User Guide Manual

E-85 FLEXIBLE FUEL — (3.6L ENGINE ONLY)
Refer to your Owner's Manual on the DVD for further details.
CAUTION!
Only vehicles with the E-85 fuel filler door label or a yellow gas cap can operate on
E-85.
Chassis
Component Fluid, Lubricant, Or Genuine Part
Automatic Transmission – 8-Speed Trans-
mission
Use only MOP AR
®
ZF 8&9 Speed ATF™
Automatic Transmission Fluid, or equiva-
lent. Failure to use the correct fluid may
affect the function or performance of your
transmission.
Brake Master Cylinder W e recommend you use MOPAR
®
DOT 3
and SAE J1703. If DOT 3 brake fluid is not
available, then DOT 4 is acceptable.
Front Axle W e recommend you use MOPAR
®
Synthetic
Gear Lubricant SAE 75W90 (API GL-5).
Rear Axle W e recommend you use MOPAR
®
OD Syn-
thetic Gear Lubricant SAE 75W85 (API
GL-5).
Transfer Case We recommend you use MOPAR
®
Transfer
Case Lubricant for BorgWarner 44–40.
FLUIDS, LUBRICANTS AND GENUINE PARTS — SRT
Engine
Component Fluid, Lubricant, or Genuine Part
Engine/Intercooler 6.2L
Coolant
We recommend you use MOPAR
®
Antifreeze/Coolant 10
Year/150,000 Mile Formula OAT coolant conforming to
MS.90032.
Engine 6.4L Coolant W e recommend you use MOP AR
®
Antifreeze/Coolant 10
Year/150,000 Mile Formula OAT coolant conforming to
MS.90032.
Engine Oil For best performance and maximum protection under all
types of operating conditions, the manufacturer only recom-
mends full synthetic engine oils.
The manufacturer recommends the use of Pennzoil UltraTM
0W -40 or equivalent MOP AR
®
engine oil meeting the re-
quirements of Chrysler Material Standard MS-12633 for
use in all operating temperatures.
MAINTAINING YOUR VEHICLE
200