . . .
578 INDEX Engine Oil . . . . . . . . . . . . . . . . . Engine Oil Disposal . . . . . . . . . . Flashers . . . . . . . . . . . . . . . . . . . . . Hazard Warning . . . . . . . . . . . . . Turn Signal . . . . . . . . . . . . . . . . Flash-To-Pass . . . . . . . . . . . . . . . . . Flooded Engine Starting . . . . . . . . . Floor Console . . . . . . . . . . . . . . . . . Fluid, Brake . . . . . . . . . . . . . . . . . . Fluid Capacities . . . . . . . . . . . . . . . Fluid Leaks . . . . . . . . . . . . . . . . .
INDEX 579 Gasoline, Reformulated . . . . Gauges Coolant Temperature . . . . Fuel . . . . . . . . . . . . . . . . Odometer . . . . . . . . . . . . Speedometer . . . . . . . . . Tachometer . . . . . . . . . . . Gear Ranges . . . . . . . . . . . . General Information . . . . . . Glass Cleaning . . . . . . . . . . Gross Axle Weight Rating . . Gross Vehicle Weight Rating. GVWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .451 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
580 INDEX Hood Release . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 Key Fob Arm The Alarm . . . . . . . . . . . . . . . . Ignition Lock The Doors . . . . . . . . . . . . . . . . Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Panic Alarm . . . . . . . . . . . . . . . . . . . Illuminated Entry . . . . . . . . . . . . . . . . . . . . . . . . . .20 Programming Additional Key Fobs . . Immobilizer (Sentry Key) . . . . . . . . . . . . . . . . . . . .
INDEX 581 Keyless Go. . . . . . . . . . . Key, Replacement . . . . . . Keys . . . . . . . . . . . . . . . Key, Sentry (Immobilizer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 .17 .12 .16 Lane Change and Turn Signals . . . . . . . . . . . . . . . .150 Lane Change Assist . . . . . . . . . . . . . . . . . . . . . . . .151 LaneSense . . . . . . . . . . . . . . . . . . . . . . .
582 INDEX Lights On Reminder . . . . . . . . . . . . . . . . . . . . .149 Malfunction Indicator (Check Engine) . . . . . . . . .251 Parade Mode (Daytime Brightness) . . . . . . . . . . .155 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . . . .251 Security Alarm . . . . . . . . . . . . . . . . . . . . . . . . .251 Service . . . . . . . . . . . . . . . . . . .
INDEX 583 Electric Powered . . . . . . . . . . . . . . . . . . . . . . . .117 Change Interval . . . . . . . . . . . . . . . . . . . . . . . .497 Electric Remote . . . . . . . . . . . . . . . . . . . . . . . . .117 Checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .497 Exterior Folding . . . . . . . . . . . . . . . . . . . . . . . .116 Dipstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .497 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 Disposal . . .
584 INDEX Parking Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . .403 ParkSense® System, Rear. . . . . . . . . . . . . . . . . . . .206 Passing Light . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 Passive Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Pedals, Adjustable. . . . . . . . . . . . . . . . . . . . . . . . .163 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271 Pets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 585 Recorder, Event Data . . . . . . . . . . . . . . . . . . . . . . .72 Recreational Towing . . . . . . . . . . . . . . . . . . . . . . .461 Reformulated Gasoline . . . . . . . . . . . . . . . . . . . . .451 Refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .503 Reminder, Lights On . . . . . . . . . . . . . . . . . . . . . . .149 Reminder, Seat Belt. . . . . . . . . . . . . . . . . . . . . . . . .46 Remote Control Starting System . . . . . . . . . . . . . . . . . . . . . . . . .
586 INDEX Safety, Exhaust Gas. . . . . . . . . . . . . . . . . . . . . . . . .97 Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Safety Information, Tire . . . . . . . . . . . . . . . . . . . . .418 Front Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Schedule, Maintenance . . . . . . . . . . . . . . . . . . . . .
INDEX 587 Tilting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 Security Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Arm The System . . . . . . . . . . . . . . . . . . . . . . . .19 Selection of Coolant (Antifreeze). . . . . . . . . . . . . . .548 Selection of Oil . . . . . . . . . . . . . . . . . . . . . . . . . . .497 SENTRY KEY® FCC General Information . . . . . . . . . . . . . . . . . .18 Key Programming . . . . . . . . . . . . . . . . . . . . . . .
588 INDEX Steering Column Controls . . . . . . . . . . . . . . . . . . . . . . .150 Tilt Column . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Wheel, Heated . . . . . . . . . . . . . . . . . . . . . . . . .162 Wheel, Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Steering Wheel Audio Controls . . . . . . . . . . . . . . .334 Steering Wheel Mounted Sound System Controls . . .334 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .542 Storage, Vehicle. . . . . .
INDEX 589 Replacement . . . . . . . Rotation . . . . . . . . . . Safety . . . . . . . . . . . Sizes . . . . . . . . . . . . Snow Tires . . . . . . . . Spinning . . . . . . . . . Tread Wear Indicators Tire Safety Information . Tire Service Kit . . . . . . . To Open Hood . . . . . . . Towing . . . . . . . . . . . . Behind a Motorhome . Recreational . . . . . . . Towing Vehicle Behind a Traction . . . . . . . . . . . . Traction Control . . . . . . Trailer Towing . . . . . . . Transmission Automatic . . . . .
590 INDEX Uconnect® Settings. . . . . . . . . . . . . . . . . . . . . . . . .22 Customer Programmable Features . . . . . . . . . . . .34 Passive Entry Programming . . . . . . . . . . . . . . . . .34 Uconnect® Settings . . . . . . . . . . . . . . . . . . . . . .295 Uconnect® Voice Command. . . . . . . . . . . . . . . . . .350 Uniform Tire Quality Grades . . . . . . . . . . . . . . . . .569 Universal Consumer Interface (UCI) Connector . . . .333 Unleaded Gasoline . . . . . . . . . . . . . . . . . . . . . . .
INDEX 591 Fluid . . . . . . . . . . . . . Windshield Wiper Blades . Windshield Wipers . . . . . Wiper Blade Replacement Wipers, Intermittent . . . . Wipers, Rain Sensitive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .506 .506 .155 .506 .156 .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 15Y532-126-AA First Edition Printed in U.S.A.
