User Guide Manual

Receiving A Call Accept (And End)
When an incoming call rings/is announced on Uconnect
®
,pushthePhonebutton .
•Toendacall,pushtheHangUporPhonebutton .
Mute (Or Unmute) Microphone During Call
•Duringacall,presstheMutebuttononthePhonemainscreentomuteandunmute
the call.
Transfer Ongoing Call Between Handset And Vehicle
•Duringanon-goingcall,presstheTransferbuttononthePhonemainscreento
transfer an on-going call between handset and vehicle.
Phonebook
The Uconnect
®
system will automatically sync your phonebook from your paired phone, if
this feature is supported by your phone. Phonebook contacts are updated each time that
the phone is connected. If your phone book entries do not appear , check the settings on
your phone. Some phones require you to enable this feature manually.
•YourphonebookcanbebrowsedontheUconnect
®
system touchscreen, but editing
can only be done on your phone. To browse, press the “Phone” button on the
touchscreen, then the “Phonebook” button on the touchscreen.
Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are
shown at the top of the main phone screen.
Voice Command Tips
•Speakingcompletenames(i.e;CallJohnDoevs.CallJohn)willresultingreatersystem
accuracy.
•Youcanlinkcommandstogetherforfasterresults.SayCallJohnDoe,mobile,for
example.
•Ifyouarelisteningtoavailablevoicecommandoptions,youdonothavetolistentothe
entire list. When you hear the command that you need, push the
button on the
steering wheel, wait for the beep and say your command.
Changing The Volume
Start a dialogue by pushing the Phone button ,thensayacommandforexample-
"Help".
•UsetheradioVOLUME/MUTErotaryknobtoadjustthevolumetoacomfortablelevel
while the Uconnect
®
system is speaking. Please note the volume setting for Uconnect
®
is different than the audio system.
NOTE:
To a c c ess hel p , push the Uconnect
®
Phone button on the steering wheel and say
"help." Press the display or press either the Phone
or VR button and say
"cancel" to cancel the help session.
ELECTRONICS
139